Full Throttle Hobbies

KYOSHO PIPER CHEROKEE READYSET MINIUM AD

Ailerons and high power motor controlled with advanced multi-function transmitter. The micro airplane that took the world by storm takes another giant step with full 4-channel control! The fascinating slow flight style realized through the amazing MINIUM airplane that can fit on the palm of your hand now has the same 4-channel control as full-size airplanes with aileron, elevator, rudder and throttle control. The addition of ailerons for direct control over the roll axis delivers real airplane flight control. The newly developed 4-channel R/C system also features a large LCD. Additional functions increase exposure to flying situations for developing technique with the realistic scale form of the airplane enhancing the overall experience. As one of the best and longest selling low-wing airplane models of all time, the Piper Cherokeehas been recreated as a MINIUM model with a wing span of 410mm. WithHyper Motordelivering 10% more power than previous MINIUM models and equipped with a newly designed propeller as standard, this model can be flown outdoors as well as inside (with wind speeds under 2mph). And it is fully pre-assembled and fitted with an ultra-small control unit with built-in amp, receiver, 3 servos, and pre-set linkages. In addition, the newly developed 4-channel R/C system operates on the worldwide standard 2.4GHz frequency. Switch the power on and it automatically scans a 75 wave spectrum for open bands for a stable control system safe from radio interference, allowing up to 24 airplanes to flown at the same time. Taste the 3 dimensional experience of airplane flight with the slow flight and light maneuvers made possible with this amazing fully-functional micro-sized MINIUM airplane. FEATURES: * Fixed main wing doesn't need to be detached. Unique cambered wing type produces plenty of lift for slow stable flight control and at the same time floats on slow banking turns. * Addition of ailerons provides direct control of the roll axis for greater maneuverability. Features separate motor and connector-type servo. Maintenance-friendly features include easy replacement of gear shaft. * Newly developed multifunction 4-channel PERFEX KT-20 transmitter features a large LCD to display data for voltage, digital trim offset values and control mode. Provides complete visibility of control settings and allows easy use of additional functions. * Transmitter also features built-in battery charger. Just connect the Li-Po battery and charging commences until the charger cuts out automatically when battery is fully charged. Charger function can be used while operating as transmitter so you can charge a spare battery (sold separately) at the same time. * Newly developed R/C system operates on world standard ISM band on high frequency 2.4GHz. Scans the 75-wave spectrum to use clear frequencies for an extremely safe control system. Allows up to 24 aircraft to be flown at the same time. * All control inputs are equipped with 19-step digital trims for precise setting and adjustment. Trim values are displayed for clear visibility and easy management of control settings. * Completely assembled Readyset includes newly developed 4-channel 2.4GHz KT-20 radio control system and special Lithium Polymer battery pack. The transmitter can be registered to and used with a 2nd or even a 3rd airplane. Also, change the mode and the transmitter can be used with the MINIUM AD helicopter. *Cannot be used with 3-channel MINIUM airplanes. * Equipped with 6mmHyper Motorthat delivers 10% more power than the previous motor in the 3-channel version. * Increased thrust from the newly designed (D95 X P75mm) propeller included as standard. * Transmitter features built-in quick battery charger that can be used while the transmitter is being used for flight control. *Takes about 20 minutes to fully charge.*Charging duration may change depending on conditions. * Selected flight style mode (Mode I or Mode II) is shown on the display. * Slow flight capability allows flight times of about 10 minutes with a fully charged battery. * Comes in 2 color options (Blue & Red) TECHNICAL SPECS: * Kyosho Classification: Minium AD * Length: 13.19" (335mm) * Wingspan: 16.14" (410mm) * Gear Ratio: 4.25:1 * Radio: PERFEX KT-20 2.4GHz 4-channel MINIUM AD Special R/C System (new design) * Dihedral: 11 deg * Scale: 1/24 * Charge time: 20 minutes * Range: 500 feet * Colors: Red or Blue * REQUIRES: (4) "AA" alkaline batteries for transmitter ACCESSORIES & EXTRAS: * Venom or Energizer "AA" Alkaline Batteries (4 needed)

HPI SAVAGE FLUX HP 1/8 BRUSHLESS TRUCK RTR w/2.4Ghz Radio

Now Includes 2.4Ghz Spread Spectrum Radio System! The all-new HPI Savage Flux HP is guaranteed to wow you and your friends! Powered by the high technology Flux Tork 2200 motor and twin battery packs, you will be pulling wheelies and getting air at the twitch of a finger. Easy plug-and-go convenience is the hallmark of electric RC vehicles like the Savage Flux HP. Just plug in two matching battery packs and you are off and running! The Flux Blur electronic speed control can handle massive amounts of power, and you can use up to 16 NiMH cells or 2 LiPo batteries (either 2S or 3S type). Want to hit the speed limit with your monster truck? The Savage Flux HP makes it easy! With twin 3S LiPo batteries and on-road tires like our #4729 or #4731 mounted Phaltlines the Savage Flux HP can achieve a blistering top speed of 62 mph (100kph)! The Savage Flux HP is equipped with tough option parts to help it handle the power of the Flux Tork 2200 motor. We've equipped it with an all-metal gear transmission, steel spur gear, super heavy-duty dogbones, machine cut diff gears, 2.5mm TVP chassis plates, 3mm 7075 motor plate and dual 8mm billet motor clamps! NOW INCLUDES: High Quality 2.4GHz Spread Spectrum Radio! The reliable and sturdy HPI TF-20 2.4GHz radio controls the Savage Flux HP, giving you superb control in a well-designed pistol-grip radio! The steering wheel design makes you feel as if you're actually driving the truck, and the trigger-style throttle and brake controls provide you with finger-sensitive action when accelerating and stopping! The radio transmitter features DSSS technology that eliminates the need for frequency crystals so you can drive with your friends without worrying about frequency conflicts or interference. The TF-20 has servo reverse switches, easy access to radio adjustments and simple AA battery replacement. The RF-20 receiver takes the commands from the transmitter and transfers them reliably to the Flux Blur ESC and the steering servo. Taking care of the steering duties for the Savage Flux HP is the tough metal-gear HPI SF-50 high-torque servo, which has plenty of grunt to turn the front wheels at low and high speeds, in any sort of terrain. A truck this size needs the power and torque of a strong servo, and the SF-50 is just the ticket. The HPI TF-20 radio gives you long-range and reliable communication with your truck. If you ever want to upgrade your electronics you'll find it extremely easy, because all of the electronics are standard-size RC components with standardized connectors. The components can be upgraded or replaced whenever you like, or even moved into a different RC vehicle in the future. The Savage Flux HP will accept any standard-size servos. FEATURES: Extra-Low CG Twin Battery Power Flux Tork 2200 Motor Flux Blur ESC Now Includes High Quality 2.4GHz Spread Spectrum Radio All-Metal Transmission Gears XL Tough Suspension Machined Diff Gears Thick Super Heavy-Duty Dogbones Machined Steel Spur Gear Big Bore Nylon Shocks SF-5 High Torque Metal Gear Steering Servo Savage Wheelie Bar Incluced All-Terrain Tires GT-2 Bodyshell with All-New Flame Paint Scheme TECHNICAL SPECS: LENGTH: (21in.) 533mm WIDTH: (16.8in.) 427mm HEIGHT: (10in.) 254mm WHEELBASE: (13.6in.) 345mm REQUIRES: (8) "AA" alkaline batteries for transmitter; (2) 6-8 cell NiMh flat or 2S-3S LiPo batteries; (1) Appropriate charger for batteries selected ACCESSORIES & EXTRAS: Alkaline Batteries for Transmitter (8 needed) 6-8 cell NiMh flat or 2S-3S LiPo batteries (2 needed) Charger Castle Link USB Programming Kit Click picture to enlarge

TRAXXAS RALLY VXL 1/16 BRUSHLESS RALLY RACER

30+mph Out Of The Box . . . 50+mph All-Out! The throttle is wide open. All four tires howl as they slide across the asphalt. You finesse the input, work the steering wheel. Now youre perfectly balanced between slip and grip as you carve through the turn sideways, emerging from clouds of tire smoke to scream on to the next corner. This is asphalt rally racing gymkhana style, and the Traxxas Rally VXL is the only R/C vehicle designed to give you the experience of hanging it out in the turns and powering down the straights with the perfect blend of speed, power, and traction. The specially tuned suspension and tire compounds let you ride the slip angle with thrilling precision, putting your skills to the test as you master the art, right in your own driveway. The Velineon brushless power system combines with 4-wheel drive to give the Traxxas Rally VXL road-ripping muscle that rivals the full-scale racers. Officially licensed BFGoodrich rally tires deliver authentic style and performance, and the tough, wide-body design features cutting-edge graphics that could only come from Traxxas. Get ready for a new kind of R/C driving excitement with the Traxxas Rally VXL. Revo Innovation, Tuned for the Street! The Traxxas Rally VXL utilizes Revo's F-1 inspired, rocker-actuated suspension system which has been expertly engineered for 1/16 Gymkhana racing right down to the oil-filled, threaded-body GTR shocks and rally-tuned progressive-rate springs. The all-wheel drive system rides on full ball-bearings and delivers smooth efficient power through the Torque Control slipper clutch, planetary gear differentials, and Traxxas' proven telescoping u-joint drive shafts. The suspension and driveline are fully integrated into the compact chassis. Intricately molded as a single piece, the chassis balances strength, weight, function and style in an impressive achievement of packaging and performance optimization that could only come from Traxxas. Race-Ready Speed The Traxxas Rally VXL shreds the competition with class-leading speed and power. Right out of the box, the Rally thrills with 30+mph on the included 6-cell NiMH battery. Install an optional, second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and the Rally jumps to over 50mph. That kind of blacktop-searing speed is usually reserved for expensive LiPo power, but the Rally reaches its full performance potential with affordable, proven-safe NiMH packs. It's never been so easy to go so fast! Rally VXL includes the Traxxas TQ 2.4GHz High Output radio system with Traxxas Link. This new system offers the unbeatable convenience of no channels, no crystals 2.4Ghz technology, and the long-range security of a high-output signalbut thats just the beginning. The new, patent-pending Traxxas Link technology stores settings for up to 20 Traxxas Link-enabled models, with no naming or model memory settings required. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQ 2.4GHz High Output radio is also fully adjustable; steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. Velineon Brushless Power Built specifically for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives the Rally precise throttle control and blistering top speed. Patent-pending Training Mode lets new drivers hone their skills at 50% throttle. This allows young or new drivers to safely develop their control skills before unleashing 50+mph speed with the touch of the EZ-Set button. Big speed requires big horsepower, so the Rally carries the largest motor in the "mini" category. The Velineon 380 features high-speed ball bearings, Sintered rotor, Neodymium magnets, and Gold plated 3.5mm connectors. It all adds up to 50,000 rpm of pure power and track-searing speed! Waterproof Electronics For No-Limits R/C Excitement Just like full-size rally racers, the Traxxas Rally doesn't slow down for rain; the waterproof servo and o-ring-sealed receiver box let you keep on racing, even in wet weather that parks lesser cars on the bench. The patent-pending sealed receiver box houses Traxxas' latest 2.4GHz Traxxas Link receiver and can accept aftermarket receivers as well, without compromising the model's waterproof properties. The new VXL-3m electronic speed control and high-torque digital micro servo are sealed against the elements to give you total driving freedom. 100% Ready-To-Race The Traxxas Rally VXL is fully assembled with TQ radio system, Velineon brushless power system, painted and decaled body, pre-glued tires, and detailed instructions. A Traxxas Power Cell NiMH battery and charger are also included, making the Rally truly Ready-To-Race. Designed specifically for the high-power needs of the Velineon brushless system, the potent Power Cell pack features heavy-duty construction, 16-gauge wires and Traxxas' exclusive High-Current Connector for efficient power transfer, run after run. Traxxas backs the Rally and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows the Rally to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your R/C experience is easy and fun (and fast!). Follow the details link above to go in depth on all the Rally performance benefits and also be sure to check out the videos page to see it in action for yourself. FEATURES: * Officially licensed BFGoodrich rally tires * Realistic tread pattern and specially formulated rubber compound * Tough rally-inspired body design features cutting edge graphics * Realistic Split-Spoke rally wheels (1.9 diameter, 12mm hex) * Impact absorbing foam front bumper * Adjustable height body mounts * TQ 2.4GHz High Output transmitter with Traxxas Link o Automatically stores and loads settings for up to 20 Traxxas Link-enabled modelsjust switch on and drive, model selection is not required. o Multi-Function knob o Adjustable steering and throttle percentage (dual rates) o Adjustable steering and throttle sensitivity (exponential) o Adjustable steering and throttle end points o High 13ms frame rate and near-zero latency for responsive control o 5-channel micro receiver with dual channel-1 inputs * Race-winning, F1-inspired Revo suspension technology and E-Revo integrated chassis design, perfectly optimized for 1/16 scale * Powered by the Velineon Brushless Power System * Traxxas High-Current Connector allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System * Velineon VXL-3m Electronic Speed Control o LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection o Sport Mode Forward / Brake / Reverse o Race Mode Forward / Brake o Training Mode - 50% Forward / Brake / 50% Reverse (patent pending) * Velineon 380 Brushless Motor o High-performance sensorless design o High-strength Neodymium magnets o Efficient, high-speed ball bearings o Precision-balanced rotor o Gold-plated 3.5mm bullet connectors * Digital High-Torque Waterproof Micro Steering Servo * Waterproof, o-ring sealed receiver box * Sealed, silicone-filled differentialsan industry first in 1/16 scale * Torque-Control slipper clutch system * Telescoping universal-joint driveshafts * Rubber-sealed ball bearings * External gear cover with easy slipper access * Rocker-actuated shocks provide true progressive damping and spring rates * Threaded-body, oil-filled shocks permit fast, precise preload adjustments and deliver smooth, consistent damping * Suspension is precision tuned for on-road performance * Fiber-composite monocoque chassis * Speed control and receiver are securely fastened to chassis * Integrated battery compartments with intake and exit cooling vents * Quick-release battery doors for fast pack changes * Full line of genuine Traxxas accessories available * Traxxas Rally is backed by unparalleled Traxxas support and parts availability TECHNICAL SPECS: Traxxas Rally VXL Specs ACCESSORIES & EXTRAS: * 7.2V NiMh 2/3A Stick Battery Packs (1 or 2 used) * Peak Charger * Alkaline Batteries for Transmitter (8 needed)

ALIGN T-REX 600 ESP SUPERIOR COMBO - Blue CNC

600ESP Superior Combo Includes Everything Below. All You Need is a Radio System, Pitch Gauge & Li-Po Battery FEATURES: * Electric power system. * All metal main blade control system, resulting in enhanced durability and control precision. * High quality pre-painted fiberglass canopy. * CNC machined main gear for excellent balance and stability. * High speed thrust bearings in the tail blade grips. * Redesigned collective control arms for increase smoothness. * High efficiency torque tube drive system. * 2mm high strength low weight carbon frames for easier assembly and maintenance. * Carbon Fiber Tail Blades * Fully Driven Tail Auto Rotation System * Rear Tail Servo Mount * 10mm Hollow Main Shaft, 8mm Spindle * BLUE CNC VERSION INCLUDES: * T-REX 600ESP Kit * 600D Carbon fiber blade * Fiberglass canopy * Standard Landing skid * RCE-BL100G 100A Brush-less ESC (Governor Mode) * REC-B6X External BEC X1 * 5.1V Two-way step-down voltage regulator * Li-Polymer 7.4V 1900mAh 18C For BEC * 600M Brush-less motor * GP780 Head Lock Gyro * DS610 Digital Servo (3) * DS620 Digital Servo (1) TECHNICAL SPECS: * Length: 1160mm(45.67 in) * Height: 400mm(15.75 in) * Main Blade Length: 600mm * Main Rotor Diameter: 1350mm(53.15 in) * Tail Rotor: 240mm (9.45 in) * Motor Drive Gear: 14T (15T optional) * Main Drive Gear: 170T * Auto-rotation Tail Drive Gear: 180T * Tail Drive Gear: 40T * Drive Gear Ratio: 1:12.14:4.5/1:11.33:4.5 * Weight (w/o main blade): 2450g (5.4 lbs) * Flying Weight: Approx 3300g (7.3 lbs) * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 22.2V 6S Li-Po battery Click picture to enlarge

ALIGN T-REX 600 ESP SUPERIOR COMBO - Black CNC

Align 600ESP Superior Combo Includes Everything Below. All You Need is a Radio System, Pitch Gauge & Li-Po Battery FEATURES: * Electric power system. * All metal main blade control system, resulting in enhanced durability and control precision. * High quality pre-painted fiberglass canopy. * CNC machined main gear for excellent balance and stability. * High speed thrust bearings in the tail blade grips. * Redesigned collective control arms for increase smoothness. * High efficiency torque tube drive system. * 2mm high strength low weight carbon frames for easier assembly and maintenance * Carbon Fiber Tail Blades * Fully Driven Tail Auto Rotation System * Rear Tail Servo Mount * 10mm Hollow Main Shaft, 8mm Spindle * BLACK CNC VERSION INCLUDES: * T-REX 600ESP Kit * 600D Carbon fiber blade * Fiberglass canopy * Standard Landing skid * RCE-BL100G 100A Brush-less ESC(Governor Mode) * REC-B6X External BEC X1 * 5.1V Two-way step-down voltage regulator * Li-Polymer 7.4V 1900mAh 18C For BEC * 600M Brush-less motor * GP780 Head Lock Gyro * DS610 Digital Servo (3) * DS620 Digital Servo (1) TECHNICAL SPECS: * Length: 1160mm(45.67 in) * Height: 400mm(15.75 in) * Main Blade Length: 600mm * Main Rotor Diameter: 1350mm(53.15 in) * Tail Rotor: 240mm (9.45 in) * Motor Drive Gear: 14T (15T optional) * Main Drive Gear: 170T * Auto rotation Tail Drive Gear: 180T * Tail Drive Gear: 40T * Drive Gear Ratio: 1:12.14:4.5/1:11.33:4.5 * Weight (w/o main blade): 2450g (5.4 lbs) * Flying Weight: Approx 3300g (7.3 lbs) * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 22.2V 6S Li-Po battery Click picture to enlarge

Redcat Racing Tornado S30 1/10 Scale

Tornado S30 1/10 Scale Nitro Buggy 2.4GHz The Tornado S30 replaces the Tornado BB. We upgraded the popular Tornado BB with an SH brand engine, performance header and aluminum tuned exhaust. !ALERT! Local climatology experts indicate threat of a forceful competitor both on and off the trackThis nitro 1/10 scale buggy comes complete with a powerful 3.0cc .18 SH engine, ball joint suspension, two-speed transmission, aluminum tuned exhaust, performance header, aluminum alloy chassis and oil- filled aluminum bodied shocks. The Tornado S30; in its element on the track, off road or just bashing around. This vehicle is sure to handle all of your nitro-fueled RC buggy adventures. Major funnel clouds have been reported from these high performance off road buggies! Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.0cc .18 SH Transmission Centrifugally Shifted 2-Speed Drive System 4 Wheel Drive Length 400mm Width 250mm Height 160mm Wheelbase 275mm (F/R) Ground Clearance 26mm Fuel Tank Capacity 75cc Chassis Type 2.5mm 6061 Aluminum Brake Type Composite Disc Shocks Aluminum Body Oil Filled Speed Control Battery Radio System 2.4 Ghs Click picture to enlarge

XTM XT2e 1/8 RTR Brushless Electric Buggy

The XT2e brushless buggy comes in at the top of its class in system reliability, compatibility and price. R/C drivers have come to realize that in order to have a competitive 1/8 Off Road Electric Buggy, it's extremely important to have a compatible system composed of a reliable electronic speed control and a high torque brushless motor. This is why the XTM engineering team brings to you an RTR buggy with an industrial grade brushless speed control with a hi-torque brushless motor that runs cooler and is reliable. XTM has the best buggy in its class at an affordable price! Heat and electronics simply do not get along. Many companies have speed controls that can't handle the loads, and other companies have motors that are simply failing. The XTM engineering team realized that and feel the XT2e is the first to hit the tracks with a proven system reliability. The XT2e has an industrial grade brushless speed control with a massive built-in cooling fan to keep the high temperatures under control while operating the Hi-Torque Brushless Motor, and comes with a program card for custom tuning of different driving styles and surface conditions. The XT2e Brushless Motor is custom wound making it purposely built to run this large 1.8 scale buggy, and it is supported by a massive cooling heat sink which is added to protect the motor from over heating failure. Such system compatibility has been proven to be the best by continuous aggressive testing before coming to market. FEATURES: * Industrial grade brushless speed control with a massive built-in cooling fan * Custom Wound Hi-Torque Brushless Motor with heat sink * Ready-to-run including the quality Airtronics 2.4GHz MX-Sport radio * Threaded aluminum oil-filled shock bodies with with heavy duty shock shafts * Aggressive tire design good for multiple surfaces * One terrific handling buggy loaded with features and more affordable than the competition * REQUIRES: o One or Two 6-cell 7.2V NiMh Batteries or One or Two 2-cell 7.4V LiPo Packs o Charger for Selected Battery o The one-pack setup requires two female 4mm gold connectors with shrink tubing (if not on battery). o The two-battery setup requires four female 4mm gold connectors with shring tubing (if not on batteries) and a jumper extension. o (8) "AA" Alkaline Batteries for Transmitter TECHNICAL SPECS: * Length: 482.6mm (19.0") * Width: 304.8mm * Height: 154mm (measured to the top of the body with settled suspension) * Weight: 3.63kg (8lbs) * Wheelbase: 323.9mm - 330.2mm (adjustable)

Servo, High-Torque Waterproof (blue case)

This is the replacement High Torque Waterproof Servo for several Traxxas R/C vehicles. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style connector.

Ball Bearings (5x11x4mm, blue rubber sealed)

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

Ball Bearings (5x10x4mm, blue rubber sealed)

This is a 2-pack of Traxxas 5x10x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

Ball Bearings (5x8x2.5mm, blue rubber sealed)

This is a 2-pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

Fuel Filler Bottle (500cc)

This is the Traxxas Top Fueler 500cc Glow Fuel Bottle.

Servo, High-Torque

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style connector.

Clutch Shoes & Spring (T-Maxx/Revo/Jato/Nitro 4-Tec)

These are Replacement Clutch Shoes for the T-Maxx and other specified Traxxas nitro R/C vehicles. These mount to the flywheel and engage the clutch.

Digital Temp Gauge On-Board

This is the Traxxas On-Board Temperature Gauge. Great for monitoring engine temperature during operation. FEATURES: Loop probe end which can be used on most any engine; Large LCD screen; On/Off button for longer battery life; Reads in Celsius and Fahrenheit; RECALL button for highest temperature; Clear splashguard for protection. INCLUDES: * One On-Board Temperature Gauge * One clear splashguard * One small piece of double-sided mounting tape * One instruction sheet * One small decal sheet SPECS: * Case Length: 46mm (1.8") * Case Width: 22mm (.86") * Case Height: 11mm (.45") * Probe Wire Lead Length: 229mm (9")

Cap-Head Machine Screws (3x32mm hex) (6)

This is a 6 pack of Traxxas 3X32mm Cap Head Screws.

Traxxas Wheel Nuts Splined 17mm (blue-anodized) (4)

These are the blue anodized 17mm Splined Wheel Nuts for the several of the larger-scale Traxxas R/C vehicles, such as the Brushless E-Revo & Summit. FEATURES: Aluminum construction, blue anodized in color. INCLUDES: Four aluminum splined wheel nuts.

Traxxas Wheel Hubs & Nuts Splined 17mm (blue-anodized)

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer. FEATURES: Aluminum construction, blue anodized in color. INCLUDES: Four aluminum splined wheel hubs and nuts.

Traxxas Toe Link (5.0mm steel)

This is a pair of stock replacement Toe Links (Length: 5.1"; 129mm) for the Traxxas Revo & Summit Trucks. These adjust the position of the toe on the vehicle. FEATURES: Steel turnbuckle design; 5.0mm diameter INCLUDES: Two front or rear toe links

Traxxas Suspension Pin Set (front or rear, steel)

This is the Steel Suspension Pin Set for the Traxxas Revo, Slayer, & Summit. They are also commonly known as Hinge Pins. FEATURES: Steel construction; Polished finish. INCLUDES: Two Long Suspension Pins; Four Short Suspension Pins. SPECS: * Long Suspension Pin Length: 85mm (3.35") * Short Suspension Pin Length: 24mm (0.95") * Pin Diameter: 3.3mm (0.13")

Traxxas Suspension Arms Adjustable Wheelbase (right/upper & lower arm)

This is the Upper and Lower Right Suspension Arm Set used in the Revo Adjustable Suspension Arm Set (TRA5341). FEATURES: Black nylon construction INCLUDES: One upper rear and one lower right rear suspension arm REQUIRES: Removing stock suspension arms adjusting camber and toe after installing Adjustable Suspension Arm Set. NOTE - These arms are only for use with the Adjustable Suspension Arm Set.

Traxxas Suspension Arms Adjustable Wheelbase (left/upper & lower arm)

This is the Upper and Lower left Suspension Arm Set used in the Revo Adjustable Suspension Arm Set (TRA5341). FEATURES: Black nylon construction INCLUDES: One upper rear and one lower left rear suspension arm REQUIRES: Removing stock suspension arms adjusting camber and toe after installing Adjustable Suspension Arm Set. NOTE - These arms are only for use with the Adjustable Suspension Arm Set.

Traxxas Suspension Arms (right, front/upper & lower)

This is the stock Upper & Lower RIGHT FRONT Suspension Arm Set for the REVO Series from Traxxas. FEATURES: Durable black nylon construction. INCLUDES: One upper RIGHT FRONT suspension arm; One lower RIGHT FRONT suspension arm. REQUIRES: Suspension pin set TRAC5321 to attach to bulkhead.

Traxxas Suspension Arms (left, front/upper & lower)

This is the stock Upper & Lower LEFT FRONT Suspension Arm Set for the REVO Series from Traxxas. FEATURES: Durable black nylon construction. INCLUDES: One upper LEFT FRONT suspension arm; One lower LEFT FRONT suspension arm. REQUIRES: Suspension pin set TRAC5321 to attach to bulkhead.

Traxxas Steering Servo Mounts

This is a package of Steering Servo Mounts for the Traxxas Revo & Slayer Trucks. These mounts attach the steering servos to the vehicle. Since the Revo uses two steering servos, the vehicle requires four steering servo mounts as found in this package. FEATURES: Black plastic construction. INCLUDES: Four steering servo mounts. REQUIRES: Nothing. These are direct replacement parts.

Traxxas Steel Rocker Arm Post (2)

These are the Steel Rocker Arm Posts for the REVO, Slayer & Summit from Traxxas. FEATURES: Black steel construction. INCLUDES: Two Rocker Arm Posts. SPECS: Length: 1.3" (32.8mm); Diameter: 0.20" (5mm) unthreaded portion 0.23" (5.9mm) threaded portion

Traxxas Small Rod Ends (steering linkage)

This is the Small Rod End Set for the Traxxas Revo. These are used on the steering linkage. FEATURES: Plastic construction; Black in color; Metal Pivot Balls. INCLUDES: Six Rod Ends; Six Pivot Balls. SPECS: Length: 18mm (.71"); Width at ball joint: 9.5mm (.38")

Traxxas Skid Plate Set (front & rear)

his is the Front and Rear Skid Plates Set for the Traxxas Revo series, Slayer, & Summit. FEATURES: Black plastic construction; Front skid plate is a two-piece design; Rear skid plate is a one-piece design. INCLUDES: * Front and read skid plates * (8) 3X10mm button head screws (Part #2577) * (1) 3X30mm button head screw (Part #2582) REQUIRES: Installation on the Traxxas vehicle.

Traxxas Shock Mounts (front & rear)

This is a package of Front and Rear Shock Mounts for the Traxxas Revo. FEATURES: Black plastic construction. INCLUDES: One front shock mount, One rear shock mount, Four chassis wire clips, Four 3x32mm caphead machine screws, Four 3x6mm buttonhead machine screws

Traxxas Rear Suspension Arms (left or right/upper & lower)

This is a pair of stock replacement Rear Suspension Arms for the Traxxas Revo. These arms attach to the rear bulkhead. Since these are symmetrical, they can be used on left or right side. FEATURES: Durable black nylon construction. INCLUDES: One upper rear suspension arm; One lower rear suspension arm. REQUIRES: Nothing. These are direct replacement parts.

Traxxas Rear Bumper & Mount (Revo)

This is the replacement Rear Bumper and Bumper Mount for the Traxxas Revo Monster Truck series. FEATURES: Nylon Construction; Silver Bumper and Black Mount INCLUDES: * One Silver Nylon Rear Bumper * One Black Nylon Rear Bumper Mount * Two 3mm x 25mm Cap Hex Head Machine Thread Screws * Two 4mm x 10mm Cap Hex Head Machine Thread Screws REQUIRES: Assembly onto Vehicle; 2mm Hex Wrench; 2.5mm Hex Wrench

Traxxas Pushrods (steel) for Revo & Summit

This is the pair of Steel Pushrods for the Traxxas Revo & Summit. These pushrods work with the long travel #TRA5356, or progressive rocker 1 #TRA5357, arm sets. FEATURES: Metal pushrod construction; Plastic rod ends with hollow ball ends. INCLUDES: (2) pushrods; (4) rod ends; (4) hollow ball ends SPECS: * Pushrod length end-to-end: 4-1/16" (102mm) * Pushrod length between threads: 3-1/4" (81mm) * Diameter of unthreaded section: 3/16" (5mm)

Traxxas Pushrods (steel, black) for Revo & Summit

These are the (optional) Black Steel Pushrods for the Rocker Arms for the REVO from Traxxas. These go between the Rocker Arms and the Lower Suspension Arms. FEATURES: Black steel construction. INCLUDES: Two Pushrods w/pre-installed rod ends and balls. For rod ends only use TRA5347. SPECS: * Length: 5.4" (137mm) end to end including rod ends * Diameter: 0.20" (5mm)

Traxxas Linkage Steering (Revo/Slayer/Summit)

This is the Steering Linkage for the Traxxas Revo, Slayer & Summit. FEATURES: Connects between servo horns and steering arms. INCLUDES: Two 3x50mm steel turnbuckles, four short rod ends and four hollow balls

Traxxas Large Rod Ends, Revo/Summit/Slayer (for rear toe link only) (4)

TraxxaThis is a set of Rod Ends for the Traxxas Revo, Slayer, or Summit. They are to be used on the Rear Toe-Link Rods only. Ring on the rod end shaft denotes for Rear Toe Links only. If Pivot Balls are needed, use TRA5355. FEATURES: Plastic construction; Black in color INCLUDES: Four Rear Toe-Link Rod Endss Large Rod Ends, Revo/Summit/Slayer (for rear toe link only) (4)

Traxxas Large Rod Ends with hollow balls (12)

This is the Large Rod End Set for the Traxxas Revo, Slayer and several other R/C vehicles. FEATURES: Plastic construction; Black in color; Metal Pivot Balls INCLUDES: 12 Rod Ends; 12 Pivot Balls

Traxxas Inserts for Tubes (threaded steel)

Traxxas Front Bumper & Mount (Revo)

This is the replacement Front Bumper and Bumper Mount for the Traxxas Revo Monster Truck series. FEATURES: Nylon Construction; Silver Bumper and Black Mount INCLUDES: * One Silver Nylon Front Bumper * One Black Nylon Front Bumper Mount * Two 3mm x 25mm Cap Hex Head Machine Thread Screws * Two 4mm x 10mm Cap Hex Head Machine Thread Screws REQUIRES: Assembly onto Vehicle; 2mm Hex Wrench; 2.5mm Hex Wrench

Traxxas Bulkhead - Rear

This is the Rear Bulkhead for the Traxxas Revo and other large-scale Traxxas vehicles. FEATURES: Black plastic construction; Rocker shafts preinstalled INCLUDES: * Rear bulkhead halves (Part #5329) * (2) Rocker shafts(Part #5354) * (4) 4X14mm Button head screws

Traxxas Bulkhead - Front

This is the Front Bulkhead for the Traxxas Revo and other large-scale Traxxas vehicles. FEATURES: Black plastic construction; Rocker shafts preinstalled INCLUDES: * Front bulkhead halves (Part #5330) * (2) Rocker shafts(Part #5354) * (4) 4X14mm Button head screws

Traxxas Axle Carriers, left & right

This is the set of Axle Carriers and Steering Blocks for the Traxxas Revo & other large-scale Traxxas vehicles. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel. FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas Revo. REQUIRES: Bolting to each suspension arm, installing two 12x18mm ball bearings, stub axles, and pillow balls.

Traxxas Aluminum Rocker Arm Post (4)

This is the Aluminum Rocker Arm Post Set for the Traxxas Revo series & Slayer. Provides a pivot point for the Suspension/Shock Rocker Arms. FEATURES: Aluminum construction; Gun Metal in color; Threaded on one end w/machined nut at center of post. INCLUDES: Four Rocker Arm Posts.

Traxxas Aluminum Exhaust Header (silver-anodized)

This is the Aluminum Exhaust Header for the Traxxas Revo & Slayer. FEATURES: Aluminum construction; Silver in color; Fluted on tuned pipe end for better silicone coupler connection; Heatsink engine mounting flange. INCLUDES: One Exhaust Header

Spur gear (40-tooth; 1.0 metric pitch)

This is a 40-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

Spur gear (38-tooth; 1.0 metric pitch)

This is a 38-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

Spur gear (36-tooth; 1.0 metric pitch)

This is a 36-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

Cap-Head Machine Screws (3x28mm hex) (6)

This is a 6 pack of Traxxas 3X28mm Cap Head Screws.

TRAXXAS SLAYER PRO NITRO 4WD SHORT COURSE TRUCK

Short-Course Action With Incredible Power & Speed!! Traxxas Slayer Pro 4X4: The Next Generation of Nitro Short-Course Performance! Now Includes TQ 2.4Ghz Radio System with Traxxas Link! Bigger. Faster. Louder. The new Slayer Pro 4X4 delivers the screaming sound and ballistic thrust that every nitro driver craves. Now with a 10% larger footprint, Slayer Pro 4X4s new longer wheelbase chassis and wide track stance deliver enhanced stability in rough conditions and radically improved high speed cornering for incredible side-by-side, fender-banging racing action. Extreme TRX 3.3 power punches hard and revs fast to rip past the competition. The amazing Revo-Spec linkage-based suspension and hard-anodized GTR shocks deliver seemingly bottomless suspension travel that simulates the handling and jumping ability of full-size Pro 4X4 trucks. Slayer Pro 4X4s new bodywork and officially licensed BFGoodrich or Kumho tires bring together scale looks and 50+mph performance for all-day fun, excitement, and competition. Its the nitro short-course truck that could only come from Traxxas, The Fastest Name In Radio Control. Extreme Power TRX 3.3 Racing Engine! For those who like their horsepower raw and screaming at the red line, Slayer Pro 4X4 delivers with the award-winning nitro fury of the TRX 3.3 Racing Engine. Slayer Pro 4X4 punches hard with massive torque off the line and a wide powerbandbury the throttle at anytime to send all four tires into a raging fury of roosting dirt. The TRX 3.3 Racing Engine features a precision composite slide carburetor, PowerTune cooling head, dyno-proven IPS crankshaft, multi-port rear exhaust, and the starting convenience of the exclusive Traxxas EZ-Start system. It's competition-proven power with convenience and reliability for all-day driving fun. The TRX 3.3 engine is an investment in performance for years to come, fully protected by the exclusive Traxxas Lifetime Engine Replacement Plan. 2.4GHz Convenience and Control! Slayer Pro 4X4 includes the Traxxas TQ 2.4GHz High Output radio system with Traxxas Link. This new system offers the unbeatable convenience of no channels, no crystals 2.4Ghz technology, and the long-range security of a high-output signalbut thats just the beginning. The new, patent-pending Traxxas Link technology stores settings for up to 20 Traxxas Link-enabled models, with no naming or model memory settings required. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQ 2.4GHz High Output radio is also fully adjustable; steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. Slayer Pro 4X4 is built on the long-wheelbase 3D semi-monocoque chassis originally developed for the Revo 3.3. Formed from 3mm 6061 aluminum, the chassis is blue-anodized and T6 hardened for strength. The integrated battery box accepts 4 AA cells or a 5-cell rechargeable receiver pack (sold separately). The ultra-compact throttle servo mount ties rigidly into the chassis and supports the air filter, and the low-profile receiver box protects our latest 5-channel 2.4GHz Traxxas Link-enabled micro receiver. A blue-anodized crimp nut locks the antenna tube in place, so it stays put no matter how rough the racing gets, and an integrated roll hoop/carrying handle protects the TRX 3.3 engine from rollover abuse. Suspension & Chassis Innovation From The Award-Winning Revo 3.3! Eight National Championship titles have proven the superior design of the Revo-Spec rocker-actuated suspension system that mirrors the huge travel and plush damping of the full-size Pro 4X4 short course race trucks. Full-time 4-Wheel-Drive delivers track-gripping traction for hard hitting acceleration through the turns and precise control that lets you thread the needle through the traffic. The geometry of the patent-pending suspension design multiplies the total wheel travel to soak up big hits that would sideline other trucks. The suspension action is light and supple over small bumps, but when bigger jolts compress the suspension farther, the progressive rocker geometry instantly increases spring and damping rates to absorb the impact. And it's fully adjustable; ride height, progressive rate, and damping can all be fine tuned independently. This no-compromise setup is simply not possible with conventional suspension designs. FEATURES: o NEW 30mm longer chassis from the 8-time National Champion Revo 3.3 o NEW Extended suspension arms increase width by 26mm o NEW Hard-anodized, teflon-coated GTR shocks with titanium-nitride shafts o NEW High-Torque, Waterproof steering and throttle servos o NEW Officially licensed BFGoodrich and Kumho tires o NEW Split-Spoke SCT wheels with chrome centers and colored beadlock trim o NEW Aggressive, authentic Pro 4X4 body design o NEW TQ 2.4GHz High Output radio system with Traxxas LINK o TRX 3.3 engine with EZ-Start electric starting o Polished Resonator dual-champer tuned pipe o Auto-shifting 2-speed transmision o Compact receiver box with integrated personal transponder mount o High-flow dual-stage air filter o Large capacity 150cc fuel tank o Heavy-duty drivetrain with rubber-sealed ball bearings o Ready-To-Race with ProGraphix factory-finished and decaled body * Requires: o Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel o 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) o Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: * Top Speed: 50+mph * Length: 23.54 Inches (598mm) * Front Track: 12.68 Inches (322mm) * Rear Track: 12.68 Inches (322mm) * Weight (no fuel): 7.78lbs (3.53kg) * Height (overall): 7.87 Inches (200mm) * Wheelbase: 13.9 Inches (353mm) * Front Shock Length: GTR Aluminum 3.23" (82mm) * Rear Shock Length: GTR Aluminum 3.23" (82mm) * Front Tires: BFGoodrich or Kumho 2.2" (Pre-Glued with Inserts) * Rear Tires: BFGoodrich or Kumho 2.2" (Pre-Glued with Inserts) * Wheel Diameter: 2.2 Inches (56mm) Outer; 3.0 Inches (76mm) Inner * Suspension: Fully independent Progressive 2 Rockers * Front Wheels: 2.2" Split-Spoke, Chrome with Black or Red Beadlock * Rear Wheels: 2.2" Split-Spoke, Chrome with Black or Red Beadlock * Gear Ratio (1st Gear): 15.75:1 * Gear Ratio (2nd Gear): 10.05:1 * Transmission: Auto Two-Speed Forward Only * Differential Type: Bevel Gear, Sealed, Limited Slip * Drive System: Shaft-Driven 4WD * Chassis Type: 3mm, 6061-T6 Blue-Anodized Aluminum * Radio System: TQ 2.4GHz with Traxxas Link (2-Channel) * Engine (fuel-powered): TRX 3.3 Racing Engine with EZ-Start * Brake Type: Steel Disc with semi-metallic pads * Fuel Tank Capacity: 150cc * Top Speed: 50+mph * Skill Level: 4 ACCESSORIES & EXTRAS: * Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel * Alkaline Batteries for Transmitter & Receiver (12 needed) * Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge

Redcat Rampage MT PRO (Version 3) 1/5 Scale Gas Truck

Now with 2.4Ghz Radio & 30cc HY Engine For the RC enthusiast that just has to have the best, the Big Daddy of all Rampages is just for youThe Rampage MT PRO boasts every available aluminum hop-up option along with a powerful 30cc HY engine, aluminum body oil filled shocks, generous 700 cc fuel tank capacity, oversized air filtration, pro tuned pipe, dual steering servos and much much more. Boldly customize your paintable, clear-bodied Rampage MT PRO any way you like and well include a full set of Redcat Rampage decals to add punch to your monster machine. Specifications: Motor Type Gas 30cc HY 2 Stroke Transmission Single Speed Drive System 4 Wheel Drive Length 740mm Width 600mm Height 350mm Wheelbase 516mm F/R Ground Clearance 72mm Fuel Tank Capacity 700cc Chassis Type 4mm Aluminum 6061T6 Brake Type Dual Disc Shocks Aluminum Body Pro Shocks Speed Control Battery Battery & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

Redcat Racing Vortex EPX PRO

Get ready for some off road action with the Vortex EPX PRO. With a brushless motor and speed controller, this 1/10 scale desert truck is easy to operate and runs at blazing speeds similar to nitro vehicles. No messy fuel to buy, just plug in a battery and go! Specifications: Motor Type Electric Brushless 3300KV 540 Novatech Transmission Forward & Reverse Drive System 4 Wheel Drive Length 460mm Width 250mm Height 160mm Wheelbase 275mm Ground Clearance 26mm Fuel Tank Capacity Chassis Type Plastic Brake Type Shocks Aluminum Body Oil Filled Speed Control Brushless ESC (2s LIPO Ready) Battery 7.2v 2000Mah NiMh Battery Pack Radio System 2 Channel AM

VENOM KING OF SHAVES GAS RACING BOAT

The Venom King of Shaves Gas Boat is part of Venom's new line of R/C gas race boats. The Venom King of Shaves Class 1 Racing Ready-to-Run Gas Boat is officially licensed by King of Shaves and accurately replicates the 2006-2007 King of Shaves Class 1 Powerboat. At almost 5 feet long (Length - 58in/1470mm Beam - 15in/380mm), the Venom King of Shaves Class 1 Racing RTR Gas Boat features a 2+ HP Water-Cooled 26cc Marine Engine that will rocket your boat to 35+ MPH/ 56+ KPH right out of the box! With the included 3-Channel Programmable FM Radio with High Torque Servos, Machined Aluminum Running Gear with Adjustable Drive Line, Hand-Laid Fiberglass Hull, Pre-Balanced Aluminum Propeller, a Sealed Acrylic Radio Box and a Laser Engraved padded wooden display stand, you'll have a top of the line Ready-to-Run Gas Boat at an amazing price! Venom's new line of gas boats offer some serious technology and the ultimate in radio control enjoyment. Boats are loads of fun and perfect for year-round radio control enjoyment. Get your remote control boats, accessories, and parts now at Full Throttle Hobbies - your Venom R/C Boat Superstore! FEATURES: READY TO RUN! ALMOST 5 FEET LONG! 35+Mph / 56+ Kph OUT OF THE BOX 2+ HP WATER-COOLED 26cc MARINE ENGINE 3-CHANNEL PROGRAMMABLE FM RADIO WITH HIGH TORQUE SERVOS (Venom Gas Boats come with the VR3T, a 3-Channel Computerized FM Radio featuring 3rd Channel Mixing and 15 Model Memory. The radio also has Programmable Steering Dual Rate with a thumb switch so you can adjust the steering sensitivity on-the-fly. The VR3T has so many high-end features you'll forget you're using an RTR kit radio!) MACHINED ALUMINUM RUNNER GEAR WITH ADJUSTABLE DRIVE LINE HAND-LAID FIBERGLASS HULL PRE-BALANCED ALUMINUM PROPELLER SEALED ACRYLIC RADIO BOX LASER ENGRAVED PADDED WOODEN DISPLAY STAND TECHNICAL SPECS: Racing Classification: Class 1 Length: 53.5"/1360mm Overall Length: 58"/1470mm Beam: 15"/380mm Height: 9"/230mm Overall Height: 13"/330mm Weight: 16lbs Fuel Capacity: 24oz Run Time: 30 minutes Sound Level: 84db Engine: Venom 26cc Marine Pull Start Gas Engine Displacement: 25.4cc Bore: 1.338"/34mm Stroke: 1.102"/28mm Max HP: 2.02@10,000 RPM Idle RPM: 3500 +/- 150 Fuel Type: 87 Octane w/Premix 2-Stroke Oil Carburetion: Walbro WT-644 w/Primer Pump & Choke Net Weight: 3.5lbs/1.6kg REQUIRES: "AA" Batteries: 12 (8 for transmitter, 4 for receiver box) Gasoline: 87 octane High Performance 2-Stroke Engine Oil ACCESSORIES & EXTRAS: "AA" Alkaline Batteries (12 needed)

VENOM KING OF SHAVES C1 ELECTRIC BOAT

Venoms new electric King of Shaves, Class 1, 34 inch scale racing catamaran, officially licensed by King of Shaves and accurately replicates the 2006-2007 King of Shaves Class 1 Powerboat. The Venom electric C1 racing boat King of Shaves has many high performance features, including a scale fiberglass composite catamaran hull combined with twin Venom 60A Pro Marine brushless speed controls and dual Venom V380 Marine motors turning 2880KV each. This powerful combination turns twin glass filled nylon counter rotating propellers through CNC machined fully adjustable Arneson style drives to rocket the King to speeds in excess of 40mph! Venom's new line of boats offer some serious technology and the ultimate in radio control enjoyment. Get all your remote control boats, accessories, and parts now at Full Throttle Hobbies - your Venom R/C Boat Superstore! FEATURES: Fiberglass Composite Hull with scale King of Shaves graphics Secured top hatch with pin and Neodymium magnets Two water cooled Venom 60A Pro Marine Brushless Speed Controls Two water cooled Venom V380 2880KV Brushless Motors with 4mm shafts Two Arneson style CNC machined aluminum fully adjustable drives with ball bearings CNC machined aluminum motor mounts Aluminum ESC and servo mounts Composite nylon counter rotating propellers Laser cut and sealed plywood battery tray with integrated receiver mount VR3T Digital FM transmitter and receiver Laser cut and sealed plywood boat stand TECHNICAL SPECS: Racing Classification: Class 1 Age Rating: 14+ With Adult Supervision Length: 34" (86.4cm) Beam: 9.5" (24cm) Height: 4.5" (11.4cm) Overall Height: 6.5" (16.5cm) Weight: 4.5 lb (2.04 kg) Chassis: Hand-Laid Fiberglass Motors: Brushless, Electric Direct Drive Radio: Venom VR3T 3-Ch FM Radio Transmitter Servo: (1) Metal Gear High Torque (VEN-1825) REQUIRES: "AA" Batteries: (8 for transmitter) (2) 6-8 Cell NiMh or 11.1V 3-Cell LiPo Batteries ACCESSORIES & EXTRAS: "AA" Alkaline Batteries (8 needed) (2) 7.2v 6 cell 3000mah NiMH Flat Pack (2) 8.4v 7 cell 3000mah NiMH Hump Pack (2) 9.6v 8 cell 3000mah NiMH Hump Pack (2) 20C 4000mah 11.1v LiPO (2) 20C 5400mah 11.1v LiPO

VENOM 25C 5000mAh 18.5V 5S LiPo Battery

Venoms latest releases in our Li-Power line-up of Lithium Polymer battery packs. When youre looking for true power and performance look no further than our Li-Power LiPO batteries to power many applications. All our packs feature a JST HX 2.5 balance plug and silicone covered main power wires. Push it to the limit with Venom Li-Power Series LiPO packs! FEATURES: * Battery Type: Lithium Polymer (LiPO) * Configuration: 5s1p * Weight: 23.5 oz. * Dimensions: 45.5 x 42.8 x 153mm * Charge Rate: 1C (5A) * Continuous Discharge: 25C (125A) * Min Discharge Volts Per Pack: 15V * Max Burst Rate: 35C (175A) * Max Volts Per Cell: 4.2V * Max Volts Per Pack: 21V

VENOM 25C 3600mAh 22.2V 6S LiPo Battery

Venoms latest releases in our Li-Power line-up of Lithium Polymer battery packs. When youre looking for true power and performance look no further than our Li-Power LiPO batteries to power many applications. All our packs feature a JST HX 2.5 balance plug and silicone covered main power wires. Push it to the limit with Venom Li-Power Series LiPO packs! FEATURES: * Battery Type: Lithium Polymer (LiPO) * Configuration: 6s1p * Weight: 20.1 oz. * Dimensions: 46.5 x 42 x 134.2mm * Charge Rate: 1C (3.6A) * Continuous Discharge: 25C (90A) * Min Discharge Volts Per Pack: 18V * Max Burst Rate: 35C (126A) * Max Volts Per Cell: 4.2V * Max Volts Per Pack: 25.2V

VENOM KING OF SHAVES P1 35" BRUSHLESS BOAT

Venom's new electric King of Shaves P1 35 inch scale racing boat is officially licensed by King of Shaves and accurately replicates the 2007-2008 King of Shaves Championship winning P1 Powerboat. The Venom electric KOS P1 racing boat has many high performance features, including a scale stepped fiberglass composite Deep Vee hull combined with a Venom 60A Pro Marine Brushless Speed Control and Venom V500 Marine Brushless motor. This powerful combination turns a glass filled nylon prop through a CNC machined aluminum adjustable drive to rocket the King of Shaves P1 across the water. Boats are loads of fun and perfect for year-round radio control enjoyment. Get your remote control boats, accessories, and parts now at Full Throttle Hobbies FEATURES: Fiberglass Composite Hull with scale "King of Shaves" graphics Secured top hatch with pin and Neodymium magnets CNC machined aluminum adjustable drive with ball bearings and Drive Angle Markings CNC machined aluminum motor and servo mounts Composite nylon propellers Laser cut and sealed plywood battery tray with integrated receiver mount Laser cut and sealed plywood boat stand TECHNICAL SPECS: Age Rating: 14+ With Adult Supervision Prop: 40 x 1.75 x 3 Blade Composite Propeller Motor: V500 Marine Brushless Motor Radio: Venom VR3T 3-Ch FM Radio Transmitter - Programmable w/ 15 model Memory ESC: Venom Pro Brushless Marine 60AMP ESC (Stock ESC can handle up to 6S LiPO Packs) Length: 31.25" (79.4cm) Beam: 7.25" (18.4cm) Overall Height: 4.6" (11.7cm) Weight: 3.4 lb (1.54 kg) Servo: (1) Metal Gear High Torque (VEN-1825) REQUIRES: "AA" Batteries: (8 for transmitter) VENOM 3S 11.1V 5400mah LiPO (VEN-1581) Recommended Appropriate charger for battery ACCESSORIES & EXTRAS (select at right): "AA" Alkaline Batteries (8 needed) VENOM 3S 11.1V 5400mah LiPO (VEN-1581)

HPI BAJA 5B SS 1/5 GAS BUGGY KIT

The 1/5th scale HPI Baja 5B SS RWD desert racing buggy has been a huge success with RC fans, racers and journalists, and Baja owners have been extremely happy with the racing prowess, durability and qualities of the Baja 5B buggy. Now, HPI is proud to announce the Baja SS, a full-option Baja kit that you assemble yourself, loaded with tons of hop-ups that enhance the speed and power of the Baja 5B buggy, improve its durability even further, and provide totally sweet custom looks! The Baja SS follows the HPI innovation of upgraded 'Super Sport' models that feature kit versions of popular HPI RTR models, with additional option parts added to enhance the enjoyment of your kit. A long list of option parts is included with the SS version of the Baja 5B. As you build the kit, you add in the options that come in the box, and add your own radio gear (receiver, throttle servo, and receiver battery). At the heart of the Baja SS is the #15403 Fuelie 26S 26cc engine, a tougher, stronger and more powerful engine than the standard 23cc Fuelie engine in the Baja 5B RTR buggy. With more displacement you get increased low-end grunt, more acceleration and huge top-end speed! The Fuelie 26S is a 2-stroke engine powered by regular pump petrol that is mixed with 2-stroke engine oil, so the running cost of the engine is extremely low when compared to any normal nitro powered glow engine. You'll spend just pennies per tank on fuel! To handle the extra horsepower of the Fuelie 26S, the drivetrain of the Baja SS is boosted with specially designed option parts that can handle the power increase. Providing a boost of extra power is the #86690 Aluminum Tuned Pipe, which is designed just for the 26cc engine and gives even more acceleration power to the Baja SS. The #15448 8000 RPM Clutch lets the engine rev up to a high RPM before engaging the drivetrain, giving you lightning-fast acceleration off the starting line and out of every corner. Protecting the differential is the #87568 Aluminum Alloy Diff Case, giving protection from the extreme strength of the engine. Finally, the #86610 Heavy Duty Rear Dogbones get the power from the diff to the rear wheels with chunky steel driveshafts and jointed rubber boots for minimal loss of power. Baja 5B SS Specs To improve the handling of the Baja even further, a full set of new #87561 and #87562 VVC/HD Baja shocks are included that improve handling on all types of terrain and are also heavy-duty to keep things secure on the track. A complete set of #86618 sway bars are included to keep your Baja SS planted in the curves and aid traction. To get more rear suspension travel at the rear, our designers have modified the rear shock tower brace - this gives you better rear traction and increased braking for lower lap times! The Baja SS carries over the robust, efficient and highly detailed double-wishbone suspension from the standard Baja 5B, giving you amazing control and precision over any type of terrain. The suspension doesn't just look like the real deal, it's built to last! The rugged upper and lower arms will soak up the bumps and rough landings of fast off-road driving and racing, plus it's super-strong to hold up in those inevitable crashes and rollovers! The front and rear suspension hubs are also extremely durable and made from tough nylon composite material, so it will go the distance and absorb any bumps from crashes. Thick steel turnbuckles connected with strong composites provide a full range of movement while providing protection, plus they allow you a good range of adjustments so you can fine-tune your settings to get past the pack on the racetrack! In addition to all the heavy duty options included with the kit, you get a tough, super-strong steering servo that is already equipped with the #80584 Metal Gear Steering upgrade. This allows you to have the security of reliable, quick steering in all conditions. With a powerful servo controlling the steering, the Baja SS will track straight and true when you want it to, no matter how bumpy the running surface it. The front wheels will also stay pointed in the right direction as you power through the turns! This is a great standard feature of the Baja SS, putting you well on your way to a solid electronics package. To protect the tire sidewalls the kit also includes #3272 Heavy Duty Bead Locks in the Baja silver. The Heavy Duty Bead Locks feature a wide rim that extend further over the sidewall of the rear tires to protect the tires in all conditions, and especially as the Baja slides through corners and across rough ground. They are a great way to extend the life of the tires, and are available in a variety of colors to enable you to match any custom color scheme! Finally, we can't let the awesome good looks of the Baja SS go unannounced. Not only do you get the option #87477 Gunmetal Anodized Main Chassis, you get a full range of bright orange anodized aluminum 6061 T6 that are specific to the Baja SS. To top everything off, you get a clear bodyshell set that is totally ready for your custom paint scheme! Go for a cool subdued 'urban camo' paint job, a nice flame color scheme or throw your own custom racing paint scheme on the Baja SS to show off just a bit! PRE-INCLUDED HOP-UPS * #15403 Fuelie 26S 26cc Engine * #15448 8000 RPM Clutch * #86690 Aluminum Tuned Pipe * #80584 Metal Gear Steering * #3272 Heavy Duty Beadlocks * #86618 Front & Rear Sway Bars * #87551 New Rear Shock Tower Brace * #87561 & #87562 VVC/HD Pro Shock Set * #86610 Heavy Duty Rear Dogbones * #87568 Aluminum Alloy Diff Case * #7560 & #7562 Clear Pre-Cut Bodyshell * #87477 Gunmetal Main Chassis * Orange Anodized SS Parts REQUIRES: * 2-3 Channel Radio & Receiver * Standard Servo for Throttle * Receiver Battery * Battery Charger * Paint for Polycarbonate Body * Unleaded Gasoline: 87-93 octane (mix gasoline and oil at 25:1 ratio) * Transmitter Batteries: 8 AA TECHNICAL SPECS: * Length: 817mm * Width (front): 460mm * Width (rear): 480mm * Height: 255mm * Track (front): 395mm * Track (rear): 400mm * Wheelbase: 570mm * Weight: 9.6kg (without fuel) * Camber: adjustable front & rear * Caster: adjustable front * Toe-In: adjustable front & rear * Drive System: 2WD viscous diff * Tires (front & rear): HPI Dirt Busters Click picture to enlarge

Redcat Rampage DUNERUNNER V3 1/5 Scale Gas Buggy

Redcat DSM-2C 2.4GHz Radio & Receiver Included! Got Gas?? Be the biggest and baddest on the block with the raging monster buggy called the Redcat Rampage Dunerunner V3. This high powered beast runs on mixture of unleaded gasoline and 2-stroke oil, and packs an enormous adrenaline-filled punch with a powerful 26cc HY gasoline engine, beefy yet lightweight aluminum alloy chassis, aluminum body oil filled shocks, generous 700 cc fuel tank capacity, oversized air filtration and 4 wheel adjustable camber/toe-in suspension. Reining in this powerful buggy is assisted by two aggressive dual disc brakes, all set on huge block tread soft compound RC off road meats. The Dunerunner V3 poses a formidable threat both on and off the track, and is sure to impress the most hard-core 4x4 RC buggy enthusiast. Specifications: Motor Type Gas 26cc HY 2 Stroke Transmission Single Speed Drive System 4 Wheel Drive Length 825mm Width 480mm Height 270mm Wheelbase 610mm Ground Clearance 55mm Fuel Tank Capacity 700cc Chassis Type 4mm Aluminum 6061T6 Brake Type Dual Disc Shocks Aluminum Body Oil Filled Shocks Speed Control Battery Battery & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

Redcat Rampage (Version 3) MT 1/5 Scale Gas Truck

Now with 2.4Ghz Radio & 26cc Engine Got Gas?? Be the biggest and baddest on the block with the raging monster called the Redcat Rampage MT V3. This high powered beast runs on mixture of unleaded gasoline and 2-stroke oil, and packs an enormous adrenaline-filled punch with a powerful 26cc HY gasoline engine, beefy yet lightweight aluminum alloy chassis, aluminum body oil filled shocks, generous 700 cc fuel tank capacity, oversized air filtration and 4 wheel adjustable camber/toe-in suspension. Reining in this big beast is assisted by two aggressive fiberglass brake pads, 3 steel disc brakes and 7 bead locked wheels, all set on huge block tread soft compound RC off road meats. The Rampage MT poses a formidable threat both on and off the track, and is sure to impress the most hard core 4x4 RC truck enthusiast. Stand out from the crowd with a wide selection of power packed hop-ups available now! Specifications: Motor Type Gas 26cc HY 2 Stroke Transmission Single Speed Drive System 4 Wheel Drive Length 740mm Width 600mm Height 350mm Wheelbase 516mm F/R Ground Clearance 72mm Fuel Tank Capacity 700cc Chassis Type 4mm Aluminum 6061T6 Brake Type Dual Disc Shocks Aluminum Body Oil Filled Shocks Speed Control Battery Battery & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

Rampage TT V3 1/5 Scale Gas Buggy

Now with 2.4Ghz Radio & 26cc Engine Got Gas?? Be the biggest and baddest on the block with the raging monster buggy called the Redcat Rampage TT. This high powered beast runs on mixture of unleaded gasoline and 2-stroke oil, and packs an enormous adrenaline-filled punch with a powerful 26cc HY gasoline engine, beefy yet lightweight aluminum alloy chassis, aluminum body oil filled shocks, generous 700 cc fuel tank capacity, oversized air filtration and 4 wheel adjustable camber/toe-in suspension. Reining in this powerful buggy is assisted by two aggressive fiberglass brake pads, 3 steel disc brakes and bead locked wheels, all set on huge block tread soft compound RC off road meats. The Rampage TT V3 poses a formidable threat both on and off the track, and is sure to impress the most hard-core 4x4 RC buggy enthusiast. Specifications: Motor Type Gas 26cc HY 2 Stroke Transmission Single Speed Drive System 4 Wheel Drive Length 720mm Width 420mm Height 285mm Wheelbase 516mm F/R Ground Clearance 55mm Fuel Tank Capacity 700cc Chassis Type 4mm Aluminum 6061T6 Brake Type Dual Disc Shocks Aluminum Body Oil Filled Shocks Speed Control Battery Battery & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

HPI BAJA 5B 2.0 RTR 1/5 GAS BUGGY w/2.4Ghz Radio

When the designers at HPI released the original Baja buggy to the public, we didn't realize the absolute storm of popularity it would enjoy. Racers everywhere loved it, reviews from all over the world absolutely glowed with enthusiasm, shops ran out of stock and brand new companies sprung up to make wild hop-ups for this one-of-a-kind machine. We had just as much fun tracking all the praise as we did for the Savage monster truck! Most encouraging of all, though, we heard back from customers everywhere about how much they enjoy their Baja, which is the best thing we could possibly expect. After all that, you'll understand that when it comes to updating such a legendary car, you can't mess with the magic too much: we wanted to give our fans more of the same, without going overboard. It was a tricky subject, but we're sure we got it right on the money. The HPI Baja: the original, and still the best! The latest version of the Baja 5B 2.0 gives you a 2.4GHz radio system, more speed, better acceleration, improved handling and THREE fantastic new looks! The awesome gray-anodized look of the Baja 5T truck comes to the buggy, with all of the main aluminum parts now anodized a cool, sleek gunmetal color. The body is now available in three fantastic new designs: bright red, cool blue and subdued gray. Baja 5B 2.0 Specs New Standard Parts The Baja 5B 2.0 has several great new features and standard parts, many of them taken right off the kit-only SS version and the Baja 5T truck! Check out all the fantastic updates! New Body Colors The tough bodyshell is now available in three all-new paint schemes: subdued gray, hot red and cool blue! These are pre-painted, pre-trimmed bodies that are ready to go right out of the box: no prep work needed! With their 2mm thick polycarbonate moulded construction they will last for a very long time! Revised 23cc Engine The new engine fitted in the Baja 5B 2.0 features an updated cylinder that provides 10% extra power! When combined with the High Flow Muffler and 8000 RPM clutch, you'll experience much faster top speeds, better acceleration and more power overall! High Flow Muffler The High Flow Muffler from the Baja 5T is a much larger capacity design than the old standard muffler, and is tuned to give you more horsepower on the track. It sounds fantastic, too! When the Baja 5B 2.0 is ripping past the pits, you will know it! 8000 RPM Clutch Formerly an option part, the high performance 8000 RPM Clutch from the Baja SS and 5T is used to give you more punch off the line. Lightweight clutch shoes and a strong heavy-duty spring are the integral parts of this unit, and you will feel the power out of the turns. VVC/HD Shock Absorbers These are the same damper units that equip the Baja SS and Baja 5T, and are now standard parts for the 5B 2.0 - these are oil-filled, externally adjustable coilover shocks for fantastic performance and heavy-duty action! Thick shock shafts provide security from crashes, threaded shock bodies allow instant ride height changes, and the externally adjustable design is tailor-made for trackside tuning. Torx T27 Engine Screws The engine now features tough Torx T27 screws to make maintenance and rebuilds less of a chore. Torx screws are easier to work with and provide less wear and tear on tools and screws, making them the ideal screw option for a Baja buggy engine! Gunmetal Anodizing The v2.0 update includes a total reworking of all the aluminum parts of the Baja buggy, from the chassis to the spring adjust collars! The very cool gunmetal look gives the Baja 5B 2.0 the 'race' look, and it's easy to add a bit of bling with Baja SS or original 5B colour parts. Great New Look Topping off the gunmetal monocoque chassis are the new pre-painted bodyshells provided with the Baja 5B 2.0 - choose from three new main colours: a racy red, awesome blue or stealthy gray! Each design is totally new and unique, and would cost you a fortune if you were to get it custom-painted on a clear bodyshell! Hit the track or your bashing field in style! Fantastic Baja Features The Baja 5B 2.0 keeps the standard features that made the original Baja 5B such a stand-out large-scale buggy, and which continue to single it out from all the rest of the large-scale buggies - as well as all of the copies! The HPI Baja is the ONLY large-scale buggy line-up that has all of these great features! Fantastic Scale Appearance From the first glance, the Baja buggy looks just like the sand rails and desert racers you can see racing across the Sonora in Baja California, or blasting around the sands dunes of the American Southwest. Nothing else in the RC world comes close! From the bumper and front suspension, to the cockpit and rollcage, all the way to the wing and rear bumper, in the looks department, the HPI Baja is second to none. Extremely Durable HPI has always been known for its extremely rugged cars and trucks, starting with our earliest touring cars and carrying on with monster trucks and large-scale machines. The Baja 5B 2.0 uses the same suspension components as the Baja SS and 5T, so you know you've got a quality buggy in your hands. While the ones that came after the original Baja use cheap plastics and questionable methods to make their kits, the original is still going strong with original designs and compounds to keep you going, no matter what you put your Baja through! Monocoque Chassis Still a unique item among the large-scale racing crowd, the Baja 5B 2.0 continues to use the unique Baja monocoque aluminum chassis. The chassis formed from strong 6061 aircraft aluminum for light weight and strength, then bent into shape with computer precision to make it into an extra-rigid and super-strong platform for the engine, suspension and all other components of the Baja. Long Travel Suspension For confidence-inspiring traction and control on any type of surface, the Baja 5B 2.0 uses the amazing long-travel suspension used for all the kits in the Baja series. Extra-long oil-filled shock absorbers and durable suspension arms connect via a specially tuned suspension geometry to give not only a fantastic look and style to the Baja buggy, but amazing versatility, tuning potential and great handling! Viscous Torque Differential The totally unique Viscous Torque Diff in the Baja series delivers power smoothly to the rear wheels. It's set up out of the box perfect for most purposes already, but the diff can be tuned with different diff greases to suit any driving style or track. Hardened metal is used throughout the diff for reliable performance in all conditions. Heavy Duty Rear Dogbones Metal construction for extra durability with high horsepower engines like the Fuelie 26S. Features rubber boots at both ends to keep dirt and rocks out of the joints. Dual Vented Disc Brake To bring something the size and speed of the Baja buggy to a safe and controlled stop, the brakes need to be extra-strong, reliable and foolproof. This is why we use two steel plates for brake discs, both of which are drilled for lightness. To keep the discs cool under pressure, a fan-shaped spacer is used blast rotating air through the vent holes drilled in each disc. Long Wheelbase In addition to everything else that makes the Baja 5B 2.0 handle great, its long wheelbase is ideal for racing on large tracks designed for 1/5th scale vehicles, or just playing in big fields. The Baja 5B 2.0 is more stable over jumps and rough ground than other large-scale cars, a tribute to its great suspension design and longer wheelbase. 2.4GHz Radio System with Failsafe The electronics included in every Baja RTR buggy and truck have to be suitable to the task of handling a car nearly a meter long that can go over 35 MPH - that includes a handy built-in electronic failsafe to prevent a runaway Baja! For this latest version of the Baja 5B 2.0, we've upgraded to a new 2.4GHz radio system that makes running your Baja safer and more enjoyable than ever. No need to worry about radio conflicts, crystals, or radio interference, this Baja is equipped with the latest Spread Spectrum radio technology that delivers worry-free driving. The heavy-duty steering servo now includes tough metal gears and an aluminum steering arm for extra durability. A powerful sub-C type 6-volt receiver pack powers the servos for confidence and longevity. You'll find that many Baja bashers don't find a need to upgrade the radio system, as it's already perfect for the task! * Spread Spectrum DSSS - no frequency worries when running with dozens of cars at the same time * 2.4GHz - high frequency operation eliminates radio interference * Easy operation - simplified feature list avoids the complexity of computerized radios * Ergonomic design - comfortable pistol grip handle and foam steering wheel * No crystals needed - saves money and improves reliability * Built-in failsafe function - protects the car from low voltage runaways * Steering dual rate - easily fine tune the steering to track conditions * Servo reversing switches - quickly reverse the servos for multiple applications * Low battery warning - a flashing LED indicates when the transmitter batteries are running low Electronic Failsafe Nitro racers have known for a long time that having a working failsafe system is important for those 'just in case' moments - some unforeseen event that could make their car go out of control. With a buggy as big as the Baja (over 800mm long and 9.5kg in weight!), this is even more important! The Baja 5B 2.0 uses the same reliable electronic failsafe as all other Baja RTR kits. The adjustable failsafe setting ensures that should your Baja 5B 2.0 lose radio signal, instead of flying out of control it will come to a safe and controlled stop! There's nothing like peace of mind! All-Terrain tires & Beadlock Wheels To allow the Baja buggies to go anywhere, we fit tires that are ideally suited for off-road conditions. Spiked rear tires and dash-style front tires provide the perfect amount of traction and control on nearly all dirt, gravel and grass surfaces. The Dirt Buster S Compound rear tires use a versatile square pin design that sheds mud and gets you the grip you need for massive top speed runs, while the Dirt Buster rib tires provide the direction and steering necessary for pinpoint accuracy on the track. Sealed Radio Box We know that most off-roaders love to blast through dirt, mud, water and more, so we protect the electronics of the Baja as much as possible with a sealed radio box. In addition to being under the bodyshell to protect from splashes, the radio box uses rubber plugs to provide access to the receiver battery and radio crystal, so you don't need to unscrew anything to get to these often-accessed items. If you do need to remove it, it's a simple matter of a few clips to take it out - no tools necessary! High Capacity Fuel Tank with Clunk The fuel tank from the Baja 5B and 5T is unchanged - why update something that is already perfect? The 700cc fuel tank takes pre-mixed 2-stroke fuel for run times of 45 minutes or more (if you're going slow, but who does that?), and the handy 'clunk' inside allows you to get upside down and not worry about the engine cutting out. So when you're mixing it up in traffic on the race track you won't have to worry about getting flipped upside down! Adjustable Rear Wing For most Baja buggy owners, the rear wing is something that is never touched until the car needs to be picked up or flipped over. Racers, though, are a different matter: racers like to tune things and play around with settings to get a little extra edge. So for the racers, we made the rear wing of the Baja adjustable so you can get a bit of extra downforce on small tracks, or lower the wing a bit for more speed on big tracks. Will you feel the difference? Only you'll be able to tell! Hard Plastic Skid Plates With tough nylon plastic skid plates front and rear, the chassis of the Baja 5B 2.0 is protected from the inevitable hard landings, crashes and more that you're sure to encounter while you're running your Baja buggy. The skid plates are easily replaced, and are a much cheaper alternative than replacing the aluminum chassis or motor plate, so you won't be afraid to pull off those crazy jumps with your Baja! Complete Set of Ball Bearings Finally, full set of high-quality ball bearings are used throughout the drivetrain for increased efficiency and long runtimes. Throughout the transmission and drivetrain, plus the front wheel hubs, ball bearings help keep maintenance to a minimum so you can just get out and run your Baja! RTR - PERFORMANCE STRAIGHT FROM THE BOX HPI makes it so easy for beginners to get into 1/5 scale! Just open the box, charge up the battery, add pre-mixed fuel and go! The Baja 5B 2.0 is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - engine connections, shocks and more are perfect before you even open the kit so you don't have to do a thing to get going fast! HPI Ready-To-Run models bring you the same high performance and quality that you'd expect from a high end model car kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC car straight from the box! HPI RTR cars are 98% factory assembled - they come Ready-To-Run and equipped with all the radio gear required. Just a few steps are needed to get your car up and running, such as adding the batteries to the transmitter and receiver and if you have a nitro powered car, running in the engine - which is now even easier with our comprehensive manual and HPI RC cars DVD which are both included in every box. Full Assembly Instructions and HPI RC Cars DVD As with all HPI cars and trucks, you get a full, in depth instruction manual with step by step instructions that allow you to easily disassemble and reassemble your buggy for maintenance and easy servicing. The information on the HPI RC Cars DVD provides a complete and detailed introduction to the fascinating world of HPI RC model cars and trucks. This DVD will show you step by step how to start and run in an engine, plus how to get the best performance from your HPI RC car. The HPI RC Car DVD is your personal RC car expert in a box! REQUIRES: * Unleaded Gasoline: 87-93 octane (mix gasoline and oil at 25:1 ratio) * Transmitter Batteries: 8 AA TECHNICAL SPECS: * Length: 817mm * Width (front): 460mm * Width (rear): 480mm * Height: 255mm * Track (front): 395mm * Track (rear): 400mm * Wheelbase: 570mm * Weight: 9.6kg (without fuel) * Camber: adjustable front & rear * Caster: adjustable front * Toe-In: adjustable front & rear * Drive System: 2WD viscous diff * Tires (front & rear): HPI Dirt Busters

HPI BAJA 5T 1/5 RTR GAS TRUCK w/2.4Ghz Radio

Now Includes 2.4Ghz Spread Spectrum Radio System! The HPI Baja 5T was inspired by the latest generation of desert trucks that compete in the world famous Baja 1000 race in Mexico. The body was built for a perfect fit on the Baja 5T chassis, with sculpted fenders, scoops, louvers, and an integrated roll cage for authentic desert-tough looks. In true HPI RTR form, the body is completely ready to go right out the box... painted in your choice of black or white, mounted, pre-applied racing decals and tinted windows. Factor in the front skid plate bumper, Desert Buster tires mounted on Outlaw truck wheels with real bead locks, and you've got a truck that looks like it just rolled off the starting line in Ensenada. But the Baja 5T goes way beyond looks, under the skin is a tough truck with the power to mow down anything in its path. Power comes from a massive 26cc gasoline engine, delivering rock solid performance, easy tuning and run times of more than 30 minutes on a single tank. The high performance 8,000 RPM clutch and new high flow muffler give the Baja 5T the power to launch with a roost of desert dirt on the way to a screaming top speed of more than 40 MPH. For improved handling, the Baja 5T rear shock tower has been modified for increased rear suspension travel. All four shock absorbers have thick diameter shafts for extra durability. The VVC/HD shocks are tuned for smooth suspension dampening to help soak up the desert terrain. The innovative design of the Baja 5T includes a rigid 4mm aluminum alloy chassis for extreme durability. * Tough 2mm polycarbonate Baja 5T-1 desert truck body. Pre-painted, pre-trimmed with body post holes, pre-applied racing decals and clear tinted windows. * Oil-filled coilover shock set with large diameter shock shafts for increased durability, 16 hole rear piston with sealing ring for consistent damping, fully adjustable design for tuning options. * Extra bracing for durability, extended upper roll cage for spark plug protection. * 8-hole design, tough nylon construction, authentic bead-locks for durability and tuning options. Large diameter truck tires for realistic looks. Heavy duty rubber compound and thicker carcass for extra durability. * 26cc engine for more power, more torque, and more speed than 23cc engines. Equipped with a convenient pullstarter for quick and easy starting. A high capacity dual-element air filter keeps the engine running clean even in grueling off-road conditions, quick-change design for easy maintenance. Air cooled with built-in fan for consistent running temperatures. Fully adjustable carburetor with primer and kill switch. Now constructed using Torx screws for extra durability and easier maintenance, Torx T-27 wrench included. Gasoline powered for low-cost operation compared to nitro fuel, easier to tune and more consistent than nitro engines. More than 30 minutes of run-time per tank. * With all that power on tap from the Fuelie 26 engine, you need incredible drivetrain durability for all those difficult off-road conditions that you'll be tackling with your Baja 5T - and that's exactly what you get with these all metal transmission gears! * The sides of the truck are protected by new guards that deflect dirt and debris away from the chassis which will not only help keep cleaning and maintenance down but will also help to lower wear and tear on the components. The engine also receives dirt guards on both sides for extra protection. 2.4Ghz Radio System * The electronics included in every Baja RTR buggy and truck have to be suitable to the task of handling a car nearly a meter long that can go over 35 MPH - that includes a handy built-in electronic failsafe to prevent a runaway Baja! For this latest version of the Baja 5B 2.0, we've upgraded to a new 2.4GHz radio system that makes running your Baja safer and more enjoyable than ever. No need to worry about radio conflicts, crystals, or radio interference, this Baja is equipped with the latest Spread Spectrum radio technology that delivers worry-free driving. The heavy-duty steering servo now includes tough metal gears and an aluminum steering arm for extra durability. A powerful sub-C type 6-volt receiver pack powers the servos for confidence and longevity. You'll find that many Baja bashers don't find a need to upgrade the radio system, as it's already perfect for the task! o Spread Spectrum DSSS - no frequency worries when running with dozens of cars at the same time o 2.4GHz - high frequency operation eliminates radio interference o Easy operation - simplified feature list avoids the complexity of computerized radios o Ergonomic design - comfortable pistol grip handle and foam steering wheel o No crystals needed - saves money and improves reliability o Built-in failsafe function - protects the car from low voltage runaways o Steering dual rate - easily fine tune the steering to track conditions o Servo reversing switches - quickly reverse the servos for multiple applications o Low battery warning - a flashing LED indicates when the transmitter batteries are running low * Disc Brake System - Braking is controlled by a vented steel/aluminum hybrid brake rotor and semi-metallic brake pads for smooth and consistent stopping power. * Truck Body Mounts - Tough nylon construction and 8 mounting points keep the truck body securely mounted, fully adjustable design for compatibility. * Moulded Rear Spoiler - moulded nylon rear spoiler for stable handling. moulded nylon rear body brace for body protection, includes provisions for optional rear LED tail lights. * Aluminum Alloy Diff Case - For increased drivetrain durability and extended time between maintenance. * Heavy Duty Rear Dogbones - Metal construction with rubber dirt boots for extra durability with high horsepower engines like the Fuelie 26. * Front Skid Plate Bumper - Adjustable skid plate front bumper protects the truck on big jumps, now with 4 headlights for realistic Trophy Truck looks. * Dirt Guards - New side guards deflect dirt and debris away from the chassis. The engine also receives dirt guards on both sides for extra protection. * Full Ball Bearings - 23 precision metal ball bearings for efficiency, durability, and extended maintenance intervals. * Front & Rear Sway Bars - Sway bars are used on the front and rear suspension for precise handling and stable steering feel. * Modified Rear Shock Tower Brace - Relocates shocks for increased rear suspension travel for stable performance on rough surfaces and soft landings over jumps. * Heavy Duty Inner Foam - Special heavy duty rear inner foam inserts for extra durability and extended tire life. * Revised Gearing - New 19T transmission top gear adapts the drive ratio for quick acceleration and high top speed when using truck tires. * High Flow Muffler - Large capacity design, tuned for increased horsepower. * SFL-10MG2 Metal Gear Steering Servo - Tough metal final gears for extra durability and reliable steering. Ball bearing equipped and water resistant. This oversized steering servo has high torque specs, making it a perfect match for the Baja 5T. * Heavy Duty Beadlocks - Reinforced design increases durability of the wheels and tires. Beadlocks allow the removal and replacement of individual parts of the wheels and tires for maintenance. * 8000 RPM Clutch - Lightweight clutch and heavy duty spring launches the Baja 5T at higher RPM for more punch off the line. * Anodized aluminum Parts - Black anodized 4mm 6061-T6 aircraft grade extruded and CNC milled chassis, orange and gunmetal anodized alloy parts give the Baja 5T an aggressive look. * Double Wishbone Suspension - Full double wishbone front and rear suspension to soak up off-road bumps and jumps. Consistent geometry throughout the full stroke of the suspension movement for precise handling. * Adjustable Suspension - Turnbuckles for quick and easy adjustment of toe-in. Fully adjustable camber and caster for tuning the handling to a wide variety of conditions. High quality nylon is used throughout the suspension for protection from crash damage. FEATURES: INCLUDES: * HPI Baja 5T RTR truck with 1.6 cu in (26cc) gasoline engine * 2.4GHz radio system * Two water resistant servos * 3.4oz (100cc) 2-cycle oil * 2oz (60cc) shock oil * 1oz (30cc) diff oil * 1oz (30cc) air filter oil * Tube of gear grease * 3000mAh receiver pack * Wall charger * Body with wing * Extra air filter * Wrenches, decal sheet and illustrated instruction manual REQUIRES: * Unleaded Gasoline: 87-93 octane (mix gasoline and oil at 25:1 ratio) * Transmitter Batteries: 8 AA * Screwdriver: Flat blade, 3/16" (4-5mm) wide TECHNICAL SPECS: * Length: 35.4" (900mm) * Front Width: 17.3" (440mm) * Rear Width: 18.1" (460mm) * Height: 12.6" (320mm) * Weight: 27.8lbs (12.6kg) * Wheelbase: 22.4" (570mm) * Ground Clearance: 3" (76mm) * Front Tread: 14.5" (370mm) * Rear Tread: 15.4" (391mm) distance between center of tires side-to-side * Front Track: 17" (432mm) * Rear Track: 17.8" (453mm) distance between outer edges of tires side-to-side * Tires Front: Outer Diameter: 7.5" (190mm), Width 2.4" (60mm) * Tires Front: Inner Diameter: 5.1" (130mm) * Tires Rear: Outer Diameter: 7.5" (190mm), Width 2.7" (70mm) * Tires Rear: Inner Diameter: 5.1" (130mm) * Body Length: 35.5" (902mm) * Body Width: 17.5" (445mm) * Body Height: 8.25" (210mm) * Body Thickness: 0.08" (2mm) Click picture to enlarge

HPI NITRO MT 2 G3.0 1/10 4WD TRUCK RTR

How do you make the next generation Nitro MT 2 truck even better? Add more power, more speed, and extra durability! We added the powerful and exciting G3.0 engine which has already been setting things alight in the Firestorm 10T. The G3.0 has .18 cubic inches of displacement (versus .15 cubic inches on the T-15 engine) that helps it crank out more torque and higher top speed, propelling the HPI Nitro MT 2 G3.0 to over 45mph! Now that's FAST! For maximum power we optimized the Gear ratios for the G3.0 Engine and added a new Aluminum dual chamber tuned pipe and Aluminum tube Header to help the Engine breathe freely and efficiently, and a new high flow dual-stage air filter that helps keep out dust and dirt for extended Engine life! A new 100cc fuel tank is 50% larger than the original Nitro MT 2 fuel tank for extended run time between pit stops. To handle the extra power, the Chassis and suspension have been upgraded with redesigned front suspension parts for improved strength, a heavy-duty clutch bell, and tougher diff Gear material for extra durability. The combination is tough to beat tougher and faster, all in a ready-to-run 4WD 1/10th Scale truck platform that has extensive parts support and tuning options.! The all-new Dirt Force Body is pre-painted with bold graphics, and comes pre-trimmed and mounted to the Chassis with the decals pre-applied for the ultimate in ease and good looks. It doesnt get easier than that! And now you have the choice of two different Body colors, deep metallic blue with silver and black stripes, or bright red with orange and black stripes. To top everything off we added shiny chrome 6-spoke Scorch Off-Road wheels, realistic Yokohama Geolander tires, and a stealthy grey anodized chassis!! Add all of these new features and upgrades to everything that's already great about the Nitro MT 2 Chassis and you get a fast and tough Off-Road truck that works great for racing and bashing! Extra-long suspension arms cushioned with long-stroke oil-filled shocks to soak up the bumps, tough shaft drive 4WD system for maximum grip on any surface, a full set of sealed ball bearings for efficiency, and a removable radio tray that lets you quickly clean and work on the truck its all there on the Ready-To-Run Nitro MT 2 G3.0! FEATURES: TECHNICAL SPECS: * LENGTH: 16.97 in. (431mm) * FRONT WIDTH: 12.40 in. (315mm) * REAR WIDTH: 12.80 in. (325mm) * WHEELBASE: 11.50 in. (292mm) * WEIGHT: 5.1 lbs. (2.3 kg) * REQUIRES: (12) "AA" alkaline batteries for transmitter/receiver; Nitro Fuel; Glow Starter; Fuel Bottle; 7.2V Battery and Charger ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter/Receiver (12 needed) * Nitro Fuel * Glow Starter * 7.2V Battery and Charger for Roto-Start System * Fuel Bottle Click picture to enlarge

HPI SAVAGE XL 5.9 RTR NITRO MONSTER TRUCK w/2.4Ghz Radio

Now Includes 2.4Ghz Spread Spectrum Radio System! The Savage XL - Extra Large Size and Mega Power! Check out the new addition to the Savage line-up! The Savage XL is the extra-large, extra-tough and extra-powerful big brother to the Savage X monster truck. For improved stability and handling, the Savage XL has a 55mm longer wheelbase and a 25mm wider track. With a longer wheelbase, wider stance and huge 5.9cc (.36 cubic inch) engine, the Savage XL is ready to rock and roll right out of the box. The HPI design team added strategically strengthened hop-up parts to tame the massive K5.9 power for unmatched durability. The Savage XL soaks up the rough stuff with ease because it's the biggest, toughest, and most powerful Savage ever!. Awesome XL Looks! The Savage XL definitely looks the part of the massive monster truck! The extended wheelbase is the perfect evolution of the Savage design, and the extended chassis and larger tires are a perfect match for the new, bigger 'GT Gigante' body! The wide front grill and huge headlights of the GT Gigante body merge with the flared wheel arches front and rear for a huge 'wow factor,' adding to the impression of huge size and strength! The large Terra Pin tires fit the body perfectly for a scale monster truck look that's sure to intimidate the opposition at your local bashing arena! But the Savage XL isn't about just looking great, the HPI designers went all-out to make sure it performs as good as it looks! Size Does Matter . . . Bigger in every dimension than the standard Savage X, the Savage XL is longer, wider, taller, more ground clearance and tires that are nearly 7" in diameter! It's based on the practically indestructible Savage X chassis and features durability upgrades like thicker 3mm TVP chassis plates, 3mm alloy engine plate, machine-cut steel differential rings and pinion bevel gears, steel spur gear, heavy-duty clutchbell, extra heavy-duty dogbones, larger diff outdrives, machined brake hub, dual fiber disk brakes and much more! Extra-Long Alloy Chassis To get the long wheelbase of the Savage XL, the HPI designers developed all-new extended TVP (Twin Vertical Plate) chassis made from 3mm thick 6061 aluminum. 6061-series aluminum is light and strong and provides the strength for stretching the Savage platform to its limits! The chassis has Savage XL logos etched into the chassis to really make it stand out! The engine is fitted to a one-piece engine mount with an extra-thick 3mm engine mounting plate. These are the thickest TVP and engine plate parts ever offered on a Savage monster truck, giving the Savage XL the strength to withstand the torque of the massive Nitro Star K5.9 engine.! NOW INCLUDES: High Quality 2.4GHz Spread Spectrum Radio! The reliable and sturdy HPI TF-20 2.4GHz radio controls the Savage Flux HP, giving you superb control in a well-designed pistol-grip radio! The steering wheel design makes you feel as if you're actually driving the truck, and the trigger-style throttle and brake controls provide you with finger-sensitive action when accelerating and stopping! The radio transmitter features DSSS technology that eliminates the need for frequency crystals so you can drive with your friends without worrying about frequency conflicts or interference. The TF-20 has servo reverse switches, easy access to radio adjustments and simple AA battery replacement. The RF-20 receiver takes the commands from the transmitter and transfers them reliably to the Flux Blur ESC and the steering servo. Taking care of the steering duties for the Savage Flux HP is the tough metal-gear HPI SF-50 high-torque servo, which has plenty of grunt to turn the front wheels at low and high speeds, in any sort of terrain. A truck this size needs the power and torque of a strong servo, and the SF-50 is just the ticket. The HPI TF-20 radio gives you long-range and reliable communication with your truck. If you ever want to upgrade your electronics you'll find it extremely easy, because all of the electronics are standard-size RC components with standardized connectors. The components can be upgraded or replaced whenever you like, or even moved into a different RC vehicle in the future. The Savage Flux HP will accept any standard-size servos. FEATURES: * Huge Terra Pin All-Terrain Tires * AMAZING: 3 Speed Fully Adjustable Transmission Installed * Wider Stance & 17mm Hex Hubs * New Tougher Suspension Uprights * Reinforced All-Metal Differentials * Larger Diff Outdrives * Thicker Dogbones * Machined Steel Spur Gear * Aluminum Three-Shoe Clutch * High Torque Metal Gear Steering Servo * NOW INCLUDES: Rechargeable Receiver Pack and Charger! * Now Includes High Quality 2.4GHz Spread Spectrum Radio * Tuned Exhaust System * Tough ABC Construction * Dual-Stage Air Filter * Roto Start 2 Installed * High Quality Radio Gear * Full-time shaft drive 4WD system for maximum grip, power and grunt! * Extra tough slipper clutch for drivetrain security when landing big-air jumps * Massive 160cc fuel tank for long run times and huge amounts of bashing and racing fun. * Easy-access radio box protects the electronics from splashes, dirt and more * Eight long-stroke oil-filled shock absorbers provide confidence over the jumps and on big-air landings * Savage X shock towers for loads of strength and adjustable suspension settings * Double wishbone suspension for amazing handling and performance at any speed * Lightweight suspension arms improve suspension action and give great response in corners and over bumps * Hardened 4-gear diff setup can handle the abuse of high-horsepower engines * Alloy differential cases enhance drivetrain reliability and reduce maintenance downtime * Full array of heavy-duty drivetrain components, from clutch to brakes and outdrives to hubs, ensure you have plenty of fun! * Machined steel brake hub and dual red fibreglass brake discs provide secure and fast stopping power * Cam-type servo saver steering arms improve the efficiency and power of the steering servo * Extremely easy access to front and rear differentials - no chassis disassembly required to get to diffs or tranny gears! * Savage X-style vertical transmission case for fast disassembly and simple access to internal gears * Full set of rubber-sealed ball bearings for maximum efficiency and power from the engine. * Bigger, tougher 'GT Gigante' body has classic Savage styling and strength with 0.60" thickness polycarbonate! TECHNICAL SPECS: * LENGTH: 590mm (23.2in.) * WIDTH: 450mm (17.7in.) * WHEELBASE: 395mm (15.5in.) * TIRE DIAMETER: 180mm (7in.) * REQUIRES: (8) "AA" alkaline batteries for transmitter; (1) 7.2V stick pack; (1) Charger for 7.2V battery; Nitro Fuel; Glow Starter; Fuel Bottle ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed) * 7.2V Stick Pack (1 needed) * Charger * Nitro Fuel * Glow Starter * Fuel Bottle Click picture to enlarge

HPI 1/8 SAVAGE X 4.6 RTR NITRO MONSTER TRUCK

The all-new HPI Savage X 4.6 is our fastest and strongest ready-to-run Savage . . . EVER! That's right, we've raised the bar by adding a massive F4.6 engine and beefed up the chassis and drivetrain to handle the power. The result is a truck that has enough Big Block power to do wheelies on command with a scorching top speed of more than 45 MPH. A huge list of performance and durability upgrades come standard in the RTR Savage X 4.6, so you know that you've got a truck that can handle extreme off-road driving. Savage X 4.6 Durability Eight long coil-over shocks absorb any type of rough terrain you can throw at the RTR Savage X 4.6, and beefy suspension arms and uprights can take the punishment of big-air drops and top speed runs over bumpy terrain. Keeping everything protected is the reinforced "X" TVP chassis, which features a custom 'X' graphic. Structural webbing and extra screws have been added to the central gearbox to improve durability, and add stiffness. Extra material was added to the skid plates and bumper to help the Savage X 4.6 survive huge jumps and crashes. The engine mount and engine plate are now thicker to give you more durability and endurance, especially when you're landing massive jumps! Savage X 4.6 Speed The new F4.6 powerplant is designed for one thing and one thing only - huge amounts of horsepower! Nearly 3hp, in fact! Enough horsepower to get the Savage X 4.6 up to 45mph (73kph)! And Big Block TORQUE is always on tap, just pull the throttle and you'll know you're not driving a small block. You want speed? You want torque? You've got it! The F4.6 engine is a new HPI high-power unit with the proven HPI Nitro Star reliability, featuring 2.9hp from its .28 cubic inch displacement! A purple anodized machined aluminum cooling head keeps the engine cool. Rough off-road terrain and extreme stunts are not a problem with this engine! The F4.6 features true ABC construction (Aluminum piston, Chrome-plated Brass sleeve), 8 port tuning, a 7.5mm composite carburetor, heavy duty triple shoe clutch, plus an updated Roto Start 2 electronic starting system for easy starting. A dual-stage air filter protects the F4.6 from dust and dirt kicked up by the 4WD action! The F4.6 engine is so fast, in fact, that HPI designers made significant improvements to the chassis, gear cases and other parts of the truck to beef it up so it could handle the extra power! The F4.6 engine pumps out nearly 3 horsepower and sits on an improved engine mount and thicker engine plate to give you more durability and endurance, especially when you're landing massive jumps! Drivetrain Our designers wanted to make sure the Savage X 4.6 drivetrain could handle the extra power of the Nitro Star F4.6. The Savage drivetrain features a permanent 4WD system and spins on rubber-sealed ball bearings, plus it features an adjustable 2 speed transmission. To add extra strength, aluminum alloy diff cases are now standard on the front and rear differentials, pre-installed and shimmed to extend the maintenance interval of the HPI 4-gear differential. The 17T clutch bell has been modified so it engages the spur gear with extra consistency. A steel spacer is used on the clutch bell, which provides more durability than the brass spacer. The adjustable slipper clutch features a slipper pad made from a more durable material, so there's less maintenance and more driving! Finally, to make sure you can stop this beast as quickly, the Savage X 4.6 is equipped with a new twin vented disk brake made from heat-resistant fiber material to give you more stopping power! Go Where Buggies and Truggies Fear To Tread! When normal 4WD can't cut it, when delicate racing parts fail, or when the terrain is simply too terrifying to race on, that's when the big-block 1/8 scale Savage X series of trucks is in its element! Engineered for the most brutal of environments and built for durability in the most extreme terrain, the Savage X 4.6 is the ultimate 'basher' monster truck! Fat, chunky treads on each wheel grip any type of terrain, whether wet or dry, mud or tarmac. The full-time 4WD transmission pulls the truck over and through anything in its path. Eight long coil-over shocks absorb huge drops and help give extra traction on rough surfaces. Combine all this with the monster horsepower of the new 2.9hp F4.6 engine, and you get the roughest, toughest truck around! With all of this power and durability, the jumping ability of the Savage X 4.6 is unsurpassed by any other monster truck. With a top speed of over 45 MPH, hitting a ramp with something this size must be seen to be believed! Back flips, forward flips, double back flips and more stunts are easy with this much power and control! Landing the truck is easy, too: big shocks absorb the landings and tough suspension parts take the abuse of jumping with ease. FEATURES: * Nitro Star F4.6 2.9hp 8-port rear-exhaust engine delivers massive torque and wheelies on command! * Stronger TVP (Twin Vertical Plate) chassis for improved durability and strength. * 7075-series 2.5mm aluminum engine plate is thicker for more resistance to bending under stress. * Dual-stage air filter to protect the engine from dirt and fine dust. * Adjustable dual disk fade-resistant brake set for incredible stopping power. * Aluminum diff cases to prevent spreading of the internal gears. * Optimized clutch bells engage spur gear better for longer gear life. * Steel clutch bell spacer for longer life. * Increased webbing on central gearbox for greatly increased durability in the rough stuff. * Stronger front and rear skidplates and bumpers, additional material was added in key areas. * Adjustable slipper clutch equipped with a durable slipper pad for long life. * Pre-trimmed & painted Nitro GT-2 body shell supplied in two new paint schemes with decals pre-applied! * Full-time shaft driven 4WD system for maximum grip, power and grunt! * Wide-track suspension gives you smooth driving and great handling - nearly 17 inches (43cm) wide! * Eight long-stroke oil-filled shock absorbers provide confidence over jumps and big-air landings. * Adjustable 2-speed transmission with hardened metal gears gives you quick acceleration and top speed! * Massive 160cc fuel tank for long run times and huge amounts of bashing and racing fun. * X-style clipless radio box protects the electronics. * Lightweight suspension arms improve suspension action and give great response in corners and over bumps. * Full set of rubber-sealed ball bearings for maximum efficiency. * Stiff racing springs for superb driving feel and suspension action. Adjustable turnbuckles. * Hardened 4-gear diff setup can handle the abuse of high-horsepower engines like the F4.6. * Cam-type servo saver steering arms improve the efficiency and power of the steering servo. * The low center of gravity chassis drops the engine and center gearbox lower than the Savage 25, resulting in better handling and faster lap times. * Large 17mm metal alloy hex hubs hold the wheels securely to prevent the hex stripping in the wheels under heavy load applications. * Lightweight GT-2 tires with aggressive tread pattern for excellent all-terrain traction and long tire life. The GT-2 tires are mounted and pre-glued on Chrome Warlock wheels. TECHNICAL SPECS: * LENGTH: 534mm (21in.) * WIDTH: 427mm (16.8in.) * HEIGHT: 254mm (10in.) * REQUIRES: (12) "AA" alkaline batteries for transmitter/receiver; (1) 7.2V stick pack; (1) Charger for 7.2V battery; Nitro Fuel; Glow Starter; Fuel Bottle ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter/Receiver (12 needed) * 7.2V Stick Pack (1 needed) * Charger * Nitro Fuel * Glow Starter * Fuel Bottle Click picture to enlarge

HPI WHEELY KING 4 X 4 RTR MONSTER TRUCK

The action just got even more intense with the announcement of the HPI Wheely King 4X4 truck! This 4X4 is a true-to-scale monster truck that features full-time 4WD for traction that allows it to go anywhere. From car crushing stadium monster truck action to rock crawling in the mountains, the Wheely King 4X4 can do it all. And of course, awesome wheelie action is available with a pull of the trigger! With custom tuned weight distribution and a rear wheelie bar, easy controlled wheelies are part of the action every time you drive the Wheely King 4X4! Watch it drive long stretches with its wheels in the air. See it pop a wheelie out of every corner out on the track. And if wheelies just arent your bag, all it takes is a few simple modifications to take your Wheely King 4X4 to the next level rock crawling! The Wheely King is the ultimate combination of true-to-scale monster truck looks and fun high-flying monster truck action! The Wheely King 4X4 is great for the show-and-go crowd - fat chrome wheels hold 5.4" all-terrain Mud Thrasher monster truck tires, and the Twin Vertical Plate (TVP) chassis features a super cool chrome-plated tube design that looks just like the real monster trucks you've enjoyed watching! The front and rear solid axles feature pivot joints and a realistic multi-link monster truck suspension for easy driving and control, plus the ultimate scale look! Topping off the Wheely King is a painted and trimmed monster truck body, mounted on adjustable body mounts that allow you to fit all kinds of fun and exciting bodies. It all adds up to a great kit and hours of enjoyment! HPI Wheely King Monster Truck The unique monster truck-style multi-link suspension gives the Wheely King huge amounts of front suspension travel - combined with the all-terrain semi-pneumatic rubber tires and 4 oil-filled coil-over shock absorbers, the Wheely King is perfect for crawling over kerbs, grass and anything that gets in your way! Putting the power to the rear straight axle is an efficient and tough universal slider shaft, perfect for keeping the muck and dirt out of the drive train! Protecting the drive gears is a strong plastic cover, held in place with convenient body clips. A full set of metal ball bearings enhances the efficiency of the drive train, helping the Wheely King get over 20 minutes of runtime out of its 7.2v battery! With a completely assembled chassis, painted body and a full set of electronics, it's a simple matter of charging the battery to have some fun! The Wheely King features the high-quality, proven HPI TF-1 27MHz transmitter. The SF-1 servo is reliable, durable and plenty strong for the Wheely King, performing its duties under all conditions. The installed reversible electronic speed control (ESC) features a reverse delay to protect the gear box and drive gears, and gives the Wheely King maximum runtime while you're out having a blast. For the ultimate in control and feedback from the truck, the Wheelie King features fully proportional steering and throttle. A high-torque 540-size 27-turn motor is used to power the Wheely King and is easily upgradeable to any normal 19-turn or faster motor. The 7.2v 1500mAh Ni-Cad battery gives you over 20 minutes of smile-inducing runtime, and comes assembled with quick-change connectors. Charge the battery with the handy included wall charger, or use any standard RC battery charger. FEATURES: * LENGTH: 431.8mm (17in.) * WIDTH: 297.2mm (11.7in.) * HEIGHT: 254mm (10in.) * WHEELBASE: 238.8mm (9.4in.) * TIRES: 135mm x 69mm (5in. x 3in.) * SUSPENSION TRAVEL: 152.4mm (6in.) * REQUIRES: Only 8 "AA" batteries for the transmitter - that's it!!! ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

Redcat Racing Vortex SS 1/10 Scale Nitro Desert Truck

Now With 2.4GHz Radio Whip up some major dust devils with the intense new Vortex SS Desert Truck! This 4X4 ready to run nitro truck boasts a durable polycarbonate crash-resistant body, composite disc brakes and huge soft compound RC off road tread thats sure to keep this sand-swallowing beast tracking straight through the roughest terrain. This dune basher features an air cleaner assembly composed of a heavy duty foam element to keep dirt, dust, and other debris out of its powerful nitro fueled 3.0cc VX-18 engine. A resilient 2.5mm thick aluminum alloy chassis, 4-wheel independent suspension, 4 oil filled aluminum bodied shocks, 2 speed transmission and many other high performance features give this beast an explosive edge over the most difficult dunes. Specifications: Motor Type Nitro 3.0cc .18 Vertex Transmission 2-Speed Drive System 4 Wheel Drive Length Width Height Wheelbase 275mm Ground Clearance 26mm Fuel Tank Capacity 75cc Chassis Type 2.5mm 6061 Aluminum Brake Type Composite Disc Shocks Aluminum Body Oil Filled Speed Control Battery Radio System 2.4GHz Radio System

Redcat Racing Volcano S30 1/10 Scale Nitro Monster Truck

The Volcano S30 replaces the Volcano SV. We upgraded the popular Volcano SV with an SH brand engine, performance header and aluminum tuned exhaust. Feel the the eruption with the powerful Volcano S30! Featuring a potent nitro fueled 3.0cc SH-18 engine, tuned exhaust, performance header, durable 2.5mm thick aluminum alloy chassis, 4-wheel independent suspension and 8 oil filled aluminum capped shocks, the popular Volcano S30 has the explosive accelerative force of a miniature Mount St. Helens. This 4X4 ready to run brute boasts a polycarbonate bash-resistant body, composite disc brakes and huge soft compound RC off road tread thats sure to trample the toughest terrain. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.0cc .18 SH Transmission Single Speed Drive System 4 Wheel Drive Length 420mm Width 330mm Height 185mm Wheelbase 275mm F/R Ground Clearance 30mm Fuel Tank Capacity 75cc Chassis Type 2.5mm 6061 Aluminum Brake Type Composite Disc Shocks 8 Oil Filled Alumunim Capped Speed Control Battery Radio System 2 Channel AM Click picture to enlarge

Redcat Racing Shockwave 1/10 Scale Nitro Buggy

Stun your competition with the bold Shockwave 1/10 scale. While on the track or just bashing around at home, it will handle all your off road 4-wheeled drive adventures with its powerful nitro 2.67cc Vertex engine, aluminum capped shocks, composite disc brakes and much more. Get started in this exciting hobby with the Shockwave for just $139.99 or step it up a notch with the Tornado S30 for only $50 more. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 2.67cc Vertex Transmission Single Speed Drive System 4 Wheel Drive Length 400mm Width 250mm Height 160mm Wheelbase 275mm (F/R) Ground Clearance 26mm Fuel Tank Capacity 75cc Chassis Type 2.5mm 6061 Aluminum Brake Type Composite Disc Shocks Aluminum Capped Oil Filled Speed Control Battery Radio System 2 Channel AM Click picture to enlarge

Redcat Racing Aftershock 3.5 1/8 Scale Nitro Desert Truck

Liven up your weekend bashing adventures with the Aftershock 3.5, part of the UltraLite Series from Redcat Racing! This big block desert truck will fulfill your off road needs. With maximum speeds up to 50mph, this 4X4 truck incorporates a front and rear sealed differential, composite disc brakes, sealed 2 speed transmission and a nitro fueled 3.5 cc .21 SH big block engine that delivers massive acceleration. Desert truck soft compound off road tires, oil filled big bore shocks and a durable 2.5 mm aluminum chassis make the Aftershock 3.5 the perfect 1/8 scale truck at a very competitive price. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.5cc. .21 SH Transmission 2-Speed Drive System 4 Wheel Drive Length 504mm Width 305mm Height 165mm Wheelbase 325mm (F/R) Ground Clearance 33mm Fuel Tank Capacity 125cc Chassis Type 3mm 6061 Aluminum Brake Type Composite Disc Shocks Oil Filled Big Bore Shocks Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

Redcat Racing Avalanche XP Redcat Racing 1/8 scale Nitro RTR Monster Truck

Wreak havoc with this robust 4X4 monster; the Avalanche XP has it all. Competition will cringe at its massive stance, explosive acceleration and superior handling capability. A big block M28 engine, three sealed differentials, dual disk brakes, sway bars, high performance front/rear sealed differentials, high torque steering servo, tough servo saver, and a high-quality radio system all help keep this impressive RC Monster Truck in the game. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Now with Redcat DSM-2C 2.4GHz Remote Control.

Redcat Racing BackDraft 3.5 1/8 Scale Nitro Buggy

Liven up your weekend bashing adventures with the BackDraft 3.5, part of the UltraLite Series from Redcat Racing! This big block buggy will fulfill your off road needs. Cars are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. With maximum speeds up to 50mph, this 4X4 buggy incorporates a front and rear sealed differential, composite disc brakes, sealed 2 speed transmission and a nitro fueled 3.5 cc .21 SH big block engine that delivers massive acceleration. Buggy style soft compound off road tires, oil filled big bore shocks and a durable 2.5 mm aluminum chassis make the BackDraft 3.5 the perfect 1/8 scale buggy at a very competitive price. Now with DSM-2C 2.4GHz Remote Control. Specifications: Motor Type Nitro 3.5cc. .21 SH Transmission 2-Speed Sealed Transmission Drive System 4 Wheel Drive Length 490mm Width 305mm Height 190mm Wheelbase 325mm F/R Ground Clearance 30mm Fuel Tank Capacity 125cc Chassis Type 3.0mm 6061 Aluminum Brake Type Composite Disc Shocks Oil Filled Big Bore Shocks Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

Redcat Racing Caldera 3.0 1/10 Scale Nitro Monster Truck

A 2-Speed sealed transmission, explosive SH .18 3.00cc Nitro engine & slide carburetor make the Caldera 3.0 a volatile mini Mount St. Helens on or off the track. Faster acceleration leads to high octane excitement with this 4X4 monster truck equipped with aluminum alloy chassis, 4 big bore oil filled aluminum capped shocks , polycarbonate bash-resistant body, composite disc brakes and much more. This bold and aggressive 4X4 vehicle commands attention with major MAGMA-tude! Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars, trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.0cc .18 SH Transmission 2-Speed Sealed Transmission Drive System 4 Wheel Drive Length 450mm Width 320mm Height 210mm Wheelbase 305mm F/R Ground Clearance 30mm Fuel Tank Capacity 75cc Chassis Type 2.5mm 6061 Aluminum Brake Type Composite Disc Shocks 4 Big Bore Oil Filled Aluminum Capped Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

Redcat Racing Earthquake 3.0 1/8 Scale Nitro Monster Truck

Liven up your weekend bashing adventures with the Earthquake 3.0, part of the UltraLite Series from Redcat Racing! This monster truck will fulfill your off road needs. The Earthquake 3.0 4X4 truck incorporates a front and rear sealed differential, composite disc brakes, sealed 2 speed transmission and a nitro fueled 3.0 cc SH .18 SH engine that delivers massive acceleration. Huge soft compound off road tires, oil filled big bore shocks and a durable 2.5 mm aluminum chassis make the Earthquake 3.0 the perfect 1/8 scale truck at a very competitive price. Now with DSM-2C 2.4GHz Remote Control. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.0cc .18 SH Transmission 2-Speed Drive System 4 Wheel Drive Length 510mm Width 380mm Height 250mm Wheelbase 325mm F/R Ground Clearance 58mm Fuel Tank Capacity 125cc Chassis Type 3.0mm 6061 Aluminum Brake Type Composite Disc Shocks Oil Filled Big Bore Shocks Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

Redcat Racing Earthquake 3.5 1/8 Scale Nitro Monster Truck

Liven up your weekend bashing adventures with the Earthquake 3.5, part of the UltraLite Series from Redcat Racing! This big block monster will fulfill your off road needs. With maximum speeds up to 50mph, this 4X4 truck incorporates a front and rear sealed differential, composite disc brakes, sealed 2 speed transmission and a nitro fueled 3.5 cc .21 SH big block engine that delivers massive acceleration. Huge block tread soft compound RC off road tires, oil filled big bore shocks and a durable 2.5 mm aluminum chassis make the Earthquake 3.5 the perfect 1/8 scale truck at a very competitive price. Now with DSM-2C 2.4GHz Remote Control. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 3.5cc. .21 SH Transmission 2-Speed Drive System 4 Wheel Drive Length 510mm Width 380mm Height 250mm Wheelbase 325mm F/R Ground Clearance 58mm Fuel Tank Capacity 125cc Chassis Type 3.0mm 6061 Aluminum Brake Type Composite Disc Shocks Oil Filled Big Bore Shocks Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

HPI SWITCH RTR w/ABARTH 500 BODY

The HPI Switch is a fun front wheel drive (FWD) Electric car that makes getting into R/C quick, easy, and inexpensive. The Switch is completely Ready-To-Run with a factory-assembled chassis, painted/trimmed Body with decals applied, and complete electronics that include the transmitter/receiver, reversible electronic speed control, Battery Pack and AC charger. Based on the "True Ten" Scale introduced with the HPI Cup Racer, the Switch can be adjusted for width and wheelbase to accept a wide variety of mini-size bodies and all of the latest HPI Cup Racer bodies. The Switch, HPI's first FWD car, comes with a simple but very rigid tub chassis. All heavy items are located low on the Chassis so the car corners briskly with minimum roll. FWD and a front midship Motor layout give the car stable handling that's perfectly suited for parking lot racing for drivers of all levels. You don't need to be an advanced driver to enjoy the Switch! FEATURES: * Electric-Powered True Ten (Mini size) On-Road car * Wheelbase can be adjusted from 210 or 225 to fit various Mini bodies * Width can be adjusted between 164mm and 174mm * Total of 8 Body mount configurations * Independent McPherson Strut Suspension * 12 ball bearings are used in the drivetrain * 7.2V 1500mAh rechargeable Ni-CD battery pack * Quick-change battery holder * High Torque 35T Saturn Motor * Front midship Motor layout * Cam-type Motor mount for easy Gear mesh adjustments * AC Wall Charger * Black Chrome Wheels * Molded Rubber Tires * Steel Dogbones * Complete Instruction Manual * REQUIRES: Only 8 "AA" batteries for the transmitter TECHNICAL SPECS: * Length: 285mm * Width: 164mm (adjustable) * Height: 65mm * Weight: 1080g (body not included) * Wheelbase: 210 / 225mm * Tire Size: 60mm x 26mm ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI E10 MAZDA RX-7 DRIFT CAR RTR

The E10 Series from HPI Racing provides an entry level 1/10th scale electric car designed for fun driving with realistic looks and performance - all at a low price. The HPI E10 Mazda RX-7 RTR was designed so anyone can take the wheel and give it a try! The RTR version arrives ready to run right out of the box with a fully painted body and a preassembled chassis - it's a simple matter of charge and go' for hours of fun. All of the details are there, from grills and windshield wipers to realistic 3D brake rotors and calipers inside the chrome Gram Lights wheels. The E10 looks so nice that owners might be tempted to just leave it on display, but the real fun comes when you grab the transmitter and start driving it! The E10 uses true full-time 4WD and independent suspension, making it easy to drive on paved parking lot surfaces. An enclosed drivetrain keeps dirt and dust out of the gears for low maintenance and reliability. A large foam bumper protects the car from crash damage, and the chassis and suspension have been strategically engineered for entry level performance and durability. And, the E10 uses standard body mounting points so owners can fit a wide variety of HPI Racing bodies to customize the look of their car. Most popular wheel and tires bolt right on for extra tuning and styling options. It's super-easy to choose from an extensive range of touring car, muscle car and drift car accessories to customize the E10! For extra excitement, the E10 is designed so that it can be easily converted from street/touring driving to drift without adding any new parts. The motor and radio equipment can be moved to optimize the weight balance for smooth drifting or high grip cornering. Complete instructions are included in the box for owners looking for a change of pace in driving styles. Features . . . looks . . . performance . . . price . . . the E10 is one of the easiest ways ever to experience the fun and excitement of driving an RC car! FEATURES: * Painted & Trimmed Body * Adjustable Body Mounts * Quick Change Battery Holder * Shaft Drive 4WD System * Shock Absorbing Foam Bumper * High Torque Saturn 27T 540 Motor * 7.2V Rechargeable Battery * AC Charger * TF-1 AM Radio System with RF-1 Receiver and SF-1 Steering Servo * EN-1 Electronic Speed Control with Reverse * T-Drift tires * Chrome Gram Lights 57S-Pro Wheels * Full RTR Package! - Only requires 8 "AA" Alkalines for Transmitter TECHNICAL SPECS: * Length: 14.8 (375mm) * Width: Adjustable 7.32, 7.56, 7.80 (186, 192, 198mm) * Wheelbase: 10 (255mm) * Weight: 2.8lbs. w/o body (1280g) * Drive System: Shaft Drive 4WD * Drive Ratio: 7.48:1 ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI E10 FORD MUSTANG GTR TOURING CAR

The E10 Series from HPI Racing provides an entry level 1/10th scale electric car designed for fun driving with realistic looks and performance - all at a low price. The HPI E10 Ford Mustang GTR was designed so anyone can take the wheel and give it a try! The RTR version arrives ready to run right out of the box with a fully painted body and a preassembled chassis - it's a simple matter of charge and go' for hours of fun. All of the details are there, from grills and windshield wipers to realistic 3D brake rotors and calipers inside the chrome Gram Lights wheels. The E10 looks so nice that owners might be tempted to just leave it on display, but the real fun comes when you grab the transmitter and start driving it! The E10 uses true full-time 4WD and independent suspension, making it easy to drive on paved parking lot surfaces. An enclosed drivetrain keeps dirt and dust out of the gears for low maintenance and reliability. A large foam bumper protects the car from crash damage, and the chassis and suspension have been strategically engineered for entry level performance and durability. And, the E10 uses standard body mounting points so owners can fit a wide variety of HPI Racing bodies to customize the look of their car. Most popular wheel and tires bolt right on for extra tuning and styling options. It's super-easy to choose from an extensive range of touring car, muscle car and drift car accessories to customize the E10! For extra excitement, the E10 is designed so that it can be easily converted from street/touring driving to drift without adding any new parts. The motor and radio equipment can be moved to optimize the weight balance for smooth drifting or high grip cornering. Complete instructions are included in the box for owners looking for a change of pace in driving styles. Features . . . looks . . . performance . . . price . . . the E10 is one of the easiest ways ever to experience the fun and excitement of driving an RC car! FEATURES: * Painted & Trimmed Body * Adjustable Body Mounts * Quick Change Battery Holder * Shaft Drive 4WD System * Shock Absorbing Foam Bumper * High Torque Saturn 27T 540 Motor * 7.2V Rechargeable Battery * AC Charger * TF-1 AM Radio System with RF-1 Receiver and SF-1 Steering Servo * EN-1 Electronic Speed Control with Reverse * T-Drift tires * Chrome Gram Lights 57S-Pro Wheels * Full RTR Package! - Only requires 8 "AA" Alkalines for Transmitter TECHNICAL SPECS: * Length: 14.8 (375mm) * Width: Adjustable 7.32, 7.56, 7.80 (186, 192, 198mm) * Wheelbase: 10 (255mm) * Weight: 2.8lbs. w/o body (1280g) * Drive System: Shaft Drive 4WD * Drive Ratio: 7.48:1 ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed)

HPI BRAMA 10B RTR BUGGY

Brand new and ready for off-road action is the totally fresh HPI Brama 10B, the first electric 4WD buggy from HPI! It's made to be tough, affordable, easy to work on, and 4WD shaft driven for high grip. The Brama 10B comes completely ready-to-run and is uses clean and quiet electric power so driving is as easy as it gets, just charge and go! Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Based on the tough E10 chassis, the Brama 10B has full-time 4WD for maximum traction on all off-road surfaces. We've added long suspension arms and long-stroke oil-filled shock absorbers to allow the Brama 10B to soak up rough terrain with ease. For durability and extra protection, a sealed shaft drivetrain keeps rocks and debris from slowing you down. You can keep the hammer down, the spiked Digger tires just keep going and going, biting and clawing through dirt, grass or hard-packed surfaces! The Brama 10B comes pre-built with a reliable HPI transmitter, steering servo, and a reversible electronic speed control so it accelerates and steers with precise movements. The included rechargeable 7.2V battery pack delivers power to the Saturn 35T motor for realistic off-road action. Just pop some AA's in the transmitter, charge up the 7.2V battery pack with the included charger and you're ready to drive. It's topped off with a racing buggy body for good looks, and a large rear wing for stability when the going gets tough! The Brama 10B is the quick, easy and friendly way to get into off-road action, priced low so anyone can grab the transmitter and experience the thrill of RC driving. FEATURES: * Shaft Driven 4WD * Oiled-Filled Shocks * Stick and Side by Side Battery Packs * Tub Chassis * Tough Nylon Double Wishbone Suspension * Preset Motor Mounting Positions * Durable Steel Dogbones * Durable Oversized Diff Outdrives * Multiple Shock Mounting Positions * Tough Nylon Steering Knuckles * 12mm Hex Wheel Adapter * New HPI TG-1 radio * 2000mah NiMH battery with Overnight Charger * HPI EN-1 Electronic Forward & Reverse Speed Controller (up to 21 turns) * Tough Nylon Rear Uprights * "Digger" Off-Road Tires * Tough Nylon Front Bumper * Pre-Painted Polycarbonate Bodyshell * Moulded Nylon Wing * Full RTR Package! - Only requires 8 "AA" Alkalines for Transmitter ACCESSORIES & EXTRAS: * Additional or Upgrade NiMh Batteries & Chargers * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI BRAMA 18B RTR 4WD BUGGY

The HPI Brama 18B 4WD Electric Buggy is small enough to run indoors or outdoors. It's made to be tough, affordable, easy to work on, and 4WD shaft driven for high grip. The Brama 18B comes completely ready-to-run and is uses clean and quiet electric power so driving is as easy as it gets - just charge and go! Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. The Brama 18B has full-time 4WD for maximum traction on all Off-Road surfaces. We've added long suspension arms and long-stroke oil-filled shock absorbers to allow the Brama 18B to soak up rough terrain with ease. For durability and extra protection, a sealed shaft drivetrain keeps rocks and debris from slowing you down. You can keep the hammer down, the tires just keep going and going, biting and clawing through indoor carpet, outdoor dirt, grass or hard-packed surfaces! The Brama 18B comes pre-built with a reliable HPI transmitter, steering servo, and a reversible Electronic Speed Control so it accelerates and steers with precise movements. The included rechargeable 7.2V 1100mAh Ni-MH Battery Pack delivers power to the Quark 28T Motor for realistic Off-Road action. Just pop some AA's in the transmitter, charge up the 7.2V Battery Pack with the included charger and you're ready to drive. It's topped off with a racing Buggy Body for good looks, and a large rear wing for stability when the going gets tough! The Brama 18B is the quick, easy and friendly way to get into indoor or outdoor R/C action, priced low so anyone can grab the transmitter and experience the thrill of R/C driving. FEATURES: * 1/18th Scale size for indoor or outdoor fun. * Full-time shaft drive 4WD system for maximum grip. * Front and rear skid plate bumpers protect the Buggy from the hazards of Off-Road terrain. * Solid upper links for extra durability and consistent suspension settings. * Quark 28T Motor for extended run time. * Ball bearings on the Differential outdrives and center driveshaft for maximum efficiency. * Stick pack battery with plug attached. * Durable rear wing provides aerodynamic Downforce for increased rear traction. * Tough polycarbonate painted Body with decals applied right out of the box. * High quality HPI TF-1 radio system included. * Adjustable shock mounting positions for fine tuning the suspension. * Molded tub Chassis design for strength and durability. * Mid-pin tires for Off-Road traction. * Tough Nylon dogbones and outdrives for a durable drivetrain. * Adjustable Body mounts. * Front and rear bevel-gear differentials for reduced maintenance. * Electronic speed control with reverse and brakes. * Electric power for clean and quiet performance. * Full RTR Package! - Only requires 8 "AA" Alkalines for Transmitter ACCESSORIES & EXTRAS: * Additional or Upgrade NiMh Batteries & Chargers * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI RACING 1/12 MINI-TROPHY 4WD DESERT TRUCK RTR

NEW IN STOCK NOW! For the Off-Road racing enthusiast, this is the perfect truck! It's a marriage of scale realism, HPI durability, drivability and most importantly - FUN! HPI Racing teams up with TSA Motorsports - In the name of Fun! Just when you think it's about time for HPI Racing to announce a new 1/10-scale 4WD Blitz or maybe a Full-Size short course racing program, well, HPI likes to do things a little differently. You better believe there is going to be some FUN involved. It's in our motto, "Creating Fun Since 1986!" HPI Racing is teaming up with TSA Motorsports' Dallas Luttrell and Bill "Wild Bill" Billington for their efforts in going back to the roots of Off-Road competition - THE DESERT! Dallas and Bill are the creative minds behind TSA Motorsports. Their approach to desert racing is a reflection of that creativity, very calculated, yet executed plain and simple. TSA's newly developed truck is different than most, breaking the proverbial mold! Dallas and Bill are not just grasping at shooting stars... they have been studying and watching desert Off-Road racing and most interestingly, the global Off-Road scene with events such as the Dakar rally. They have studied how the Dakar Rally type vehicles differ when compared to the USA's Trophy Trucks and how these vehicles handle the various terrain. They also studied the race strategies of different teams for these different types of terrain. For side-notes, they have studied the history books with a nod to Ivan Stewart for inspiration as well. Why all of these studies? Because TSA intends to learn their way to the top of the sport, to be a part of those few individuals who wish to try things differently. There are those who just want to go big and fast and follow the same "big trucks rule in the desert" theme. And there are those whose perseverance and dreams will fuel the passion for racing for a long time to come. TSA is here to stay! The last couple of years, Dallas and Wild Bill have been whooping it across the desert in the SNORE Series in what some people call a "Pre-Runner" or even a desert capable street truck. For the sideline enthusiast, they saw what could be achieved with off-the-shelf retail parts in a 2008 Toyota Tacoma. TSA's efforts landed them four Top-5 finishes in the 7200-class of the 2009 SNORE Off-Road Series. While the TSA team did not break any records or secure any major championships, for TSA, it had a lot more to do with mentality: the mental game and the approach with equipment. Adding to the facts, the Tacoma truck is not wildly different from any other desert truck. The TSA Tacoma is more like every truck sitting in the spectator parking lot. The Tacoma itself was its own experiment to learn from, but with a much larger plan brewing in the background. TSA built a new truck and HPI Racing built a new truck . . . Enter 2010 and lots of things happening in the background. The TSA Motorsports camp has been very secretive, quiet and very busy! Luttrell and Billington took the time while racing the Toyota Tacoma in 2009 to build an experimental chassis. With numerous test-design sessions, early 2010 they built another Chassis and tested more and finished up the creative design concept all while conspiring with HPI RACING. Same time, HPI Racing was busy developing too, as HPI Racing's USA based designer Hidekazu "Ito" Nishine has a passion for all things "truck!" Ito is the designer of the Nitro MT Series, the Wheely King/Crawler King Series and the HPI Savage Monster Truck, world famous for its brutal durability. Ito wanted to add a desert truck to his design milestones. PROJECT MINI-TROPHY 4WD DESERT TRUCK With TSA and HPI working on parallel Mini-Trophy desert projects, the highlight is TSA utilizing an independent suspension design base for their new 1:1 desert truck. Ito was thinking independent suspension as well and while normal for R/C, independent suspension is not so normal in the 1:1 off road race vehicles, especially with trucks. TSA is building this new truck to race in the 7200-class, basically a scaled down version of a trophy truck, more like a mini-truck that was once a 4-cylinder pick up truck. Most "mini-trucks" these days are not so "mini" and come with 6-cylinders, but compared to a 6,000+ lbs / 800 horsepower Trophy Truck, the 7200-Class is simply a "Mini-Trophy." TSA is using an in-line Jeep 6-cylinder HESCO built engine. HPI also likes the "Mini-Trophy" moniker and named this new [1:12 scale] 4WD desert truck accordingly. Stay tuned to your favorite RC news site or 1 to 1 motorsports news outlets for more information. SCALE REALISM It's no secret that Scale realism is what everyone wants and HPI Racing delivers this in a package influenced by the relationship with a Full-Size Off-Road desert race team - TSA Motorsports. An interesting note about this particularly "special project" is the fact that TSA used the Body styling from HPI Racing and shaped the TSA Full-Size 7200 Class truck to look like the HPI Mini-Trophy Truck. Yes, the HPI Mini-Trophy came first! HPI DURABILITY The HPI Mini-Trophy Truck uses nothing but the finest grade, high-impact Nylon plastic on the most critical areas of the truck - from the bumpers to the super beefy arms and everything in between. HPI's industry known strength and durability makes the MINI-TROPHY friendly for all, and most of all - FUN! DRIVABILITY With a four wheel drive system, driving is made easy. Drivability testing has rendered extremely impressive results. Add more power with a brushless system and the stability and control is still there! The truck simply drives really well in the loose dirt. When traction breaks loose and the rear end of the vehicle is swung out and on-throttle, the truck remains controllable. Bottom line, this 4WD technical feature adds to the overall fun factor. HISTORY OF FUN At HPI Racing, our motto is, "Creating Fun Since 1986." We keep that passion and driving force at the forefront and when projects like this are developed, we are especially excited with both the R/C vehicle replica and the relationship with the Full-Size race vehicle! HPI's passion for R/C is a reflection of our enthusiasm for motorsports. FEATURES: * Desert Truck Body - Realistic looking three piece Body with 1:1 replica race team graphics with windows to show driver figure set * Shaft drive 4WD - 4WD for high grip on any surface and the durability of shaft drive * Metal Gear Differentials - Tough metal gears for strength and durability * Steel Dogbones - Tough Steel Dogbones on all four corners * Aluminum Suspension Uprights - High strength Aluminum front and rear uprights * Aluminum Hubs - Greater strength and durability * Realistic Desert Racing Tires - Officially Licensed Yokohama Geolandar Tires * 4 Wheel Independent Suspension - Soaks up the ruts and bumps of desert terrain * Oil filled shocks - Oil filled shocks for smooth suspension dampening * Threaded Shock Bodies - Easily adjustable threaded shocks for quick Ride Height changes * Realistic Spare Tires - Two lightweight faux-spare wheels/tires are mounted in the truck bed for realistic desert truck looks * Realistic Interior with Two Driver figure set - Say hello to our two friends * Adjustable Slipper Clutch - The included slipper clutch protects the drivetrain and can be adjusted to suit track conditions * Complete Ball Bearings - A complete set of ball bearings is included for drivetrain efficiency and low maintenance * Skid Plate Bumpers - Front and rear skid plate bumpers for realistic looks and crash protection * Adjustable Body Mounts - Adjustable Body mounts to help fine tune the Body height and width * Tough Chassis - High strength Nylon tub Chassis for durability * Roll Cage - Complete interior roll cage for Scale looks and crash protection * Compatible Wheels - 1.9" wheels with 12mm hex hubs allow you to use a wide variety of aftermarket wheels * 12mm Hex Hubs - Industry standard for compatibility with a wide variety of optional wheels * Desert Truck Suspension - Realistic looking desert truck suspension arms for high grip and Scale looks * Brushless Capable - Strong gearbox to allow brushless upgrades TECHNICAL SPECS: * LENGTH: 533.4mm (21in.) * WIDTH: 233mm (9 3/16in.) * HEIGHT: 162mm (6 3/8in.) * WHEELBASE: 312mm (12 9/32in.) * REQUIRES: (1) 7.2V Stick Pack Battery; (1) Timed or Peak Charger for Battery; (8) "AA" batteries for the transmitter. ACCESSORIES & EXTRAS: * Venom 7.2V Stick Pack Batteries * Megatech MegaPeak AC/DC Peak Charger * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI CRAWLER KING JEEP WRANGLER RUBICON RTR

Get Crawling Fast and Easy! HPI makes getting right into crawling simple and fun with the excellent NEW Crawler King ready to run truck kit! With its tall Rock Grabber tires, heavy beadlock wheels, super-narrow chassis, front-mounted battery and motor, full-time 4WD and locked gearboxes, you will be be king of the mountain! Crawling allows you to attempt the impossible by attacking near-vertical cliffs, slick rock faces and piles of mountain rubble! Although in competitions the truck owners compete against each other, the magic appeal of rock crawling is that each driver competes against their own abilities, trusting in the strength of their equipment and the machine that is bringing them up the hill. The Perfect All-Around RC Truck! The Crawler King is a fantastic RTR rock crawler, but it can do so much more! When you drive the Crawler King, you can go anywhere - mud, sand, tarmac, rock, gravel and much more - and be sure of coming back again! The drivetrain is rock-solid, the parts are durable to come back from falls and tumbles, it performs like a champ and is strong enough to get over just about anything you can get to! It also looks great with the chrome wheels, off-road tires and painted and detailed bodyshell! The Crawler King makes an ideal first-time RC vehicle! When you're ready to hit the rocks, the Crawler King gets you started crawling with ease - with the ultra-flexible Wheely King 4x4 chassis as a starting point, we've added the excellent #87633 Rock Crawler Conversion for the best weight distribution, extra articulation and tuning, plus #4896 Rock Grabber tires for extreme grip and finally #3213 Rock 8 beadlock 2.2 inch wheels in chrome for great style and extra weight down low, right where you need it! To provide precise control for the Crawler King, we've added the excellent HPI TF-1 radio set with SF-1 servo and the torquey Crawler 55T motor provides the power, while our own EN-1 reversible speed controller handles the power. HPI Crawler King Suspension Travel The Crawler King is ready for competition in the 2.2 crawler class, with over 15cm (6 inches) of suspension travel and wheelbase that extends to the maximum legal length! You can easily tune the shock positions and lower link positions, giving you plenty of options to get your crawling rig to the top of the pile! Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. FEATURES: * Fully assembled crawler truck kit * Ready to Run with your choice of 2 bodyshells, pre-built chassis, assembled tires and installed electronics * Available with Land Rover Defender 90 or Jeep Wrangler Rubicon pre-painted & pre-cut bodyshells with decals applied * Full-time 4WD with sealed drivetrain * Long wheelbase chassis for sure-footed stability * Over 15cm (6 inches) of articulation to get over any obstacle * HPI Crawler 55T high-torque crawler-specific motor * HPI EN-1 reversible electronic speed controller * HPI TF-1 steering wheel radio system with SF-1 steering servo * HPI Rock Grabber crawling tires * HPI Rock 8 2.2 inch beadlock wheels with stainless steel rings * Front-mounted battery for best weight distribution * Slider driveshafts for secure power transfer * Multiple lower shock and link mounts for competition tuning * Savage body mounts to fit huge variety of Savage and monster truck bodyshells * Easily upgradeable electronics * Battery pack, charger and 8 AA batteries for transmitter not included * Wheelbase: 12 in. * Final Drive Ratio: 23.356:1 TECHNICAL SPECS: * LENGTH: 434mm (17.1in.) * WIDTH: 279mm (11in.) * HEIGHT: 267mm (10.5in.) * REQUIRES: (1) 7.2V Stick Pack Battery; (1) Timed or Peak Charger for Battery; (8) "AA" batteries for the transmitter. ACCESSORIES & EXTRAS: * Venom 7.2V Stick Pack Batteries * Megatech MegaPeak AC/DC Peak Charger * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI RACING BLITZ RTR w/MAXXIS ATTK-10 BODY

THEY'RE HERE!!! Proven HPI durability throughout The HPI Blitz uses nothing but the finest grade, high-impact nylon plastic on the most critical areas of the truck - from the bumpers to the super beefy arms and everything in between. HPI's industry known strength and durability makes the Blitz friendly for all - be it an R/C newcomer, or the skilled competitor. LENGTHENED CHASSIS The Blitz features an all-new main chassis based on the E-Firestorm - lengthened to deliver the most stable feel a short-course truck can offer. All metal gear transmission A bulletproof, brushless ready, full-metal gear transmision comes stock in the truck, and is made to handle all the power you can throw at it. Silicone oil is also pre-filed in the diff for an enjoyable, easy-to-drive experience. Firebolt 15T Motor The blistering Firebolt 15T Motor provides plenty of power - from speed runs to competing at your local track. Full ball bearings A complete set of rubber sealed ball bearings are included for super smooth drivetrain operation. 12mm Hex Hubs 12mm Hexes will keep your wheels secure under extreme power, and will keep them from stripping out. 12mm Hex Hubs are the short-course industry standard allowing you to customize your truck with a wide variety of aftermarket parts. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. FEATURES: * LENGTH: 548mm (21.6in.) * WIDTH: 296mm (11.6in.) * HEIGHT: 184 - 200mm (7.9 - 7.9In.) - adjustable * WHEELBASE: 329mm (12.9in.) - adjustable * REQUIRES: (1) 7.2V Stick Pack Battery; (1) Timed or Peak Charger for Battery; (8) "AA" batteries for the transmitter. ACCESSORIES & EXTRAS: * Venom 7.2V Stick Pack Batteries * Megatech MegaPeak AC/DC Peak Charger * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

HPI SAVAGE FLUX 2350 RTR w/GT-2 TRUCK BODY

NEW HPI Savage Flux 2350 Brushless Monster Truck The NEW HPI Savage FLUX 2350 continues the Savage legacy of monster truck domination with a truck that delivers massive power and performance, while going easy on your bank account. Based on the popular Savage FLUX HP, this version features our Alphastar 2350 Kv Motor and Q-Base ESC capable of running two, 2S LiPo packs (4S) in series. With 14.8v of raw brushless power, the FLUX 2350 will perform standing back flips with ease . . . just like its big brother, the FLUX HP. Stab the throttle at any time for extreme acceleration or high flying wheelies. Four oil-filled shocks with long travel suspension provide cushion for big jumps and reliable performance over rough Off-Road terrain. If you're looking for all-out, brushless, monster truck bashing fun, check out the Savage FLUX 2350 today! FEATURES: * Twin Battery Box Configuration * Big Bore Nylon Shocks * All Metal Gear Transmission * 2.5mm TVP Chassis Plates * Alphastar 2350Kv Brushless Motor * Q-base Brushless ESC * XL Tough Suspension * MACHINED BULLETPROOF DIFF GEARS * SUPER HEAVY-DUTY DOG BONES * MACHINED STEEL SPUR GEAR * SF-5 HIGH TORQUE METAL GEAR STEERING SERVO * SAVAGE WHEELIE BAR INCLUDED * ALL-TERRAIN TIRES * TF-3 TRANSMITTER * RTR - PERFORMANCE STRAIGHT FROM THE BOX! TECHNICAL SPECS: * LENGTH: (21in.)533mm * WIDTh: (16.8in.) 427mm * HEIGHT: (10in.) 254mm * WHEELBASE: (13.25in.) 336mm * REQUIRES: (8) "AA" alkaline batteries for transmitter; (2) 6-cell NiMh or 2S LiPo batteries; (1) Appropriate charger for batteries selected ACCESSORIES & EXTRAS: * Alkaline Batteries for Transmitter (8 needed) * 6-cell NiMh or 2S 25C LiPo batteries (2 needed) * Charger

HPI E-FIRESTORM 10T FLUX RTR TRUCK

This is HPI's first-ever brushless Motor equipped 2WD 1/10th scale stadium truck, the E-Firestorm FLUX! The E-Firestorm Flux takes the durable Electric Firestorm platform to the next level with amazing performance from no-maintenance brushless Motor technology. The all new Flux Brushless system includes a powerful Flux Warp brushless Motor that is controlled by the Flux Motiv Electronic Speed Control for maximum fun and insane top speeds! The E-Firestorm Flux is ready to go right out of the box with complete factory assembly, a pre-painted bodyshell, and glued tires! All you need is your own NiMH or LiPo Battery Pack and 8 AA Batteries for the radio, and experience the extreme power, fun and efficiency of brushless technology! The Warp 5700 is THE choice for nearly all 1/10th Scale Electric touring car, Buggy and trucks. You can go super-fast on the track and get those blazing speed runs with the same motor! With a standard 6-cell NiMH Battery Pack or 2S LiPo (7.4 volt) pack you can get up to 40mph with just the standard gearing! When geared correctly, the Warp 5700 is equivalent to a high quality 9-turn or 10-turn brushed Motor using 6 NiMH cells - a extremely powerful motor! FEATURES: * Flux Warp 5700Kv brushless Motor provides high performance, efficiency, long Motor life, reduced maintenance * Flux Motiv ESC for smooth and efficient Motor control * Composite Main Chassis is lightweight and durable * Suspension geometry and components from the Firestorm 10T * Nimble handling and easy to drive in all conditions * Adjustable wheelbase to tune the length of the truck to suit driving conditions * Adjustable rear toe and Anti-squat for quick adjustment to fine tune handling * Many existing Firestorm option parts bolt directly on to maximize performance * Vertically adjustable front and rear Camber links are easily adjustable to suit conditions and driving styles * Adjustable shock positions (3 upper and 2 lower) to maximize suspension performance * High quality thumbscrews on battery retainer for secure and tool-free battery access. Fits most Li-Po packs, 6-cell NiMh batteries, and even 7-cell NiMh batteries * Dual pad slipper clutch protects the drive train on hard landings * Durable low-profile 2.6:1 ratio ALL METAL Gear transmission is extremely durable and capable of handling very powerful motors * Sealed planetary Gear Differential for nearly zero maintenance, maximum reliability and convenience of tuning Differential action with heavy weight silicone oils * Strong alloy steel dog bones for simplicity and durability * 14 ball bearings throughout the drive train for maximum speed and efficiency * Steel turnbuckles for each Camber link and steering rod allow fine adjustment of the suspension to suit your driving style and track conditions * Threaded shock bodies allow fine adjustment of ride height * Silicone oil filled shocks for high performance and more consistent Damping in extreme temperatures * Aluminum 12mm wheel hex adapters used front and rear are compatible with all HPI 1/10th Scale truck rear wheels. Allows many different wheel and tire combinations to adapt to driving conditions and numerous styling options * Alloy steel front axles are extremely durable * Captured Hinge Pin design used throughout - easy maintenance with no E-clips * Lay down steering Servo for the lowest possible center of gravity * High quality hex head machine screws used throughout for simple maintenance * Adjustable height Body mounts allow a variety of Body styles to fit the Chassis for a custom look * Ground Assault taper pin rear tires and Front Line ribbed front tires for high traction and long life on nearly any surface * Shiny chrome "Scorch" wheels made from high impact Nylon for extreme durabilty * 48 Pitch pinion and spur Gear for maximum efficiency and reliability, protected by a molded Gear cover to keep debris away from the gears * Pre-painted DSX-2 Body with custom graphics to complement your style The Warp 5700 features: * Powerful, high-speed brushless motor * Excellent pairing of huge power and extraordinary efficiency * Same size as standard 540-size motor * Sleek black-anodized Aluminum casing * Zero maintenance design * External solder tabs for easy wire replacement * Oversized precision ball bearings for long life * High Torque/ High Temperature Neodymium rotor * Slotless stator design delivers smooth, linear torque * Easy 4-point mounting for convenient installation * Longer run times than a comparable brushed motor * Easily rebuildable with bearings and rotor being user-replaceable * Compatible with any sensorless ESC The Flux Motiv speed controller features: * Up to 7 NiMH Cell (8.4v) or 2S LiPo compatability * LiPo programmable low-voltage cutoff** * High performance cross-cut Aluminum heat sink * Proportional Braking for great control off-power * Huge amount of continuous power handling (70A* Continuous / 380A burst current) * Smooth startup and run with sensorless motors (Patents Pending) * Reversing speedo with programmable reverse lock-out for racing * Small size: 46 x 36 x 23mm (1.8"L x 1.4"W x 0.9"H) * Extremely light weight: 62.4 g (2.2 oz) * Authentic Dean's battery plug for a secure zero-loss connection * Durable on/off switch * Simple initial programming * Ability to easily adjust speedo parameters with HPI link cable (not supplied) * REQUIRES: o "AA" Alkaline Batteries for Transmitter (8 needed) o 6 or 7-Cell NiMh Battery with Deans Ultra Connector o 2-Cell (7.4V) LiPo Battery with Deans Ultra Connector o Appropriate Charger for Battery ACCESSORIES & EXTRAS: * "AA" Alkaline Batteries for Transmitter (8 needed) * 6 or 7-Cell NiMh Battery with Deans Ultra Female Connector * 2-Cell (7.4V) LiPo Battery with Deans Ultra Female Connector * Appropriate Charger for Battery Click picture to enlarge

HPI RACING BLITZ ESE 2WD SCT KIT w/ATTK-10 BODY

JUST ARRIVED!!! THE HPI RACING BLITZ ESE TAKES SHORT-COURSE R/C TO THE NEXT LEVEL WITH AN ALL OUT, NO COMPROMISE CHASSIS THAT'S OUTFITTED WITH A TON OF PREMIUM UPGRADES, HIGH GRADE MATERIALS AND TUNED PERFORMANCE PARTS . THIS HPI RACING BLITZ ESE IS A BUILD-IT-YOURSELF KIT ALLOWING YOU TO CUSTOMIZE YOUR TRUCK AND TOP IT OFF WITH YOUR CHOICE OF ELECTRONICS, HIGH PERFORMANCE WHEELS, TIRES, BATTERIES, ACCESSORIES AND MORE. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. BLITZ ESE FEATURES AND BENEFITS: > High performance parts are color coded white, cool gray, and warm grey. Not only does this enhance the style of the truck, it lets you know at a glance which part is the high response performance part. > Stiffer composite main chassis that quickens the overall response of the truck. > Firm front arms give more precise steering feel while the rear arms help free up the truck in corners. > Firm shock towers provide less flex, allowing the shocks to do more of the work. Much more responsive to oil and spring changes. > Firmer skid plates: jump take-offs and landings are more aggressive. Less compliance means sharper response. > Firmer bumpers offer more body protection. > Composite front bulkhead: keeps the front end more rigid, allowing for a more precise and responsive front suspension. > Aluminum front arm mount: much more precise front suspension action. Set screws keep the aluminum from wearing and also take full advantage of the firm front arms. > Aluminum shock bodies provide more precise action for improved chassis response. > Aluminum shock top caps provide more precision and response. They also have enhanced bleeding function when building shocks. > Aluminum cartridge cap allows a delrin washer to be added between o-rings to reduce shaft deflection and friction. > Pre-load lock collars allows locking of collars so preload adjustments don't change. Blitz-ESE-chassis > Firm suspension mounts: more precise alignment of suspension helps make adjustment more noticeable. Parts develop less play over time and take full advantage of the firm rear arms. > Ball differential: ceramic diff balls mated to a ball race and a steel gear ensuring you get great ball diff action without compromising the strength of the all-metal drivetrain. High quality outdrives ensure long part life. The diff is easily adjusted with a 2.5mm driver so you can tune the feel to your driving style. The diff also shaves 20g of rotating weight from the gearbox. > Universal drive shafts free up the drivetrain and allow more extreme suspension settings. > Trailing vs. Inline: both types of steering blocks are included to help you tailor your truck to your driving style and performance requirements. > Heat sink motor mount offers a more rigid mounting of the drivetrain to the motor and has improved cooling potential so you can run those hotter winds even faster. > Lightweight slipper/ spur carriers decrease rotating weight in the gearbox and simplify installation. > Titanium top shaft: the input shaft to the gearbox is now titanium to further reduce rotating weight and make the most of the powerplant. > Aluminum locknuts are used throughout the chassis to lighten the chassis, especially in un-sprung assemblies making the chassis more responsive. > 7075 aluminum ball studs further increase responsiveness of the entire suspension and steering systems and remove weight. > Titanium turnbuckles greatly decrease the weight of the suspension and add style to your linkages. > CNC serrated aluminum, large diameter wheel nuts used at each corner allow the fastest maintenance and offers the most wheel holding torque to prevent wheels from loosening. > High impact firm ball cups: more suspension precision and more driver feedback. > High quality class 10.9 and class 12.9 hardware used throughout for ease of maintenance and durability. LEARN MORE HERE: http://www.hpiracing.com/kitinfo/104558/ FEATURES: * LENGTH: 548mm (21.6in.) * WIDTH: 296mm (11.6in.) * HEIGHT: 184 - 200mm (7.9 - 7.9In.) - adjustable * WHEELBASE: 329mm (12.9in.) - adjustable * REQUIRES: o Transmitter o Receiver o Steering Servo o ESC o Motor o 7.2V Battery o Timed or Peak Charger for Battery o SCT Wheels o SCT Tires and Inserts o Paint for Polycarbonate Body o CA Glue ACCESSORIES & EXTRAS (select at right): o Venom 7.2V Batteries o Megatech MegaPeak AC/DC Peak Charger o Alkaline Batteries for Transmitter Click picture to enlarge

HPI RACING BLITZ RTR w/ART SERIES ATTK-10 BODY

Now in Stock!!! The HPI Blitz uses nothing but the finest grade, high-impact nylon plastic on the most critical areas of the truck - from the bumpers to the super beefy arms and everything in between. HPI's industry known strength and durability makes the Blitz friendly for all - be it an R/C newcomer, or the skilled competitor. Proven HPI durability throughout. LENGTHENED CHASSIS The Blitz features an all-new chassis based on the E-Firestorm - lengthened to deliver the most stable feel a short-course truck can offer. All metal gear transmission A bulletproof, brushless ready, full-metal gear transmision comes stock in the truck, and is made to handle all the power you can throw at it. Silicone oil is also pre-filed in the diff for an enjoyable, easy-to-drive experience. Firebolt 15T Motor The blistering Firebolt 15T Motor provides plenty of power - from speed runs to competing at your local track. Full ball bearings A complete set of rubber sealed ball bearings are included for super smooth drivetrain operation. 12mm Hex Hubs 12mm Hexes will keep your wheels secure under extreme power, and will keep them from stripping out. 12mm Hex Hubs are the short-course industry standard allowing you to customize your truck with a wide variety of aftermarket parts. FEATURES: * WHEELBASE: 329mm (12.9in.) - adjustable * LENGTH: 548mm (21.6in.) * WIDTH: 296mm (11.6in.) * HEIGHT: 184 - 200mm (7.9 - 7.9In.) - adjustable * REQUIRES: (1) 7.2V Stick Pack Battery; (1) Timed or Peak Charger for Battery; (8) "AA" batteries for the transmitter. ACCESSORIES & EXTRAS: * Venom 7.2V Stick Pack Batteries * Megatech MegaPeak AC/DC Peak Charger * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

Redcat Racing Vortex EPX 1/10 Scale Electric Desert Truck

The Vortex EPX is an electrifying four-wheel drive desert truck that is ready to run right out of the box! Get started in this exciting hobby with this bold RC vehicle, complete with an electric brushed 27T 540 motor, forward/reverse transmission, four wheel drive, high torque servo and a two channel AM radio. Equipped with an aggressively styled polycarbonate body scheme, huge soft compound RC off road tread, aluminum capped oil filled shocks, battery and charger, this vehicle is a mini eruption of enjoyment for any level RC enthusiast. Add 8 AA batteries to the remote and you are ready to conquer the toughest terrain! Specifications: Motor Type Electric Brushed 27T 540 Transmission Forward & Reverse Drive System 4 Wheel Drive Length 460mm Width 250mm Height 160mm Wheelbase 275mm Ground Clearance 26mm Fuel Tank Capacity Chassis Type Plastic Brake Type Shocks Aluminum Capped Oil Filled Speed Control Battery Radio System 2 Channel AM

Redcat Racing Volcano EPX PRO 1/10 Scale Electric Brushless Monster Truck

Volcano EPX PRO 1/10 Scale Electric Brushless Monster Truck The Volcano EXP PRO is an electrifying four-wheel drive monster truck that is ready to run right out of the box! Get started in this exciting hobby with this bold RC vehicle, complete with an electric brushless 540 motor, forward/reverse transmission, four wheel drive, high torque servo and a two channel AM radio. Equipped with an aggressively styled polycarbonate body scheme, huge soft compound RC off road tread, aluminum body oil filled shocks, battery and charger, this vehicle is a mini eruption of enjoyment for any level RC enthusiast. Add 8 AA batteries to the remote and you are ready to conquer the toughest terrain! Specifications: Motor Type Electric Brushless 3300KV 540 Novatech Transmission Forward & Reverse Drive System 4 Wheel Drive Length 400mm Width 310mm Height 185mm Wheelbase 275mm (F/R) Ground Clearance 30mm Fuel Tank Capacity Chassis Type Plastic Brake Type Shocks Aluminum Capped Oil Filled Speed Control Bushless ESC (2s LIPO Ready) Battery Radio System 2 Channel AM Click picture to enlarge

Redcat Racing Volcano EPX 1/10 Scale Electric Monster Truck

The Volcano EXP is an electrifying four-wheel drive monster truck that is ready to run right out of the box! Get started in this exciting hobby with this bold RC vehicle, complete with an electric brushed 27T 540 motor, forward/reverse transmission, four wheel drive, high torque servo and a two channel AM radio. Equipped with an aggressively styled polycarbonate body scheme, huge soft compound RC off road tread, aluminum capped oil filled shocks, battery and charger, this vehicle is a mini eruption of enjoyment for any level RC enthusiast. Add 8 AA batteries to the remote and you are ready to conquer the toughest Specifications: Motor Type Electric Brushed 27T 540 Transmission Forward & Reverse Drive System 4 Wheel Drive Length 400mm Width 310mm Height 185mm Wheelbase 275mm (F/R) Ground Clearance 30mm Fuel Tank Capacity Chassis Type Plastic Brake Type Shocks Aluminum Capped Oil Filled Speed Control Battery Radio System 2 Channel AM

Redcat Racing Tornado EPX PRO 1/10 Scale Brushless Buggy

Leave your competition in a whirlwind of dust with the exciting Tornado EPX PRO. This cyclone of muscle is equipped with a speed regulator and brushless motor making it easy to operate and control either on or off the track. This bold RC buggy comes complete with an electric brushless 3300KV 540 Novatech motor, four wheel drive, forward/reverse transmission and a two channel AM radio. The Tornado EPX PRO is fully equipped with soft compound knobby off road tires, vivid polycarbonate body, aluminum capped oil filled shocks, Speed Control , Brushless ESC (2s LIPO Ready), 7.2v 2000Mah NiMh battery and charger are included. Running at speeds similar to nitro vehicles, this buggy is ready to go right out of the box. Just add 8 AA batteries to the remote and you are ready to kick up your own funnel clouds! Specifications: Motor Type Electric Brushless 3300KV 540 Novatech Transmission Forward and Reverse Drive System 4 Wheel Drive Length 400mm Width 250mm Height 160mm Wheelbase 275mm (F/R) Ground Clearance 26mm Chassis Type Plastic Brake Type Motor Shocks Aluminum Body Oil Filled Speed Control Brushless ESC (2s LIPO Ready) Battery 7.2v 2000Mah NiMh Battery Pack Radio System 2 Channel AM Click picture to enlarge

Redcat Racing The Ground Pounder

We're proud to introduce the first 1:10th scale solid-axle RTR monster truck to hit the R/C market, the Ground Pounder! Developed, prototyped, and tested by Crawford Performance Engineering, the Ground Pounder comes packed with features commonly found only on fully customized trucks. Designed to bring out the kid in all of us, the Ground Pounder features shaft-driven 4 wheel drive and 4 wheel steering, yes 4 wheel steering! Plus a fully anodized aluminum "tube style" frame. Add to it the fact that most standard 1:10th scale truck bodies are a direct fit, and you can customize your truck to look just like the real thing! With it's oversize monster tires, it's at home whether tearing up the backyard or pounding the competition. also included 7.2V 6 Cell Battery with Charger & 3 Channel FM Digital Radio System. Specifications: Motor Type Powerful Brushed 540 Motor/ESC Combo Included Transmission Drive System 4 Wheel Drive Length 457.2mm (18") Width 336.5mm (13 1/4") Height 260.4mm (10 1/4") Wheelbase 317.5mm (12 1/2") Ground Clearance Adjustable from 2" to 3" Chassis Type Anodized 6061 Aluminum "tube"style Chassis & Suspension Links Brake Type Motor Shocks Aluminum Threaded Oil-Filled Shocks Speed Control Battery 7.2V 6 Cell Battery with Charger Radio System 3 Channel FM Digital Click picture to enlarge

Redcat Racing BackDraft 8E 1/8 Scale Brushless Electric Buggy

You will have the best weekend ever with the BackDraft 8E from Redcat Racing! This 1/8 scale brushless electric buggy includes 2- 7.4V LIPO batteries, (20c 3200Mah 2s) & Charger. Also included is a Redcat DSM-2C 2.4GHz Remote & Receiver Radio System. Everything you need at a price that is hard to beat. Specifications: Motor Type Electric Brushless 8T 2400RPM 540 Transmission Drive System 4 WD Length 490mm Width 305mm Height 190mm Wheelbase 325mm F/R Ground Clearance 30mm Fuel Tank Capacity Chassis Type 3.0mm 6061 Aluminum Brake Type Motor Shocks Oil filled Big Bore Shocks Speed Control Brushless ESC EZRUN-80A Battery Dual LIPO 7.4V Batteries (20c 3200Mah 2s) & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

Redcat Racing Caldera 10E 1/10 Scale Brushless Truck

The NEW Caldera 10E brushless monster truck is an electrifying four-wheel drive monster that is ready to run right out of the box! The Caldera 10E is larger than the Volcano EP Pro and it also includes some features not found on other Redcat 1/10 Scale Electric Vehicles. So get out and go bashing this weekend! Specifications: Motor Type Electric Brushless 3750KV RC-540 Transmission Forward and Reverse Drive System 4 Wheel Drive Length 410mm Width 320mm Height 165mm Wheelbase 305mm Ground Clearance 25mm Chassis Type Brake Type Motor Shocks Big Bore Shocks Speed Control Brushless ESC (2s LIPO Ready) Battery 7.2v 3800Mah NiMh Battery Pack Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

Redcat Racing Aftershock 8E 1/8 Scale Brushless Electric Desert Truck

Liven up your weekend adventures with this incredible basher from Redcat Racing, the Aftershock 8E! This 1/8 scale brushless desert truck will thrill you with its extreme power! This package includes 2 LIPO batteries, 7.4V Batteries (20c 3200Mah 2s) , LIPO battery charger and everything else you need at a price that is hard to beat. Also included is a DSM-2C 2.4GHz Remote & Receiver! You cant go wrong with this one. Specifications: Motor Type Electric Brushless 8T 2400RPM 540 Transmission single drive, forward, reverse. Drive System 4 WD Length 510mm Width 380mm Height 250mm Wheelbase 325mm F/R Ground Clearance 58mm Chassis Type 3.0mm T6061 Aluminum Brake Type Motor Shocks Oil filled Big Bore Shocks Speed Control Brushless ESC EZRUN-80A Battery Dual LIPO 7.4V Batteries (20c 3200Mah 2s) & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver

Redcat Racing Earthquake 8E 1/8 Scale Brushless Electric Monster Truck

Wheelies on Demand with this incredible truck! Liven up your weekend bashing adventures with the Earthquake 8E from Redcat Racing! This 1/8 scale brushless electric monster truck includes 2- 7.4V LIPO batteries, (20c 3200Mah 2s) & Charger. Also included is a Redcat DSM-2C 2.4GHz Remote & Receiver Radio System. Everything you need at a price that is hard to beat. You will have the best weekend ever with the Earthquake 8E from Redcat Racing! Specifications: Motor Type Electric Brushless 8T 2400RPM 540 Transmission Drive System 4 Wheel Drive Length 510mm Width 380mm Height 250mm Wheelbase 325mm F/R Ground Clearance 58mm Chassis Type 3.0mm 6061 Aluminum Brake Type Motor Shocks Oil filled Big Bore Shocks Speed Control Brushless ESC EZRUN-80A Battery Dual LIPO 7.4V Batteries (20c 3200Mah 2s) & Charger Included Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

ALIGN T-REX 450 PRO SUPER COMBO

T-Rex 450 Super Combo Includes Everything Except Radio System, Pitch Guage & LiPo Battery Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies. FEATURES: * Newly designed head block with high rigidity and stability. * Single piece integrated design of main bearing block and servo mount. * Single piece integrated design of anti-rotation guide and gyro mount. * Single piece integrated landing gear. * Highly stable flybar control system. * High precision bearing mixing arms. * Newly designed high resolution swashplate. * Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane. * Highly rigid frame with single piece carbon side and bottom plates. * Highly efficient shaft driven tail design. * Weighted tail rotor blade grips to repel centripetal forces. * Straight-up in-frame rudder servo mount for improved geometry. * Newly designed aerodynamic canopy. * Newly designed high torque motor. * Newly designed high strength main blade grips. INCLUDES: * T-REX 450 Kit Set * 325 Carbon Blades (1 set) * RCE-BL35X 35A Brushless ESC * 450M Brushless motor (3500KV) * GP750 Head Lock Gyro (1) * DS520 Digital servo (1) * DS410M Metal Gear Digital Servo (3) TECHNICAL SPECS: * Length: 635mm * Height: 230mm * Main Rotor Diameter: 710mm * Tail Rotor Diameter: 158mm * Main Drive Gear: 150T * Tail Drive Gear: 25T * Autorotation Tail Drive Gear: 106T * Motor Drive Gear: 13T * Drive Gear Ratio: 1:11.5:4.24 * Weight(w/o power system): 450g * Flying Weight: Approx 780g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 11.1V 3S Li-Po 2000-2200mAh battery Click picture to enlarge

ALIGN T-REX 450 PRO KIT

T-Rex 450 Kit Includes Everything Except Radio System, Pitch Guage, Gyro, Servos & LiPo Battery Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies. FEATURES: * Newly designed head block with high rigidity and stability. * Single piece integrated design of main bearing block and servo mount. * Single piece integrated design of anti-rotation guide and gyro mount. * Single piece integrated landing gear. * Highly stable flybar control system. * High precision bearing mixing arms. * Newly designed high resolution swashplate. * Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane. * Highly rigid frame with single piece carbon side and bottom plates. * Highly efficient shaft driven tail design. * Weighted tail rotor blade grips to repel centripetal forces. * Straight-up in-frame rudder servo mount for improved geometry. * Newly designed aerodynamic canopy. * Newly designed high torque motor. * Newly designed high strength main blade grips. INCLUDES: * T-REX 450 Kit Set * 325 Carbon Blades (1 set) * RCE-BL35X 35A Brushless ESC * 450M Brushless motor (3500KV) TECHNICAL SPECS: * Length: 635mm * Height: 230mm * Main Rotor Diameter: 710mm * Tail Rotor Diameter: 158mm * Main Drive Gear: 150T * Tail Drive Gear: 25T * Autorotation Tail Drive Gear: 106T * Motor Drive Gear: 13T * Drive Gear Ratio: 1:11.5:4.24 * Weight(w/o power system): 450g * Flying Weight: Approx 780g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o Head lock gyro (1) o Specialized servo (1) o CCPM servo (3) o 11.1V 3S Li-Po 2000-2200mAh battery Click picture to enlarge

ALIGN T-REX 450 SPORT SUPER COMBO

Super Combo Includes Everything Except Radio System, Pitch Guage & LiPo Battery Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies. FEATURES: * Newly designed wider main blade grips that increase the overall main blade disc diameter, resulting in dramatically increased stability and agility. * Thicker main blade grip arms to increase durability and crash survivability. * Expanded flybar supporting point design on control cage, increasing the rigidity of fly bar, resulting in improved flight stability. * High precision bearing mixing arms for smooth and precise operations. * Newly designed servo screw retainer to simplify servo installation process. * Newly designed frame structure blocks and motor mount to simplify assembly, yet dramatically increase the overall frame rigidity, resulting in improved 3D performance. * Improved battery mount for increased battery mounting rigidity, eliminating flight instability caused by movement of battery. * Improved gyro mounting platform to avoid degrading locking performance as result of tail boom vibration. * Tail boom support rods have been lengthened to suppress tail boom vibrations; integrated ends design improves durability and crash survivability. * Tail control arm base is integrated with tail gearbox to improve control precision, and simplify maintenance. * Newly designed high rigidity anti-rotation guide for improved operation precision. INCLUDES: * T-REX 450 Sport Kit Set * 325 Carbon Blades (1 set) * RCE-BL35X 35A Brushless ESC * 450M Brushless motor (3500KV) * GP750 Head Lock Gyro (1) * DS420 Digital servo (1) * DS410M Metal Gear Digital Servo (3) TECHNICAL SPECS: * Length: 643mm * Height: 228mm * Main Rotor Diameter: 715mm * Tail Rotor Diameter: 158mm * Main Drive Gear: 150T * Tail Drive Gear: 25T * Autorotation Tail Drive Gear: 106T * Motor Drive Gear: 134T * Drive Gear Ratio: 1:10.7:4.24 * Weight(w/o power system): 445g * Flying Weight: Approx 770g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 11.1V 3S Li-Po 2000-2200mAh battery Click picture to enlarge

ALIGN T-REX 450 SPORT KIT

T-Rex 450 Kit Includes Everything Except Radio System, Gyro, Servos, Pitch Guage & LiPo Battery. Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies. FEATURES: * Newly designed wider main blade grips that increase the overall main blade disc diameter, resulting in dramatically increased stability and agility. * Thicker main blade grip arms to increase durability and crash survivability. * Expanded flybar supporting point design on control cage, increasing the rigidity of fly bar, resulting in improved flight stability. * High precision bearing mixing arms for smooth and precise operations. * Newly designed servo screw retainer to simplify servo installation process. * Newly designed frame structure blocks and motor mount to simplify assembly, yet dramatically increase the overall frame rigidity, resulting in improved 3D performance. * Improved battery mount for increased battery mounting rigidity, eliminating flight instability caused by movement of battery. * Improved gyro mounting platform to avoid degrading locking performance as result of tail boom vibration. * Tail boom support rods have been lengthened to suppress tail boom vibrations; integrated ends design improves durability and crash survivability. * Tail control arm base is integrated with tail gearbox to improve control precision, and simplify maintenance. * Newly designed high rigidity anti-rotation guide for improved operation precision. INCLUDES: * T-REX 450 Sport Kit Set * 325 Carbon Blades (1 set) * RCE-BL35X 35A Brushless ESC * 450M Brushless motor (3500KV) TECHNICAL SPECS: * Length: 643mm * Height: 228mm * Main Rotor Diameter: 715mm * Tail Rotor Diameter: 158mm * Main Drive Gear: 150T * Tail Drive Gear: 25T * Autorotation Tail Drive Gear: 106T * Motor Drive Gear: 134T * Drive Gear Ratio: 1:10.7:4.24 * Weight(w/o power system): 445g * Flying Weight: Approx 770g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 11.1V 3S Li-Po 2000-2200mAh battery o Head lock gyro (1) o Specialized servo (1) o CCPM servo (3) Click picture to enlarge

ALIGN T-REX 500 ESP 3G FLYBARLESS

500ESP 3G Combo Includes Everything Below. All You Need is a Radio System, Pitch Guage & LiPo Battery FEATURES: * Electric power system. * Simple and light weight design provides awesome flight performance and extreme 3D capability. * Rigid carbon fiber frame design. * Beautiful factory painted fiberglass canopy. * Rotor head/tail with thrust bearings. * Direct-to-swash CCPM linkage. * Center of gravity of battery tray designed close to the rotor head. * High efficiency torque tube drive system. * Fully driven tail auto rotation system. * Tail servo boom mount. Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies. 3G Programmable Flybarless System Features: * 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance. * Utilizes Silicon Micro Machine (SMM) sensors for excellent stability. * 12 bit processors providing ultra high resolution, resulting in highly precise controls * Software upgradable through PC interface adapter (sold eparately) * Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve. * Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. * Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system. * Suitable for all CCPM and mechanical mixing system. * Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700. * Innovative Pitch Gau as an aid to facilitate pitch adjustments. * High frame rate signal output for faster and higher precision servo response. * Capable to operate between 3V to 8.4V, compatible with high voltage servos. * Small footprint, light weight, minimalists and reliable design. * Suitable Voltage Range: DC 3~8.4V * Current Comsumption: <80mA @ 4.8V> * Flip and Roll rate detection speed: }300degrees/sec * Rudder rate detection speed:}500degrees/sec * Sensor resolution: 12bit * Operating temperature: -20~65 * Operating humidity: 0%~95% * RoHS certified * Dimensions - Control box: 42x26.5x14.5mm; Sensor: 22.3x21.7x14mm * Weight - Control box: 16g; Sensor:9g INCLUDES: * T-REX 500 ESP 3G Kit Set * 425D carbon fiber blades * RCE-BL60G 60A Brushless ESC (Built-in 5-6V step-less adjustable BEC) * 500M Brushless motor * Motor pinion gear 13T * DS510 Digital Servo (1) * DS520 Digital Servo (3) * 3G Programmable Flybarless System TECHNICAL SPECS: * Length: 840mm * Height: 310mm * Main Blade Length: 425mm * Main Rotor Diameter: 970mm * Tail Rotor Diameter: 200mm * Motor Ponion Gear: 13T * Main Drive Gear: 162T * Autorotation Tail Drive Gear: 145T * Tail Drive Gear: 31T * Drive Gear Ratio: 1:12.46:4.68 * Weight(w/o power system): 910g * Flying Weight: Approx 1700g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 22.2V 6S Li-Po 2100-2500mAh battery Click picture to enlarge

ALIGN T-REX 500 ESP SUPERIOR COMBO

500ESP Superior Combo Includes Everything Below. All You Need is a Radio System, Pitch Guage & LiPo Battery FEATURES: * Electric power system. * Simple and light weight design provides awesome flight performance and extreme 3D capability. * Rigid carbon fiber frame design. * Beautiful factory painted fiberglass canopy. * Rotor head/tail with thrust bearings. * Direct-to-swash CCPM linkage. * Center of gravity of Battery tray designed close to the rotor head. * High efficiency torque tube drive system. * Fully driven tail auto rotation system. * Tail servo boom mount. Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies INCLUDES: * T-REX 500 ESP Kit Set * 425D carbon fiber blades * RCE-BL60G 60A Brushless ESC (Built-in 5-6V step-less adjustable BEC) * 500M Brushless motor * Motor ponion gear 13T * DS510 Digital Servo * DS520 Digital Servo * GP780 Head lock gyro TECHNICAL SPECS: * Length: 840mm * Height: 310mm * Main Blade Length: 425mm * Main Rotor Diameter: 970mm * Tail Rotor Diameter: 200mm * Motor Pinion Gear: 13T * Main Drive Gear: 162T * Autorotation Tail Drive Gear: 145T * Tail Drive Gear: 31T * Drive Gear Ratio: 1:12.46:4.68 * Weight(w/o power system): 1020g * Flying Weight: Approx 1700g * REQUIRES: o Transmitter (6-channel or more, helicopter system) o Receiver (6-channel or more) o Pitch gauge o 22.2V 6S Li-Po 2100-2500mAh battery

ALIGN T-REX 550E 3G FLYBARLESS COMBO

550E 3G Combo Includes Everything Below. All You Need is a 7-Ch Radio System, Pitch Guage & 6S LiPo Battery FEATURES: * Newly designed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision. * New lightweight high precision main gear, with excellent balance and stability. * New lightweight metal main gear hub. * New lightweight rigid metal main shaft bearing blocks. * Integrated swash anti-rotation guide and gyro mounting platform. * Convenient carbon fiber ESC mount for installation either on top of tail boom mount for maximum cooling from main blades, or under rudder servo for maximum flexibility. * Dual section battery mount for optimal CG position based on battery weight. * 3K carbon fiber side frame and base plate, simple yet highly rigid for ease of maintenance. * 600 helicopter grade ø21.5mm diameter tail boom providing superior rigidity and stability. * Newly designed rear mounted rudder servo mount, for pleasing aesthetic as well as improving side frame strength and protection to the rudder servo. * High speed rated thrust bearings in tail blade grips. * High efficiency torque tube drive. * High strength carbon fiber used on tail fins and tail boom supports. * New lightweight landing gears. * High grade airbrushed fiberglass canopy. Helicopters are loads of fun and perfect for year-round radio control enjoyment. Get your remote control helicopters, accessories, and parts now at Full Throttle Hobbies INSTRUCTION (3G Programmable Flybarless System): * 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance. * Utilizes Silicon Micro Machine (SMM) sensors for excellent stability. * 12 bit processors providing ultra high resolution, resulting in highly precise controls * Software upgradable through PC interface adapter (sold eparately) * Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve. * Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. * Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system. * Suitable for all CCPM and mechanical mixing system. * Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700. * Innovative Pitch Gau as an aid to facilitate pitch adjustments. * High frame rate signal output for faster and higher precision servo response. * Capable to operate between 3V to 8.4V, compatible with high voltage servos. * Small footprint, light weight, minimalists and reliable design. INCLUDES: * T-REX 550E 3G Kit * Aluminum Tail Boom * RCE-BL70G Brushless ESC * 520 Carbon fiber blades * DS610 Digital Servo (3) * DS620 Digital Servo (1) * Flybarless System * 600M Brushless motor * 90mm 3K Carbon Fiber Tail Blades TECHNICAL SPECS: * Length: 1042mm * Height: 364mm * Main Blade Length: 520mm * Main Rotor Diameter: 1188mm * Tail Rotor: 254mm * Motor Drive Gear: 16T * Main Drive Gear: 170T * Autorotation Tail Drive Gear: 180T * Tail Drive Gear: 40T * Drive Gear Ratio: 1:10.62:4.5 * Weight (w/o main blade): 1800g * Flying Weight: Approx 2800g * REQUIRES: o Transmitter (7-channel or more, helicopter system) o Receiver (7-channel or more) o Pitch gauge o 22.2V 6S Li-Po battery 2600 - 5200mAh

ALIGN T-REX 700E 3G FLYBARLESS COMBO

700E 3G Flybarless Combo Includes Everything Below. All You Need is a 7-Ch Radio System, 80A ESC w/BEC, Pitch Guage & (2) 6S LiPo Batteries FEATURES: * New lateral adjustable metal left/right control bellcrank arms and elevator control arms, enabling the most ideal endpoint travel adjustment for 3G flybarless as well as flybar system, while increasing servo resolution for improved control precision. * All metal, highly precise main blade control system, with excellent durability and superior control precision. * Design concept based on large competition helicopters, for excellent static and dynamic performance. * Innovative sliding battery tray rails imbedded into the 3K side frames, allowing for quick battery access as well as battery protection. In addition, the system improves the overall rigidity of side frames, as the same time raising the center of gravity. * Top mounted motor base making the motors center of gravity much more accurate, improving 3D agility and allowing blade drafts to cool the motor effectively. * Utilizing module 1 gear pitch for improved power sustainability of main gear. * Uniquely designed fixed motor mount with 3 bearing support blocks, providing absolute support for motor shaft, dramatically reducing gear mesh variance as result of instantaneous torque. In addition, this system strengthen the lack of support on high power outrunner motors, eliminating gear stripping issues, while increasing motor power transfer efficiency and main gear longevity. * Easy access top mounted ESC platform to take advantage of main blades airflow for effective cooling. * New lightweight H-shaped electric devices retention system for protection, as well as ergonomically correct design to simplify operation. * High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to simplify installation. * Wide +/- 15 degree pitch range for superior 3D performance and explosive power. * CNC twice-machined gear for superior balance and stability. * High speed rated thrust bearings incorporated into tail blade grips. * Utilizes high efficiency tail drive shaft system and high strength 3K carbon fiber tail boom. * Highly rigid 3K carbon fiber side frames for simple maintenance. * Tail blades, tail boom, and tail boom supports are all made from high strength carbon fiber material. * High torque rated one way bearing base. * New lightweight landing gears. INSTRUCTION (3G Programmable Flybarless System): * 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance. * Utilizes Silicon Micro Machine (SMM) sensors for excellent stability. * 12 bit processors providing ultra high resolution, resulting in highly precise controls * Software upgradable through PC interface adapter (sold eparately) * Simple setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve. * Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. * Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system. * Suitable for all CCPM and mechanical mixing system. * Comaptable with helicopter of all sizes from T-Rex 250 to T-Rex 700. * Innovative Pitch Gau as an aid to facilitate pitch adjustments. * High frame rate signal output for faster and higher precision servo response. * Capable to operate between 3V to 8.4V, compatible with high voltage servos. * Small footprint, light weight, minimalists and reliable design. INCLUDES: * T-REX 700E 3G Kit * Aluminum Tail Boom * 3K Carbon Fiber Tail Boom * 690D Carbon fiber blades * DS610 Digital Servo (3) * DS650 Digital Servo (1) * Flybarless System * 700M Brushless motor * 105mm 3K Carbon Fiber Tail Blades TECHNICAL SPECS: * Length: 1328mm * Height: 408mm * Main Blade Length: 690mm * Main Rotor Diameter: 1562mm * Tail Rotor: 281mm * Motor Drive Gear: 12T * Main Drive Gear: 115T * Autorotation Tail Drive Gear: 104T * Tail Drive Gear: 24T * Drive Gear Ratio: 1:9.58:4.33 * Weight (w/o main blade): 2830g * Flying Weight: Approx 4700g * REQUIRES: o Transmitter (7-channel or more, helicopter system) o Receiver (7-channel or more) o ESC (12S Li-Po 80A or more) o 5A and higher external BEC(uses when ESC doesn have BEC build in) o Pitch gauge o 22.2V 6S Li-Po battery 4500 - 5200mAh (2 needed)

Redcat Racing Hurricane XTR 1/8 Scale Nitro Buggy

Create your own world of disaster with the new Redcat Racing Hurricane XTR! This powerful buggy boasts three sealed gear differentials, impressive SH M 28 P3 big block engine, pre-painted polycarbonate body, full electronics including a metal-gear servo, polished aluminum SH tuned pipe, pivot ball suspension (PBS) and a steel spur gear; all at a price that is hard to beat. The anodized 3mm thick chassis is fully countersunk, and the wheel hubs are coated to match for durability. A durable suspension combined with a high torque steering servo, tough servo saver, and a the new Redcat DSM-2C 2.4GHz radio system keep this overpowered beast tracking straight through the roughest terrain while the massive oil-filled shocks keep your tread firmly on the ground. Cars and Trucks are loads of fun and perfect for year-round radio control enjoyment. Get your remote control cars and trucks, accessories, and parts now at Full Throttle Hobbies. Specifications: Motor Type Nitro 4.57cc .28 SH Transmission Single Speed Drive System 4 Wheel Drive Length 490mm Width 305mm Height 190mm Wheelbase 320-325mm Ground Clearance 30mm Fuel Tank Capacity 125cc Chassis Type Aluminum 6061 / T6 Brake Type Composite Disc Shocks Aluminum Body Oil Filled Speed Control Battery Radio System Redcat DSM-2C 2.4GHz Remote & Receiver Click picture to enlarge

VENOM WAVE JUMPER JET RIDER

The Venom Wave Jumper Jet Rider is the perfect boat for the pond or the pool. With its durable construction and dual motor drive-steering system, the Venom Wave Jumper offers fun, low maintenance R/C excitement. Ready to go boating, the Venom Wave Jumper has everything you need including a 27mhz AM transmitter, battery pack, wall charger, extra props and display stand. Venom boats are loads of fun and perfect for year-round radio control enjoyment. Get your remote control boats, accessories, and parts now at Full Throttle Hobbies - your Venom R/C Superstore! FEATURES: READY TO RUN IN MINUTES! INCLUDES: VENOM WAVE JUMPER JET RIDER 2-CHANNEL AM RADIO TRANSMITTER 1800mAh NiCd BATTERY PACK AC WALL CHARGER TWIN 380 TYPE MOTORS DISPLAY STAND 8 "AA" ALKALINES FOR TRANSMITTER ALL VENOM R/C BOATS COME WITH TOLL-FREE CUSTOMER SERVICE AND WARRANTY! TECHNICAL SPECS: Boat Name: Venom Wave Jumper Boat Boat #: VEN-1803 Age Rating: 14+ Power Type: Electric Stock Battery: Venom 1800mAh 7.2V NiCd (VEN-1530) Length: 21.7" (55.12cm) Width: 8.7" (22.1cm) Weight: 2.8 lb (1.27 kg) Skill Rating: Novice Requires: NOTHING! - Fully Ready to Run! ACCESSORIES & EXTRAS: Extra Venom 1800mAh 7.2V NiCd (VEN-1530) Extra "AA" Alkaline Batteries

VENOM SEGAD GAS RACING BOAT

The Venom Segad Gas Boat is part of Venom's new line of R/C gas race boats. The Venom Segad Class 1 Racing Ready-to-Run Gas Boat accurately replicates the 1995 Segad Class 1 Powerboat. At almost 5 feet long (Length - 58in/1470mm Beam - 15in/380mm), the Venom Segad Class 1 Racing RTR Gas Boat features a 2+ HP Water-Cooled 26cc Marine Engine that will rocket your boat to 35+ MPH/ 56+ KPH right out of the box! With the included 3-Channel Programmable FM Radio with High Torque Servos, Machined Aluminum Running Gear with Adjustable Drive Line, Hand-Laid Fiberglass Hull, Pre-Balanced Aluminum Propeller, a Sealed Acrylic Radio Box and a Laser Engraved padded wooden display stand, you'll have a top of the line Ready-to-Run Gas Boat at an amazing price! Venom's new line of gas boats offer some serious technology and the ultimate in radio control enjoyment. Boats are loads of fun and perfect for year-round radio control enjoyment. Get your remote control boats, accessories, and parts now at Full Throttle Hobbies - your Venom R/C Boat Superstore! FEATURES: READY TO RUN! ALMOST 5 FEET LONG! 35+Mph / 56+ Kph OUT OF THE BOX 2+ HP WATER-COOLED 26cc MARINE ENGINE 3-CHANNEL PROGRAMMABLE FM RADIO WITH HIGH TORQUE SERVOS (Venom Gas Boats come with the VR3T, a 3-Channel Computerized FM Radio featuring 3rd Channel Mixing and 15 Model Memory. The radio also has Programmable Steering Dual Rate with a thumb switch so you can adjust the steering sensitivity on-the-fly. The VR3T has so many high-end features you'll forget you're using an RTR kit radio!) MACHINED ALUMINUM RUNNER GEAR WITH ADJUSTABLE DRIVE LINE HAND-LAID FIBERGLASS HULL PRE-BALANCED ALUMINUM PROPELLER SEALED ACRYLIC RADIO BOX LASER ENGRAVED PADDED WOODEN DISPLAY STAND TECHNICAL SPECS: Racing Classification: Class 1 Length: 53.5"/1360mm Overall Length: 58"/1470mm Beam: 15"/380mm Height: 9"/230mm Overall Height: 13"/330mm Weight: 16lbs Fuel Capacity: 24oz Run Time: 30 minutes Sound Level: 84db Engine: Venom 26cc Marine Pull Start Gas Engine Displacement: 25.4cc Bore: 1.338"/34mm Stroke: 1.102"/28mm Max HP: 2.02@10,000 RPM Idle RPM: 3500 +/- 150 Fuel Type: 87 Octane w/Premix 2-Stroke Oil Carburetion: Walbro WT-644 w/Primer Pump & Choke Net Weight: 3.5lbs/1.6kg REQUIRES: "AA" Batteries: 12 (8 for transmitter, 4 for receiver box) Gasoline: 87 octane High Performance 2-Stroke Engine Oil ACCESSORIES & EXTRAS: "AA" Alkaline Batteries (12 needed)

MEGATECH NIRVANA II

The Megatech Nirvana II is a ready-to-sail radio controlled competition sailboat that has been designed from the keel up to handle like a full-scale racing yacht not a toy like other R/C sail boats. The Megatech Nirvana II's features are simply unbelievable. The Nirvana II has a low-drag composite hull design and a large 32-inch over-all length. Its removable racing keel with ballast-bulb and large area deep-water rudder work together to keep the Megatech Nirvana II on precisely controlled headings at all times. All rigging is mounted up to a super-ridged carbon fiber main mast and fully proportional sail winch that allow the sails to be trimmed for absolutely any combination of wind conditions and heading dynamic such as: close reach, broad reach or running with the wind! From stays to clew fasteners, the Megatech Nirvana II is absolutely regatta ready in minutes from opening the box. Even the 2-channel radio is pre-mounted and pre-centered in its watertight compartment. The Megatech Nirvana II is loads of fun and perfect for year-round radio control enjoyment. Get all your remote control boats at big savings now at Full Throttle Hobbies! FEATURES: INCLUDES HIGH-TORQUE, HEAVY DUTY, METAL GEARED SAIL WINCH SERVO MEMBER OF THE MEGATECH HP (HIGH-PERFORMANCE) SERIES 95% READY-TO-SAIL, SIMPLE ASSEMBLY IN JUST MINUTES COMPETITION MYLAR SAILS WITHSTAND UP TO 15 MPH WIND CONDITIONS 2-CHANNEL RADIO PRE-MOUNTED WITH LINKAGES LOW-DRAG COMPOSITE HULL DESIGN CARBON FIBER MAST REMOVABLE RACING KEEL WITH BALLAST BULB LARGE AREA, DEEP-WATER RUDDER FULLY PROPORTIONAL RADIO WITH SAIL WINCH CONTROL ONLY MINUTES FROM BOX TO WATER (NO GLUE REQUIRED) CAPABLE OF SAILING SPEEDS OF 6 KNOTS JIB FEATURES LIGHTWEIGHT BOOM AND ADJUSTABLE CLEW TENSION MAST FEATURES QUICK RELEASE "FOOT" FOR PORTABILITY. BOTH JIB AND MAINSAIL BOOMS ARE TRIMMED VIA FULLY PROPORTIONAL RADIO CONTROL. BALLAST BULB STYLE RACING KEEL FEATURES QUICK RELEASE FOR EASY PORTABILITY FULLY INSTALLED DIGITALLY PROPORTIONAL RADIO PROVIDES ACCURATE SAIL CONTROL AND "UNDERWAY" TRIM CHANGES RADIO COMPARTMENT IS SELF-SEALING FOR WATER TIGHTNESS COMES IN BLUE, RED OR YELLOW BOAT STAND INCLUDED ALL MEGATECH PRODUCTS ARE BACKED WITH TOLL-FREE CUSTOMER SERVICE AND WARRANTY! TECHNICAL SPECS: Megatech Classification: HP Series Age: 18 and up Hull Length: 32 inches Height: 65.5 inches Weight: 5.5 lbs. Beam: 7.75 inches Sail Area: 578 inches Speed: Up to 6 knots Top Wind Speed: 15-20 knots Radio: 2-Channel Radio Range: 1500 feet REQUIRES: 12 "AA" alkaline batteries for transmitter ACCESSORIES & EXTRAS: 12 Energizer "AA" Alkaline Batteries (8 for transmitter, 4 for receiver)

TRAXXAS VILLAIN EX ELECTRIC RACE BOAT RTR

NOW COMES WITH 2 FREE 7.2V BATTERIES The Traxxas Villain EX sets the new benchmark in electric deep-V performance. Powered by dual motors and a 14+ volt electronic speed control, it streaks across the water at speeds that are capable of embarrassing even some nitro boats. The Villain EX is engineered to be fast, smooth, stable, and reliable; all the perfect ingredients for fun R/C boating. The Villain EX is fully assembled and Ready-To-Race, so you're ready for action just minutes out of the box. FAST The Villain EX uses a water-cooled marine version of our powerful EVX-2 electronic speed control. At low speeds, the fully proportional EVX-2 Marine ESC allows precise dockside maneuvering in forward and reverse. Lay on the throttle and the EVX-2 pushes over 14-volts of power from two battery packs into the twin Titan 550 Marine fan-cooled motors. The EVX-2 Marine is designed and manufactured by Traxxas to ensure the highest level of quality and support. Now includes Traxxas High-Current Connectors! The quest for ultimate speed began with the battery connector. As todays batteries store more and more energy inside their cells, traditional battery connectors became a roadblock, unable to deliver all the energy the battery is capable of outputting. The new Traxxas High-Current Connector opens the door for unrestricted current flow. SMOOTH The Villain EX is equipped with a new propeller design. These new surface-piercing propellers are engineered to operate with speed and efficiency using full-size boat technology. The propellers are counter-rotating to prevent torque roll and eliminate the need for drag-inducing trim tabs. The dual, steerable outdrives direct the propeller's thrust for ultra-precise steering response. The trim angle of the outdrives can be adjusted to change how high the bow rides in the water. STABLE Some boat designs, such as hydros, require that the water be glass-smooth to run or a small wave will catch the sponson and flip the boat. In the real world, the wind blows and water gets choppy. The Villain EX can run in rough water that leaves hydros and other designs back at the dock. The Villain EX utilizes a proven 31-inch deep-V hull design that slices through rough, choppy water with ease. The proper weight balance and low center of gravity help keep it upright providing unsurpassed stability. Molded strakes in the hull, along with the counter-rotating propellers, allow higher turning speeds. RELIABLE Usually, one of the biggest challenges for electric boat enthusiasts is keeping the electronics dry. Not so with the Villain EX. It's quipped with a sealed radio box to prevent water from damaging the sensitive electronics. Everything is encased, even the steering servo. The plastic cover uses a Twist Lock fastener for easy access and positive sealing against the rubber gasket. There are no flimsy, taped-down hatches to bother with. You can count on the performance from the tough, molded ABS hull and durable, proven drivetrain. The BEC circuit in the electronic speed control maintains steering control, even when the batteries are nearly discharged. Built-in foam flotation provides extra security by keeping the Villain EX afloat if it should ever accidentally flip over. FEATURES: NOW COMES WITH 2 FREE 7.2V BATTERIES Fully assembled, Ready-To-Race 31-inch deep-V hull High-power, pistol-grip radio system Realistic, scale design and detail Fast, efficient 12-cell, 14+ volt power system Water-cooled electronic speed control Twin Titan 550 Marine fan-cooled motors Fully proportional forward and reverse control Dual, gear drives with adjustable 2:1 reduction T6-aluminum motor plate Composite-nylon motor mounts Counter-rotating, surface-piercing propellers Dual, steerable outdrives Realistic, adjustable trim angle Twist Lock top deck provides easy access Full-color, die-cut decals Built-in foam flotation Requires: 6-7 Cell Peak or Timed Battery Charger; (8) "AA" Alkaline Batteries for Transmitter TECHNICAL SPECS: Hull Type: Offshore Deep "V" Dead Rise Angle: 24 Degrees Hull Length: 31 Inches (787mm) Beam: 8.25 Inches (209mm) Weight: 56oz (1.587kg) Draft: 4.5 Inches (114mm) Speed Control Type: EVX-2 Marine ESC Motor (electric): Twin Titan 550 Marine Drive System: 2:1 Gear Reduction Drive Outdrive: Adjustable Surface-Piercing ACCESSORIES & EXTRAS: 6-Cell 7.2V Stick Batteries w/Traxxas High Current Connector (2 used) 6-7 Cell Timed or Peak Detection Charger Alkaline Batteries for Transmitter (8 needed)

TRAXXAS TITAN VXL 6S BRUSHLESS RTR RACE BOAT w/2.4Ghz RADIO

Extreme Power and Speed Its the kind of boat you would expect from Traxxas: Extreme Velineon brushless power, ballistic speed, and a huge waterfall of roost that rains down long after the boat speeds by. The howling fury of 50+ mph across the water on optional 6S LiPo power will make even the most insatiable, power-hungry enthusiasts jump up and take notice. Simply put, Titan is your boat! Everything about it means business: the super-rigid, 36-inch deep-V hull; smooth, cable-drive efficiency; innovative water cooling system; and precision aluminum and stainless steel drive controls. The clean, modern hull design is built up in layers for maximum rigidity where it matters most, the transom and ride pad. The integrated battery trays securely hold a variety of battery configurationsfrom the included 7-cell Power Cell NiMH packs to 3S LiPos. Ride trim is easily adjusted by positioning the packs fore and aft using the convenient hook and loop straps that secure the batteries. The optimized rudder configuration carves amazing full-throttle turns. A high-output 2.4GHz radio system with Traxxas Link, along with water-cooled and waterproof electronics, keep Titan going for the trouble-free, all-day running you count on from Traxxas. No detail was overlooked on our mission to engineer a boat that offers the power, speed, convenience, and fun that Traxxas award-winning cars and trucks are known for. Prepare yourself for the ultimate R/C boating power trip, only from Traxxas. 100% Ready-To-Race Titan is fully assembled with a TQ 2.4GHz radio system, Velineon brushless power system, applied graphics, and detailed instructions. Two Traxxas Power Cell 7-cell NiMH batteries are also included. Designed specifically for the high-power needs of the Velineon brushless system, the potent Power Cell packs feature heavy-duty construction, 12-gauge wires and Traxxas' High-Current Connectors for efficient power transfer, run after run. Traxxas backs the Titan and all of our products with industry-leading support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows Titan to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your R/C experience is easy and funand fast! FEATURES: Includes two 7-cell Power Cell battery packs 30+mph out of the box, 50+mph on 6S LiPo! 36" deep-V hull for stable high-speed performance Water-cooled, waterproof VXL-6s Marine speed control 6S LiPo compatible with built-in Low-Voltage Detection Traxxas High-Current Connectors Velineon 540XL high-output brushless motor with highflow water-cooling jacket Quick-release Power Module integrates power system, waterproof electronics, and stuffing tube Adjustable battery trays with hook-and-loop straps Blue-anodized aluminum rudder support, rudder, and drive strut Stainless steel turn fins, trim tabs, and hardware TQ 2.4GHz High-Output radio system with Traxxas Link Waterproof high-torque steering servo Sleek design with factory-applied graphics Ready-To-Race Traxxas factory support Requires: 7 Cell NiMh Peak or Timed Battery Charger; (8) "AA" Alkaline Batteries for Transmitter TECHNICAL SPECS: Hull Type: Deep "V" Dead Rise Angle: 26 Degrees Hull Length: 36.5 Inches (927mm) Beam: 9.5 Inches (243mm) Weight: 72oz (2041gr) Speed Control Type: Traxxas Velineon VXL-6s, Watercooled Motor (electric): Traxxas Velineon 540XL Brushless, watercooled Drive System: Direct Drive, 0.150 Flex Cable Outdrive: Adjustable Aluminum Transmitter: TQ 2.4GHz High Output with Traxxas Link ACCESSORIES & EXTRAS (select at right): 7-Cell 8.4V Stick Batteries w/Traxxas High Current Connector (2 used) 3S LiPo Batteries w/Traxxas High Current Connector 7 Cell Timed or Peak Detection Charger Alkaline Batteries for Transmitter (8 needed)

TRAXXAS BLAST ELECTRIC BOAT RTR

High-Performance Electric Race Boat! plus, This Traxxas Bonus Edition comes with one basic 6-Cell NiMh Battery & Charger FREE! *Note that included battery capacity is 3000mAh & that included wall charger takes 8 1/2 hours to charge. Upgrades are available for both battery and charger - see right sidebar for additional options. Waterproof Electronics - The Traxxas Blast is designed to be fast, easy to drive and reliable. Its a hot performer with its powerful 20-turn Stinger motor, efficient shaft drive, and exclusive Nautica waterproof electronic speed control. Nauticas digital circuitry provides fully proportional throttle control and long run times. The steerable outdrive, deep-V stability, and surface-piercing prop work together to keep the Blast on a solid course in rough water. You can even adjust the trim angle of the outdrive for the perfect ride. The Blasts colorful decals and simple operation get you out on the water and having fun fast! Waterproof electronics keep the fun going all day! The steerable outdrive and surface piercing prop work together with the specially designed hull to keep the Blast on a solid course, even during the most radical wave thrashing. It's exciting action in a swimming pool and powerful fun on the open water. Best of all, the Blast is fully-assembled and ready-to-run with the radio system and electronic speed control installed. You'll be challenged by the waves, not an assembly manual. Blast's colorful decals and simple operation get you out on the water and having fun, fast! FEATURES: Full-Color Die-Cut Decals Traxxas High-Current Connector Two-channel Two-Stick Radio System Built-In Foam Floatation 4-6 Cell Operation Surface Piercing Propeller Direct Drive 24" Deep-V Hull Waterproof Electronics Sealed Receiver Box Nautica Waterproof Electronic Speed Control High-Torque Waterproof Servo Stinger 20-Turn Motor Steerable Outdrive Traxxas Customer Support Swimming Pool Size Includes Boat Stand Fully Assembled, Ready-To-Drive Right Out Of The Box Requires: 6-Cell 7.2V Stick Battery with the New Traxxas High Current Connector or Female Connector to Molex Male Connector; 6-7 Cell Peak or Timed Battery Charger; (8) "AA" Alkaline Batteries for Transmitter TECHNICAL SPECS: Hull Type: High Performance Modified "V" Dead Rise Angle: 20 Degrees Hull Length: 23.75 Inches (603mm) Beam: 5.75 Inches (146mm) Weight: 28oz (.793kg) Draft: 3.25 Inches (83mm) Speed Control Type: Nautica Waterproof ESC Motor (electric): 540 Stinger (20-turn) Drive System: Direct Drive Outdrive: Adjustable Surface-Piercing Radio System: Traxxas Two-Stick (two-channel) Skill Level: 1 ACCESSORIES & EXTRAS: 6-Cell 7.2V Stick Battery w/Traxxas High Current Connector (1 needed) 6-7 Cell Timed or Peak Detection Charger Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

TRAXXAS 1/16 E-REVO VXL 4WD MONSTER TRUCK

We Scaled Down Everything . . . Except the Power! E-Revo Precision, Innovation, and PerformanceNow in 1/16 Scale! Traxxas sets the standard for power, performance and innovation. Now, for the first time, all the speed, quality and capability you expect from Traxxas is available in 1/16 scale with the new 1/16 E-Revo VXL. Only 14 inches long, the E-Revo VXL is about half the size of the 1/10-scale E-Revo. But don't call it a "mini"this is a whole new category of R/C performance and fun that no mere mini-model can match. Beneath the factory-finished polycarbonate shell, you'll find the winning suspension technology of the seven-time National Champion Traxxas Revo, screaming Velineon brushless-motor power, and the convention-busting innovation of the E-Revo. Proven Traxxas Innovation The E-Revo VXL is built on the race-winning, track-proven innovation of the Revo and E-Revo models. The standard-bearer of design excellence, the Revo's F1-inspired, rocker-actuated suspension has been expertly adapted to 1/16 scale with all its functionality and performance intact, right down to the oil-filled, threaded-body GTR shocks. No detail was overlooked in our mission to bring all the capability, durability, and excitement of Traxxas' award-winning models to 1/16 scale for fast, affordable R/C fun. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. The suspension and electronics are fully integrated into the semi-monocoque chassis design that stunned the world when it debuted with the E-Revo. Intricately molded as a single piece, the chassis balances strength and weight, function and aesthetics, convenience and performance to far surpass the standards of the "mini" category. The Fastest Name In Radio Control. In 1/16 scale, it is an even more impressive achievement of packaging and performance optimization that could only come from Traxxas. Velineon Brushless Power All-new and built specifically for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. Patent-pending Training Mode lets new drivers hone their skills at 50% throttle. When drivers' ed is through, full power and 50+mph is unleashed with a touch of the EZ-Set button. Big speed requires big horsepower, so E-Revo VXL and Slash 4WD VXL carry the largest motor in the "mini" category. The Velineon 380 is built to the same no-compromise specs as the Velineon 3500 found in Traxxas' 70+mph 1/10 scale VXL models. High-speed ball bearings. Sintered rotor. Neodymium magnets. Gold plated 3.5mm connectors. It all adds up to 50,000 rpm of pure power and track-searing speed! Waterproof Electronics For No-Limits R/C Excitement Now a hallmark of Traxxas vehicles, E-Revo VXL is the latest model to be equipped with fully waterproof electronics to keep the fun rolling in water, mud and snow while lesser cars stay on the bench. The patent-pending sealed receiver box houses Traxxas' newest 4-channel micro receiver and can accept aftermarket receivers as well, without compromising the 1/16 VXL models' waterproof properties. The new VXL-3m electronic speed control and high-torque, digital micro servo are sealed against the elements giving you the freedom go places other cars wouldn't dare to venture. 100% Ready-To-Race The 1/16 E-Revo VXL is fully assembled with TQ radio system, Velineon brushless power system, painted and decaled body, pre-glued tires, and detailed instructions. A Traxxas Power Cell NiMH battery and charger are also included, making the E-Revo VXL truly Ready-To-Race. Designed specifically for the high-power needs of the Velineon brushless system, the potent Power Cell pack features heavy-duty construction, 16-gauge wires and Traxxas' exclusive High-Current Connector for efficient power transfer, run after run. Traxxas backs the E-Revo VXL and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows the E-Revo to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your R/C experience is easy and fun (and fast!). Follow the details link above to go in depth on all the E-Revo VXL performance benefits and also be sure to check out the videos page to see it in action for yourself. FEATURES: * Race-winning, F1-inspired Revo suspension technology and E-Revo integrated chassis design, perfectly optimized for 1/16 scale * Powered by the Velineon Brushless Power System * Traxxas High-Current Connector allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System * Velineon VXL-3m Electronic Speed Control a. LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection b. Sport Mode Forward / Brake / Reverse c. Race Mode Forward / Brake d. Training Mode - 50% Forward / Brake / 50% Reverse (patent pending) * Velineon 380 Brushless Motor a. High-performance sensorless design b. High-strength Neodymium magnets c. Efficient, high-speed ball bearings d. Precision-balanced rotor e. Gold-plated 3.5mm bullet connectors * Digital High-Torque Waterproof Micro Steering Servo * Waterproof, o-ring sealed receiver box * Traxxas 4-channel micro receiver * Sealed, silicone-filled differentialsan industry first in 1/16 scale * Torque-Control slipper clutch system * Telescoping universal-joint driveshafts * Rubber-sealed ball bearings * External gear cover with easy slipper access * Rocker-actuated shocks provide true progressive damping and spring rates * Threaded-body, oil-filled shocks permit fast, precise preload adjustments and deliver smooth, consistent damping * Fiber-composite monocoque chassis * Speed control and receiver are securely fastened to chassis * Integrated battery compartments with intake and exit cooling vents * Quick-release battery doors for fast pack changes * Scale all-terrain front and rear tires offer superior on- and off-road traction * Pre-glued Talon tires with high-performance foam inserts * Black-chrome Gemini 5-spoke wheels * High-downforce rear wing * Full line of genuine Traxxas accessories available * E-Revo VXL is backed by unparalleled Traxxas support and parts availability TECHNICAL SPECS: align=right> E-Revo Specs ACCESSORIES & EXTRAS: * 7.2V NiMh 2/3A Stick Battery Packs (1 or 2 used) * Peak Charger * Alkaline Batteries for Transmitter (8 needed) Click picture to enlarge

Airtronics RX600 6-Ch Air 2.4Ghz Mini Receiver - FHSS-1 Full Range

NEW Airtronics has expanded their 2.4Ghz Aircraft Receiver Selection with this economical and light full-range 6-ch FHSS-1 Aircraft receiver. This FHSS-1 receiver is compatible with both the RDS8000, the SD-5G and the SD-10G, providing Airtronics users with an affordable Full Range receiver option. In standard Airtronics fashion, this receiver utilizes easy-to-bind push button procedure, dual antennas for easy installation and flexibility, and it's lightweight and small. From flying 60 size planes or park flyers, this receiver will handle it with ease. Specifications: * Input Voltage (4-5 cell Ni-Cd/MH type battery), nominal 4.8-6.0v * Weight with case and antennas: ..27oz (7.8g) * Length: 1.64" (41.7mm) * Width: .85: (21.5mm) * Height: .47" (12mm)

Airtronics RX-451R M11X SSR FHSS-3 Receiver (for SSR Sx)

NEW Super Response Technology by Sanwa (S.S.R.) for the M11X 2.4GHz radio! S.S.R. technology gives servo response up to 5 times faster using the new Airtronics Matched S.S.R receiver and servo system! Engineers at Sanwa have created an entirely new concept for operation of digital servos utilizing the incredibly fast frame rates and precision digital signal only found in Airtronics 2.4GHz technology. The FHSS-3 SSR receiver has an improved latency of 2.5ms, beating the current M11X standard receiver of 4ms. This receiver was already the fastest in the industry - Airtronics made it FASTER! In the fastest frame rate mode of the M11X, in addition to this industry leading latency, and fastest frame rate, the pulse width is narrowed providing quicker and more precise response. You will feel more connected to your car than ever before. Experience lightning speed reaction as if you were hard-wired to your radio. Compatibility Note: SSR receiver will work with regular Digital servos although there will be no increase of performance. Analog servos are not compatible with the SSR receiver. Also, in the fastest response mode, some ESC's are not compatible. FEATURES: * Dimensions: 1.43 x .94 x .59 in (36.5 x 24 x15 mm) * Weight: .3oz (8.5g) * Fail Safe Limit: 3.8v Default - 3.5v to 5.0v adjustable * Frequency: 2.4GHz FHSS-3 * Input Voltage (Nominal): 4.8v - 7.4v (4 and 5 cell Ni-MH and Ni-Cd packs to 2-cell Li-PO)

Airtronics Receiver - SD-10G (only) FHSS-3 10-ch 2.4GHz

SD-10G (only) FHSS-3 10-Channel Receiver: Ultimate Airtronics 2.4Ghz Power! The 10-ch Airtronics 2.4Ghz Receiver for the SD-10G (No. 92104) is one of the smallest 10-channel receivers ever offered in the hobby industry. This receiver is no bigger than the Airtronics 2.4Ghz 8-channel RDS8000 receiver and actually lighter! Airtronics has also used their industry-first antenna/extension system (developed originally on the RDS8000 receiver in 2007) which allows maximum flexibility for installation. You can always position the antennas in the optimum position for your application, including carbon fuselages! When you're talking receivers, smaller is better and this 10-ch receiver is simply TINY. And, it does not require satellite receivers to acheive full range.This receiver is only compatible with the SD-10G 2.4Ghz transmitter. This receiver is compatible with Airtronics Z-Plug and others with the same wiring order and plug shape/size. FEATURES: * Length:(49.5mm) 1.95" * Width:(26.7mm) 1.05" * Height:(15mm) .6" * Weight - WITH antennnas and the case: .53oz (15g)

Airtronics MX-Sport 2.4Ghz 3-Ch FHSS-2 Radio Tx/Rx

The ULTIMATE sport 2.4GHz car/boat radio! The MX-SPORT from Airtronics is possibly the best-value 3-channel computer 2.4GHz radio in the hobby today. It has amazing features usually only found on radios for twice the price. MX-Sport: 3 Channels at a 2-Channel Price! Compare to the competition and you'll agree - THERE IS NO COMPARISON! The MX-Sport is the best value in 2.4GHz radios today. FEATURES: * Full-Range FHSS-2 Technology - Compatible with M11 FHSS-2, and MX-3 FHSS-2. MX-Sport Receiver is ALSO compatible with the M11X * 3 Channels * ABS Brake Function * Receiver Bind Button (Makes binding EASY - no "plug" required) * Battery-less Memory Retention * 10-Model Memory * Model Naming * Low-Profile Mini 3-ch 2.4GHz FHSS-2 Receiver * Frequency Hopping * Over 1000 feet of range * Compatible with BOAT USE * Throttle Fail-Safe * Steering and Throttle Dual-Rate * Steering and Throttle EXPO

Airtronics MX-3X 2.4Ghz FHSS-3 Competition Pistol Grip Radio w/92744 RX

Airtronics MX-3X 2.4Ghz Competition Pistol Grip Radio w/92744 Don't spend more! Get the best-value competition radio available today - Get the Advantage. ONLY AT AIRTRONICS MX-3X - The standard in high performance 2.4GHz Pistol Grip radios at a price anyone can afford. The latest version of the Airtronics' MX radio family, the MX-3X. Today's MX-3X is the pinnacle of this development. This is a 3-channel radio with advanced programming that some radio manufacturers do not offer at any price! Since the beginning, the MX series has lead the way with a feature-packed radio at an affordable price. The MX-3x is not only feature-packed, it is also FAST. Truly FAST. The MX-3X uses the same high-speed, high-performance FHSS-3 technology previously only available in the top-of-the-line M11X! This makes it one of the fastest radios at ANY PRICE! However, just because we used FHSS-3 in this radio does not mean you are locked into using only high-end receivers! All of the fast and affordable FHSS-2 receivers from Airtronics are compatible with the MX-3X. So, when you're running a sport truck or "for fun" vehicle, aftermarket receivers are available at some of the most affordable prices in the industry today. And, because we're using FHSS-2 and -3 technology, the radio has extreme range and is compatible with boats and cars - even 1/4th scale! FEATURES: * Model naming * 18-model memory * Full range 2.4GHz FHSS-3 spread spectrum technology * Extremely fast latency transmission * 3-channel use * Variable 3rd channel multi-function mode switch * Adjustable incremental steps for 3rd channel servo to have multiple positions * Light weight to prevent fatigue during extended driving situations * Multiple failsafe settings for gas or nitro-powered vehicles * Allows 4-wheel steering, crab, and steering lock for crawlers * Allows dig, burn, and free adjustments for crawlers * Allows dual speed controls to be mixed together and independently * Allows a variety of mixing of the 3 channels * Adjustable servo speed settings * Exponential, dual rate, and end-point adjustment settings * Backward-compatible with FHSS-2 receivers * Adjustable trim steps for customized preference * 'Beep' can be muted for quiet operation * Battery alarm * Adjustable power supply (4-cell alkaline, 6-cell NiMh, or 2-cell LiPo) * Ergonomic design with adjustable trigger for various sized hands * With all these features in one of the fastest 2.4 systems on the market, the MX-3X is perfect for any level of the hobby. For first-time users or professional racers, there are features that can be suited to the driving style and need of any one on land or water!

Airtronics M11X 2.4Ghz FHSS-3 4-Ch Radio w/TX & RX

M11X 2.4Ghz FHSS-3: Ultimate Airtronics Power! M11X 2.4Ghz 4 Channel Surface Radio for Cars, Boats, and Other Surface Uses M11X Fast, Powerful & Light 2009 Multi-Event ROAR National Champion: Ryan Maifield - 1/8th Truggy, 1/10th Mod Electric Truck Ryan Cavalieri 1/10th 2WD Mod Buggy , 1/10th 4WD Mod Buggy. The M11X is the top-of-the-line ROAR NATIONAL CHAMPION competition surface radio that serious racers demand and the sportsman desires. Based on the legacy M8 & M11 radios that have won numerous awards, the M11X continues with the tradition offering the best radio with the most features all users can appreciate. The M11X is lighter than previous models, faster than any wheel radio we've tested, and has additional features and numerous adjustments beyond even that of the original M11. And yet, its new layout makes using those features easier than ever before. From a custom menu where you can put your favorite features on one screen to multiple failsafe settings to optimize this feature for nitro or electric, the new M11X is amazingly powerful and easy to use. For professionals, nothing matters more than speed and reliability. The M11X is lightning fast, thanks to the 2.4GHz system integrated into the radio circuitry in addition to using the latest FHSS-3 Sanwa 2.4GHz technology. This feature, alone, makes the radio inputs feel instantaneous! Lastly, while the legacy M11 had numerous adjustments, the M11X takes it one step further. We work closely with our world-championship drivers, both boat and car, and we listened to them. The M11X has the added features needed for an ever-changing and expanding hobby. With extended race times and events, the weight of the transmitter is more important than ever. The newly-designed, more-efficient, dedicated 2.4Ghz RF system along with the smaller and lighter transmitter battery work together to make the M11X lighter and easy to handle. The M11X has a more traditional balanced feel and improved ergonomics. The M11X radio system includes the Transmitter, Receiver, Transmitter Battery, Transmitter Battery Charger, Switch-Harness, and Manual. Available after-market are sport and competition servos, lithium transmitter battery, DSC cord, and radio case. M11X - 2.4Ghz FHSS-3 4Ch Radio Set With 1500mAh Ni-MH Transmitter Battery and Charger - (TX/RX - No SX) FEATURES: * System Includes 6-cell 1500mAh Ni-MH TX Battery And Charger * Transmitter Is Compatible With Lithium 2 Cell Batteries * Ball Race Supported Steering Wheel and Trigger With Adjustable Spring Tensions * High-Power FHSS-3 Technology Gives The Best Reception And Connectivity Giving Racers Added Assurance * 2.4GHz FHSS-3 System Is Integrated Into The Radio System Eliminating The Need For Modules. * Transmitter Can Be Adjusted For Left or Right Handed Drivers * 4 Channel Computer Radio With Advanced Programming for Competition Cars, Trucks, and Boats * Compatible With Current Airtronics 2.4GHz FHSS-2 Surface Receivers * Adjustable Back Light Display and Vibration Settings * Variable Rate Adjustment Can Be Used to Self-Calibrate or Compensate the Servo Movement to 100% When the Steering Wheel Has Been Limited to Move Less * Throttle Hold Setting for Reliable Pit Stops for Nitro/Gas Use * Speed Sensitive Steering and Brake Adjustments * Exponential Control Settings for Steering and Throttle * Adjustable Rate Control Settings for Steering and Throttle * Throttle and Brake Mixing for Large Gas Vehicles * Adjustable Dial Can be Set for Dig Functions, Remote Needle Valve Settings, or Reverse Functions * 30 Model Memory * Customizable Menu for Commonly Used Features Instead of Scrolling Through the Radio Menu * Easy Navigation Menu * Easily Activated and Inhibited Mixing Functions While Driving * Failsafe Programming Available On All Channels for Electric and Nitro/Gas Use * User and Model Names Can be Assigned * Assignable Switches and Trims * Vibration Setting for Timer Notifications in Noisy Environments * Multi-Function Timer/ Lap Counter * Electronic Traction Control * Anti-Lock Braking System

Airtronics M11 2.4Ghz FHSS-2 Radio w/TX & RX

M11 2.4Ghz FHSS-2: Airtronics Gives you More! The Airtronics M11 FHSS-2 (Frequency Hopping) 2.4 GHz Spread Spectrum Radio System is based on the award winning, world champion M11 Competition Pistol Grip Radio. target="_blank"> Now you can have Full-Range, crystal FREE, interference FREE performance in the powerful M11 chassis. PLUS, complete compatibility with any Airtronics FHSS-2 receiver! The M11 FHSS-2 is a high-output, full range 2.4GHz system with all the features of the M11, plus 30 Model Memory. You can save all of your models and setups in one transmitter and be on your way to the track. And never worry about having the correct crystal, because you have crystal FREE interference FREE 2.4 GHz technology. The M11 FHSS is available as a transmitter and receiver system that includes: 2.4 MHz Transmitter, Receiver and Dry Battery Holder. Additional FHSS-2 2.4 GHz 4-channel receivers (AIR92624) are available separately. The M11 transmitter holds among its many titles 2009 1/8th ROAR National Champion. * Features list is long and impressive making this one of the most powerful radios ever on the market, and yet its high end functions make it easy to work with at home or at the track FEATURES: * Frequncy Hopping Spread Spectrum Technology (FHSS-2) * Auxillary Channel 3 Dial * Adjustable Trigger Level and Tensions * Soft Touch Programming Keys * Charging Jack for Optional Transmitter NiCd Battery Pack * 4 Channel 2.4 GHz Receiver * 4 Cell Dry Battery Holder * Switch Harness * 4 Channel 2.4 GHz Computer System * Digital Dual Rate Steering Adjustment * 30 Model Memory * Interference Free * No Need to Change Frequency * Ergonomic Comfort Handle * Digital Trims * Extensive, powerful computer * Large LCD Display on Transmitter with Optional Cover * Switchable for left or right-handed use * Low Profile Transmitter Antenna.

HPI VORZA FLUX HP BRUSHLESS 4WD 1/8 BUGGY RTR

Designed after the world championship winning Hot Bodies D8 1/8-scale 4WD buggy, the HPI Vorza goes green and receives a full brushless makeover. Complete with proven Flux Blur ESC and Tork Motor that are also found in the HPI Savage Flux HP, all you need to do is add your battery packs of choice to reach extreme speeds. The Vorza is competitively priced and packaged as a complete ready-to-run 1/8-scale Buggy that will satisfy the needs of the backyard basher, front of your house street racer, and even those that love the competitive side of things! A extreamly strong drive train that consists of front universals, front, center and rear fluid filled differentials and hardened steel spur and pinion gear make for a car to take the harshest of demands. The Vorza truly packs a punch when it comes to handling and ease of drivability thanks to its extremely plush 16mm big bore aluminum shocks with threaded body, fully adjustable suspension blocks, adjustable camber and toe, and even sway bars at both the front and rear of the car. FEATURES: * Powerful Flux Tork 2200Kv Brushless Motor provides high performance, efficiency, and long Motor life * Durable Black Nylon Wing for High Downforce * LiPo Ready - Accepts 4S to 6S Packs for the Ultimate Power Source. * Tough V7 Wheels with Proto Tires * Suspension Based on the World Champion D8 * 16mm Big Bore Aluminum Shocks * REQUIRES: o (2) 6 or 7-Cell NiMh Batteries with Deans Ultra Female Connector o or, (2) 2S or 3S LiPo Batteries (25C min rec.) with Deans Ultra Female Connector o Appropriate Charger for Battery o "AA" Alkaline Batteries for Transmitter (8 needed) TECHNICAL SPECS: * Length: 20" (508mm) * Width: 12" (304.8mm) * Height: 7" (178mm) * Wheelbase: 12.7" (325mm) ACCESSORIES & EXTRAS: * "AA" Alkaline Batteries for Transmitter (8 needed) * 6 or 7-Cell NiMh Batteries with Deans Ultra Female Connector * 2 to 3-Cell LiPo Batteries with Deans Ultra Female Connector * Appropriate Charger for Battery Click picture to enlarge

Throttle Return Spring (Revo/Slayer)

This is the Throttle Return Spring for the Traxxas Revo and Slayer. This spring will return the throttle position to closed.

VENOM PRO CHARGER PLUS w/POWER SUPPLY

If you have been searching for just one RC battery charger to handle all of your charging needs, look no further than the Venom Multi Function Pro Charger Plus. Venoms Pro Charger Plus is available in an AC/DC power configuration to suit a variety of user needs. The Venom Pro Charger Plus will charge 1 to 8 cell LiPO and LiION/LiFE Battery Packs, as well as NiCD and NiMH battery packs with 1 to 27 cells and Lead Acid Batteries. THEY HAVE ARRIVED - GET YOURS TODAY!! The Venom Pro Charger Plus has many easy to use features which include; Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells), User definable charge rates from 0.1 amps to 7.0 amps, USB PC Linkability, Temperature Probe and 10 User-Defined Charger Profiles. Comes with six different charging plugs including the Traxxas High Current Connector (TRX Plug). The Venom Pro Charger Plus is a perfect compliment to Venoms extensive line of batteries using the Traxxas High Current Connector. FEATURES: Can Handle Charging, Discharging, Balancing (LiPO/LiON/LiFE cells), Cycling and More! Handles Five Different Kinds of Batteries: NiCD, NiMH, LiPO, LiON/LiFE and Lead Acid Batteries Handles 1 to 8 Cell LiPO, LiON/LiFE at a Time and 1 to 27 Cells for NiCD and NiMH Batteries Allows Users to Define Charge Rates from 0.1 amps to 7.0 amps Depending on What They Need User Can Create up to Ten Different Charger Profiles with a USB PC Connection Built-In Temperature Probe Comes with Six Different Charging Plugs Including the New Traxxas High Current Connector SPECIFICATIONS: AC/DC compatible with included AC power adapter Input: 12V DC Length: 164mm Width: 120mm Height: 45mm Weight: 21.1oz/598g CHARGING CAPABILITIES: LiPO/LiION/LiFE: 1-8 cells NiMH/NiCD: 1-27 cells Lead Acid (Pb): 2V-36V Charge Rate: 0.1 7A Discharge Rate: 0.1A 5A Charge / Discharge Cycles: 1 to 5 cycles 10 Profile memory USB PC link CERTIFICATIONS: UL Approved CE Approved All Venom copy and images are provided courtesy of Venom Group International

VENOM GPV-1 MOTORCYCLE 7.2V 1200mAh 2/3A NiMH BATTERY

Get your NiMh battery for the Venom GPV-1 R/C Motorcycle today! Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: VENOM 7.2V 1200mAh 2/3A NiMH BATTERY For Use With: GPV-1 R/C Motorcycle

VENOM 9.6V 4200mAh NiMh HUMP BATTERY - UNI Plug (1546-8)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your Venom 9.6V 4200mAh NiMH Hump Battery today! Venoms top selling SC battery capacities are now available in an all new 8-Cell configuration, featuring the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire, and JST HX 2.5 balance plug for performance and convenience. FEATURES: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 1.77" (45mm) Weight: 18.4 oz (0.52kg) Plug Type: Venom Universal Plug Capacity: 4200mAh Cell Configuration: 8-Cell Hump Pack Voltage: 9.6V Amp Rating: 4.2 amps

VENOM 9.6V 3000mAh NiMh HUMP BATTERY - TRX Plug

Get your Venom 9.6V 3000mAh NiMH Hump Battery with Traxxas Plug. Venoms top selling SC battery capacities are now available in an all new 8-Cell configuration with Traxxas new High Current Connector. Specifically designed to complement the high power capability of Traxxas Velineon Brushless Power System, Venoms new 9.6V 8-Cell battery packs will deliver increased speed to the new Traxxas vehicles at an economical price. FEATURES: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 1.77" (45mm) Weight: 18.4 oz (0.52kg) Plug Type: Traxxas Capacity: 3000mAh Cell Configuration: 8-Cell Hump Pack Voltage: 9.6V Amp Rating: 3 amps

VENOM 9.6V 3000mAh NiMH HUMP - EC3 Plug

Venom's most popular batteries are now equipped with the efficient EC3 plug. These 3.5mm high-performance plugs are popular in many applications and provide safe, error free connections. Choose from our 3000mah NiMH 6, 7, and 8 cell pack configurations or our 20c 4000mah and 5400mah LiPO packs. This battery is perfect for the new Venom King of Shaves C1 Electric racing boat! FEATURES: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 1.77" (45mm) Weight: 18.4 oz (0.52kg) Plug Type: EC3 Capacity: 3000mAh Cell Configuration: 7-Cell Hump Pack Voltage: 8.4V Amp Rating: 3 amps

VENOM 8.4V 5000mAh NiMh FLAT BATTERY - UNI Plug (1527-7)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your Venom 8.4V 5000mAh NiMH Flat Battery. This all new 7-Cell Flat configuration is built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. NOW WITH VENOM UNIVERSAL PLUG SYSTEM! FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 6.1" (155mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 17.6 oz (0.50kg) Plug Type: Traxxas Capacity: 5000mAh Cell Configuration: 7-Cell Voltage: 8.4V Amp Rating: 5 amps

VENOM 8.4V 3000mAh NiMh HUMP BATTERY - UNI Plug (1532-7)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your Venom 8.4V 3000mAh NiMH Hump Battery with Traxxas Plug today! This all new 7-Cell Hump configuration is built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 1.77" (45mm) Weight: 17.6 oz (0.50kg) Plug Type: Uni Plug Capacity: 3000mAh Cell Configuration: 7-Cell Hump Pack Voltage: 8.4V Amp Rating: 3 amps

VENOM 8.4V 3000mAh NiMH HUMP - EC3 Plug

Venom's most popular batteries are now equipped with the efficient EC3 plug. These 3.5mm high-performance plugs are popular in many applications and provide safe, error free connections. Choose from our 3000mah NiMH 6, 7, and 8 cell pack configurations or our 20c 4000mah and 5400mah LiPO packs. This battery is perfect for the new Venom King of Shaves C1 Electric racing boat! FEATURES: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 1.77" (45mm) Weight: 17.6 oz (0.50kg) Plug Type: EC3 Capacity: 3000mAh Cell Configuration: 7-Cell Hump Pack Voltage: 8.4V Amp Rating: 3 amps

VENOM 8.4V 3000mAh NiMh FLAT BATTERY - UNI Plug (1525-7)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your Venom 8.4V 3000mAh NiMH Flat Battery today! This all new 7-Cell Flat configuration features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 6.1" (155mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 17.6 oz (0.50kg) Plug Type: Uni Plug Capacity: 3000mAh Cell Configuration: 7-Cell Voltage: 8.4V Amp Rating: 3 amps

VENOM 7.2V 5000mAh NiMH BATTERY - UNI Plug (1548)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! The 5000 delivers the long runtime and punch necessary for peak performance. Built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: Uni plug Capacity: 5000mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 5 amps

VENOM 7.2V 4600mAh NiMH BATTERY - UNI Plug (1547)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! The 4600 delivers long runtime and punch necessary for peak performance. Built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya) and heavy gauge 12AWG silicone coated wire for performance and convenience. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: Uni plug Capacity: 4600mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 4.6 amps

VENOM 7.2V 4200mAh NiMH BATTERY - UNI Plug (1546)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! The 4200 delivers the long runtime and punch necessary for peak performance. Built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: uni plug Capacity: 4200mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 4.2 amps

VENOM 7.2V 3600mAh NiMH BATTERY - UNI Plug (1544)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! The 3600 delivers long runtime and punch necessary for peak performance. Built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: UNI Capacity: 3600mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 3.6 amps

VENOM 7.2V 3300mAh NiMH BATTERY - TRX Plug (1540T)

Built using the latest Quad Welding technology for superior strength and optimum power. Comes pre-fitted with a standard Tamiya type connector. Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: Traxxas Capacity: 3300mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 3.3 amps

VENOM 7.2V 300mAh NiMh BATTERY

Get your Venom 7.2V 300mAh NiMh battery pack today! Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: VENOM 7.2V 300mAh NiMh BATTERY For Use With: Venom Mantis 2-Channel Helicopter

VENOM 7.2V 3000mAh NiMH BATTERY - UNI Plug (1532)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! The 3000 delivers the RUN TIME and PUNCH demanded by RC Freaks. Built using the latest Quad Welding technology for superior strength and optimum power. Features the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire. FEATURES: SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: Uni plug Capacity: 3000mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 3 amps

VENOM 7.2V 3000mAh NiMH - EC3 Plug

Venom's most popular batteries are now equipped with the efficient EC3 plug. These 3.5mm high-performance plugs are popular in many applications and provide safe, error free connections. Choose from our 3000mah NiMH 6, 7, and 8 cell pack configurations or our 20c 4000mah and 5400mah LiPO packs. This battery is perfect for the new Venom King of Shaves C1 Electric racing boat! FEATURES: Battery Type: Nickel Metal Hydride (NiMH) Length: 5.39" (137mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 14.4 oz (0.41kg) Plug Type: EC3 Capacity: 3000mAh Cell Configuration: 6-Cell Voltage: 7.2V Amp Rating: 3 amps

VENOM 7.2V 1600mah 2/3A NiMH Battery w/TRX Plug

Designed to complement Traxxas 1/16 E Revo Brushless VXL and 1/16 Slash Brushless VXL. Available in 1600mah 7.2v for added run times or double your voltage using the Traxxas Series Connector to 14.4v with two batteries. Also available are our 2,000mah 7.4v and our 1,300mah 11.1v LiPO batteries. Unleash all the potential of your Traxxas 1/16 E-Revo or Slash with Venom's batteries. *Also compatible with other 1/16 - 1/18 vehicles. FEATURES: Designed to complement Traxxas 1/16 E Revo Brushless VXL and 1/16 Slash Brushless VXL. Available in 1600mah 7.2v for added run times or double your voltage using the Traxxas Series Connector to 14.4v with two batteries. Also available are our 2,000mah 7.4v and our 1,300mah 11.1v LiPO batteries. Unleash all the potential of your Traxxas 1/16 E-Revo or Slash with Venom's batteries. *Also compatible with other 1/16 - 1/18 vehicles.

VENOM 20C 8000mAh 7.4V LiPo - UNI Plug (15010)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Venoms new high power, high capacity Li-Power Series Lithium Polymer batteries: Whether youre looking to power an 8th scale buggy or a monster truck, you can count on our new high capacity LiPO packs to deliver. Choose from 2S 7.4V 5400mah, 3S 11.1V 6400mah and 2S 7.4V 8000mah. All three packs feature the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire, and JST HX 2.5 balance plug for performance and convenience. SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body FEATURES: * Battery Type: Lithium Polymer (LiPO) * Configuration: 2s2p * Weight: 16.5 oz. * Dimensions: 42.4 x 135 x 37.6mm * Charge Rate: 1C (8A) * Continuous Discharge: 25C (200A) * Min Discharge Volts Per Pack: 6V * Max Burst Rate: 35C (280A) * Max Volts Per Cell: 4.2V * Max Volts Per Pack: 8.4V

VENOM 20C 6400mAh 11.1V LiPo - UNI Plug (15009)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Venoms new high power, high capacity Li-Power Series Lithium Polymer batteries: Whether youre looking to power an 8th scale buggy or a monster truck, you can count on our new high capacity LiPO packs to deliver. Choose from 2S 7.4V 5400mah, 3S 11.1V 6400mah and 2S 7.4V 8000mah. All three packs feature the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire, and JST HX 2.5 balance plug for performance and convenience. SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body FEATURES: * Battery Type: Lithium Polymer (LiPO) * Configuration: 3s2p * Weight: 17.6 oz. * Dimensions: 44 x 137 x 42mm * Charge Rate: 1C (6.4A) * Continuous Discharge: 20C (128A) * Min Discharge Volts Per Pack: 9V * Max Burst Rate: 30C (192A) * Max Volts Per Cell: 4.2V * Max Volts Per Pack: 12.6V * Watt Hours: 59.84 * *NOTE - Will NOT fit Traxxas Bandit

Venom 20C 5400mAh 7.4V LiPO Battery - UNI Plug (15008)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Venoms new high power, high capacity Li-Power Series Lithium Polymer batteries: Whether youre looking to power an 8th scale buggy or a monster truck, you can count on our new high capacity LiPO packs to deliver. Choose from 2S 7.4V 5400mah, 3S 11.1V 6400mah and 2S 7.4V 8000mah. All three packs feature the New Venom Universal Plug System (fits Traxxas, Deans, EC3 & Tamiya), heavy gauge 12AWG silicone coated wire, and JST HX 2.5 balance plug for performance and convenience. SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body FEATURES: * Battery Type: Lithium Polymer (LiPO) * Configuration: 2s2p * Weight: 10.4 oz. * Dimensions: 44 x 133.5 x 23mm * Charge Rate: 1C (5.4A) * Continuous Discharge: 20C (108A) * Min Discharge Volts Per Pack: 6V * Max Burst Rate: 30C (162A) * Max Volts Per Cell: 4.2V * Max Volts Per Pack: 8.4V

VENOM 20C 5400mAh 11.1V LiPo - UNI Plug (1581)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your VENOM 20C 5400mAh 11.1V LiPo battery with New Venom Universal Connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. The New Venom Universal Plug System fits Traxxas, Deans, EC3 and Tamiya plugs, includes heavy gauge 12AWG silicone coated wire, and has a JST HX 2.5 balance plug for performance and convenience. Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: * 30% or more average runtime and 33% lighter than the comparable NiMH pack * Unique top/end power lead location allows for fitment in a wide range of chassis platforms * Durable case designed to protect the battery during extreme use * Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Lithium Polymer (LiPO) Length: 5.43" (138mm) Height: 1.89" (48mm) Width: 1.69" (42.5mm) Weight: 15.8 oz (0.44kg) Plug Type: Traxxas Capacity: 5400mAh Cell Configuration: 3-Cell Voltage: 11.1V C Rating: 20C C Burst Rating: N/A Amp Rating: 5.4 amps Amp Burst Rating: 162 amps Maximum Voltage Rate: 12.6V Discharge Rate: 108 amps Minimum Discharge Volts: 9V

VENOM 20C 5000mAh 7.4V 2-Cell R/C LiPo CAR BATTERY - UNI Plug (1555)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your VENOM 20C 5000mAh 7.4V LiPo R/C car battery with Venom Universal Connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. The New Venom Universal Plug System fits Traxxas, Deans, EC3 and Tamiya plugs, includes heavy gauge 12AWG silicone coated wire, and has a JST HX 2.5 balance plug for performance and convenience. Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: * 30% or more average runtime and 33% lighter than the comparable NiMH pack * Unique top/end power lead location allows for fitment in a wide range of chassis platforms * Durable case designed to protect the battery during extreme use * Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Lithium Polymer (LiPO) Length: 5.35" (136mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 1.21 lb (0.55kg) Plug Type: Traxxas Capacity: 5000mAh Cell Configuration: 2-Cell Voltage: 7.4V C Rating: 20C C Burst Rating: N/A Amp Rating: 5 amps

VENOM 20C 5000mAh 11.1V LiPo - UNI Plug (1582)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! VENOM 20C 5000mAh 11.1V LiPo battery with New Venom Universal Connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. The New Venom Universal Plug System fits Traxxas, Deans, EC3 and Tamiya plugs, includes heavy gauge 12AWG silicone coated wire, and has a JST HX 2.5 balance plug for performance and convenience. Get ultra fast shipping with your order today! Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! FEATURES: * 30% or more average run time and 33% lighter than the comparable NiMH pack * Unique top/end power lead location allows for fitment in a wide range of chassis platforms * Durable case designed to protect the battery during extreme use * Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body TECHNICAL SPECS: * Battery Type: Lithium Polymer (LiPO) * Length: 5.43" (138mm) * Height: 1.18" (30mm) * Width: 1.69" (42.5mm) * Weight: 15.8 oz (0.44kg) * Plug Type: Venom Universal Plug System * Capacity: 5000mAh * Cell Configuration: 3-Cell * Voltage: 11.1V * C Rating: 20C * C Burst Rating: N/A * Amp Rating: 5.0 amps * Amp Burst Rating: N/A * Maximum Voltage Rate: 12.6V * Discharge Rate: 108 amps * Minimum Discharge Volts: 9V

VENOM 20C 4000mAh 7.4V 2-Cell R/C LiPo CAR BATTERY - UNI Plug (1554)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your VENOM 20C 4000mAh 7.4V LiPo R/C car battery with Venom Universal Connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. The New Venom Universal Plug System fits Traxxas, Deans, EC3 and Tamiya plugs, includes heavy gauge 12AWG silicone coated wire, and has a JST HX 2.5 balance plug for performance and convenience. Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: * 30% or more average runtime and 33% lighter than the comparable NiMH pack * Unique top/end power lead location allows for fitment in a wide range of chassis platforms * Durable case designed to protect the battery during extreme use * Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Lithium Polymer (LiPO) Length: 5.35" (136mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 1.21 lb (0.55kg) Plug Type: Traxxas Capacity: 4000mAh Cell Configuration: 2-Cell Voltage: 7.4V C Rating: 20C C Burst Rating: N/A Amp Rating: 4 amps

VENOM 20C 4000mAh 11.1V LiPo - UNI Plug (1580)

NOW WITH VENOM UNIVERSAL PLUG SYSTEM! Get your VENOM 20C 4000mAh 11.1V LiPo battery with New Venom Universal Connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. The New Venom Universal Plug System fits Traxxas, Deans, EC3 and Tamiya plugs, includes heavy gauge 12AWG silicone coated wire, and has a JST HX 2.5 balance plug for performance and convenience. Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: * 30% or more average runtime and 33% lighter than the comparable NiMH pack * Unique top/end power lead location allows for fitment in a wide range of chassis platforms * Durable case designed to protect the battery during extreme use * Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) SPECS ON VENOM UNIVERSAL PLUG SYSTEM: * Today's four most common battery plugs, Tamiya, Traxxas, Deans and EC3 lack inter-connectivity between themselves. Venom's new revolutionary battery plug system features an easy to use, fool-proof interface that allows you to quickly convert batteries between any of the four most popular plug types. Venom Plugs deliver the power and flexibility you demand. One plug, four connections, one easy solution! * Four Option Connection System (Traxxas, Deans, Tamiya, EC3) * Reverse Polarity Protection * Low Resistance * High Conductivity * Silver Plated Connectors * Zytel High-Temp Plastic Plug Body Specifications: Battery Type: Lithium Polymer (LiPO) Length: 5.39" (137mm) Height: 1.77" (45mm) Width: 0.94" (24mm) Weight: 11 oz (0.31kg) Plug Type: Traxxas Capacity: 4000mAh Cell Configuration: 3-Cell Voltage: 11.1V C Rating: 20C C Burst Rating: N/A Amp Rating: 4.0 amps Amp Burst Rating: 120 amps Maximum Voltage Rate: 12.6V Discharge Rate: 80 amps Minimum Discharge Volts: 9V

VENOM 20C 3200mAh 7.4V 2-Cell R/C LiPo CAR BATTERY - TRX Plug (1553T)

Get your VENOM 20C 3200mAh 7.4V LiPo R/C car battery with Traxxas connector today! This battery is part of the new era of electric R/C batteries. Designed to compliment todays high demand needs for more power and capacity, including the new Traxxas Velineon Brushless Power System. Check out the long list of features below. Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! FEATURES: 30% or more average runtime and 33% lighter than the comparable NiMH pack Unique top/end power lead location allows for fitment in a wide range of chassis platforms 12-gauge silicone wire and Traxxas new High Current Connector Durable case designed to protect the battery during extreme use Includes balance connector JSTX42.5 3P (Same as Great Planes Electrify and Horizon Hobby E-Flite balance connector) Specifications: Battery Type: Lithium Polymer (LiPO) Length: 5.35" (136mm) Height: 0.94" (24mm) Width: 1.77" (45mm) Weight: 1.21 lb (0.55kg) Plug Type: Traxxas Capacity: 3200mAh Cell Configuration: 2-Cell Voltage: 7.4V C Rating: 20C C Burst Rating: N/A Amp Rating: 3.2 amps

VENOM 20C 2000mAh 7.4v 2-Cell LiPO Battery w/TRX Plug (15023)

Designed to complement Traxxas 1/16 E Revo Brushless VXL and 1/16 Slash Brushless VXL. Available in 1600mah 7.2v for added run times or double your voltage using the Traxxas Series Connector to 14.4v with two batteries. Also available are our 2,000mah 7.4v and our 1,300mah 11.1v LiPO batteries. Unleash all the potential of your Traxxas 1/16 E-Revo or Slash with Venom's batteries. *Also compatible with other 1/16 - 1/18 vehicles. Specifications: Battery Type: Lithium Polymer (LiPO) Configuration: 2s1p Weight: 3.88 oz. Dimensions: 18 x 34 x 90mm Charge Rate: 1C (40A) Continuous Discharge: 20C (40A) Min Discharge Volts Per Pack: 5.5V Max Burst Rate: 30C (60A) Max Volts Per Cell: 4.2V Max Volts Per Pack: 8.4V Watt Hours: 14.8

VENOM 20C 1300mAh 11.1V 3-Cell LiPO Battery w/TRX Plug (15024)

Designed to complement Traxxas 1/16 E Revo Brushless VXL and 1/16 Slash Brushless VXL. Available in 1600mah 7.2v for added run times or double your voltage using the Traxxas Series Connector to 14.4v with two batteries. Also available are our 2,000mah 7.4v and our 1,300mah 11.1v LiPO batteries. Unleash all the potential of your Traxxas 1/16 E-Revo or Slash with Venom's batteries. *Also compatible with other 1/16 - 1/18 vehicles. Specifications: Battery Type: Lithium Polymer (LiPO) Configuration: 3s1p Weight: 4.6 oz. Dimensions: 16 x 30 x 94mm Charge Rate: 1C (1.3A) Continuous Discharge: 20C (26A) Min Discharge Volts Per Pack: 8.25V Max Burst Rate: 30C (39A) Max Volts Per Cell: 4.2V Max Volts Per Pack: 12.6V Watt Hours: 14.43

VENOM 10.8v 9-CELL 650mAh NiMh BATTERY

Get your Venom 10.8v 9-Cell 650mAh NiMh battery pack today! Don't run out of power in the middle of a big day! Always be ready with extra Venom remote control accessories, such as rechargeable LiPo, Ni-Cd, and Ni-Mh battery packs, and chargers! Get ultra fast shipping with your order today! FEATURES: VENOM 10.8v 9-CELL 650mAh NiMh BATTERY For Use With: Venom Night Ranger 3D Helicopter

VENOM 1.2V 2400mAh RECHARGEABLE "AA" BATTERIES (4-pcs)

Get your Venom 1.2V 2400mAh AA rechargeable 4-packs today! Tired of constantly buying disposable alkaline batteries? Venom Power Rechargeable NiMH AA Batteries have 2400mAh of power and are terrific for Transmitters, Receiver power, Cameras and more!

OM 20C 1300mAh 11.1V 3-Cell LiPO Battery w/TRX Plug (15024)

TRAXXAS NITRO 4-TEC 3.3 RTR w/2.4Ghz Radio

Unleashed Speed! 70+mph! Now Includes TQ 2.4Ghz Radio System with Traxxas Link! This is the NEW Bonus Edition from Traxxas that comes with 7.2V Battery & Charger for EZ-Start, Extra Glow Plug, Fuel Bottle, and Precision Tools FREE! Don't Blink or you'll Miss It! Combine the Extreme Power of the TRX 3.3 Racing Engine with an asphalt-hugging, lightweight chassis, and a raging fury of wickedly fast acceleration and supersonic speed is unleashed. Its the fastest, and most-powerful Ready-To-Race model ever created, the 70+mph Nitro 4-Tec 3.3. Peg the throttle and all four tires claw for traction as Nitro 4-Tec 3.3 re-writes the record books and breaks through the 70mph barrier. In the asphalt jungle, Nitro 4-Tec 3.3 is the reigning king. The TRX 3.3 Racing Engine delivers peak horsepower with a factory-installed performance-tuned aluminum pipe thats been beautifully blue-anodized and laser etched. Nitro 4-Tec 3.3 didnt take any shortcuts to the top. New precision hex hardware adds high-tech flair and makes servicing easy. The new ball-bearing equipped bellcrank steering system tightens the response for expert handling. The efficient 3-belt drive system has been enhanced for the extra speed and power with larger pulleys and a wider rear belt. Click picture to enlarge The look of power is unmistakable. Nitro 4-Tec has hot new look with complex, innovative body graphics that reflect the style and speed of the underlying chassis. New grey parts and white powder-coated springs brighten the chassis and make it easier to appreciate the detailed engineering that makes it all work. The 2.0 Mesh wheels offer classic styling that withstands the test of time. Of course, the most exciting appearance feature is the sight of the giant TRX 3.3 machined cooling head thrusting itself above the body. Powerful New Look The Nitro 4-Tec 3.3 (#4807) now includes the Traxxas TQ 2.4GHz High Output radio system with Traxxas Link.Next-Generation Traxxas 2.4GHz Technology.This new system offers the unbeatable convenience of no channels, no crystals 2.4Ghz technology, and the long-range security of a high-output signalbut thats just the beginning. The new, patent-pending Traxxas Link technology stores settings for up to 20 Traxxas Link-enabled models, with no naming or model memory settings required. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQ 2.4GHz High Output radio is also fully adjustable; steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. FEATURES: TRX 3.3 Racing Engine 60% more peak horsepower than the TRX 2.5 Bigger piston and sleeve delivers extreme power Consistent and smooth throughout the entire power band Backed by Traxxas Lifetime Engine Replacement Plan 70+mph top speed Resonator laser-etched, blue-anodized aluminum tuned pipe Precision metric hex hardware throughout New ProGraphix body graphics available in red, blue, white and black Ultra-precise ball bearing bellcranks Gray molded chassis components and shock bodies Enclosed receiver box protects the receiver from dirt and fuel spills Widened rear belt and larger pulleys Rubber-sealed ball bearings throughout Blue-anodized aluminum antenna crimp nut Three-belt all-wheel-drive system Adjustable 2-speed auto-shifting transmission 200mm wide Ultra-low center of gravity (CG) Fuel tank is centrally mounted for superior balance 2.0-inch nylon mesh wheels (bright, aluminum finish) Pre-glued racing tires with contoured inserts Reactive caster capability and adjustable caster angle Full turnbuckles Adjustable ride height Fully-countersunk aluminum chassis Engine and engine mount are a structurally integrated Front upper and lower suspension arms Planetary gear differentials with bearing supported shafts Traxxas Support Included full-color manual and tuning DVD Parts and service availability from almost 2,000 hobby dealers worldwide E-mail and toll-free phone support accessibility Requires: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel Peak or Timed Charger for 7.2V Battery 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: Top Speed: 70+mph Length: 17 Inches (432mm) Front Track: 7.64 Inches (194mm) Rear Track: 7.8 Inches (198mm) Weight (no fuel): 65.25oz (4.08lb) (w/4AA's) Height (overall): 4.38 Inches (111mm) Wheelbase: 10.16 Inches (258mm) Front Shock Length: Short Rear Shock Length: Short Front Wheels: 2.0 Inch Nylon Mesh Rear Wheels: 2.0 Inch Nylon Mesh Front Tires: Pre-glued with contoured inserts Rear Tires: Pre-glued with contoured inserts Transmission: Auto Two-Speed Gear Ratio (1st Gear): 3.00 Gear Ratio (2nd Gear): 2.16 Steering: Bellcrank Differential Type: Planetary Drive System: Belt-Driven AWD Chassis Type: 2.5mm Plate, 6061-T6 Aluminum Radio System: NEW TQ 2.4GHz Transmitter and Receiver with Traxxas Link Engine (fuel-powered): TRX 3.3 Racing Engine with EZ-Start Brake Type: Disc Fuel Tank Capacity: 75cc ACCESSORIES & EXTRAS: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel Peak or Timed Battery Charger (6-7 cell) Alkaline Batteries for Transmitter & Receiver (12 needed) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge

TRAXXAS JATO 3.3 NITRO STADIUM TRUCK w/2.4Ghz Radio

Brutally Fast! 0-60 in 4.2 seconds! Now Includes TQ 2.4Ghz Radio System with Traxxas Link! We have the NEW Traxxas Bonus Edition that also comes with 7.2V Battery & Charger for EZ-Start, Extra Glow Plug, Fuel Bottle, and Precision Tools FREE! Brutally Fast Its the only way to describe it. Combine the insane power of the TRX 3.3 Racing Engine with the awesome Traxxas Jato and the results will leave you speechless. Stunning, acceleration and face-distorting top speed launch Jato performance into the stratosphere. Its a power packed combination for excitement. Bury the throttle and 60mph flies by in a mere 4.2 seconds. Top speed is over 65mph! 2nd gear wheelies? You bet! It has an integrated wheelie bar included! Real World Street Fighter Jato 3.3s serious two-speed muscle power blows away typical purpose-built on-road cars, yet its suspension is versatile enough to take on the harsh realities of real-world pavement. Expansion joints, rocks, and even jumps are no problem for Jatos class-leading suspension travel. The big sticky Anaconda 2.8" treads and adjustable sway bars give Jato 3.3 tight, streetwise reflexes that dont require a mirror-smooth race course. When the pavement ends, Jato just keeps going. Its race-truck heritage gives it incredible off-road capability. If you want to get serious at the dirt track, a simple tire change and Jatos TRX 3.3 Racing Engine belts out more muscle than most tracks can even hold. Bred for Speed Jato is loaded with the advanced engineering DNA of the innovative Revo. From the TRX 3.3 Racing Engine to the high-grade metric hex hardware, every component and adjustment is optimized for performance, speed, and durability. The blue-anodized aluminum tuned pipe extracts maximum horsepower from the engine. The advanced two-speed transmission is backed with the patent-pending Torque-Control slipper clutch. The semi-metallic brake disc; smooth, Revo-spec GTR shocks; and precision, zero bump-steer suspension geometry, combine with a wide array of adjustment and tuning options for unparalleled driving control. Even starting the engine focuses on speed and performance. The TRX 3.3 Racing Engine has the convenience of Traxxas EZ-Start push-button electric starting. It includes built-in diagnostics to monitor your glow plug condition and starting functions. Theres no easier, safer, or faster way to start the engine. Next-Generation Traxxas 2.4GHz Technology The Jato 3.3 now includes the Traxxas TQ 2.4GHz High Output radio system with Traxxas Link. This new system offers the unbeatable convenience of no channels, no crystals 2.4Ghz technology, and the long-range security of a high-output signalbut thats just the beginning. The new, patent-pending Traxxas Link technology stores settings for up to 20 Traxxas Link-enabled models, with no naming or model memory settings required. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQ 2.4GHz High Output radio is also fully adjustable; steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. FEATURES: Best-in-class acceleration, 0-60mph in less than 4.2 seconds! Best-in-class top speed, 65+ mph! The TRX 3.3 Racing Engine provides extreme power, brutal speed, and furious wheelie action. Resonator blue-anodized aluminum tuned pipe is engineered with precision to enhance the performance of the TRX 3.3 Racing Engine. Front & rear sway bars provide superior handling and stability. Super-sticky 2.8-inch Anaconda performance tires deliver asphalt-hugging street traction. So fast, that the included wheelie bar is mandatory. Incredible body graphics match the performance and speed of Jato 3.3. Best in class suspension travel, 12mm more than other 2WD racing trucks! Adjustable internal two-speed allows unmatched acceleration and top speed without compromise. Sealed gearbox protects the two-speed and other sensitive transmission components from dirt and rocks. Our engineers went to extreme lengths to develop the unique bellcrank steering system geometry that completely eliminates bump steer. An integrated servo saver protects the steering servo. Sealed, limited-slip gear differential is fully tunable with standard silicone differential oils. Ball differentials simply cant compete for tunability, efficiency and reliability. Revo-style Torque-Control slipper clutch uses semi-metallic pads and heat-dissipating finned aluminum alloy pressure plates for smooth linear engagement and consistent traction control. The semi-metallic brake disk provides smooth stopping power and virtually eliminates fade caused by heat build-up. The Traxxas EZ-Start incorporates our latest revision of component and design technology to assure the most reliable operation. It is the only starting system to provide true, one-handed push-button engine starting. On-board diagnostics instantly troubleshoot any potential starting problems. EZ-Start is the safest and easiest starting system available. The low-profile 75cc fuel tank is mounted in the center of the chassis to promote superior chassis balance and handling dynamics. True constant-velocity U-joint driveshafts use rubber seals to maintain smooth, trouble-free performance. These operate at the most extreme deflection angles and allow for the most suspension travel. Optional metal constant velocity driveshafts are available that reduce rotating mass for racing conditions. Tough, 3mm thick 6061 aluminum chassis plate is fully countersunk on the bottom, including the engine mounting screws. The TRX 3.3 Racing Engine is mounted in the middle of the chassis allowing near perfect side-to-side weight distribution. Double-shear connections are used on critical suspension linkage to prevent separation in a collision. Removable roll hoop helps protect critical chassis components and serves as a convenient carry handle. Precision GTR (Revo-style) shocks with composite bodies provide smooth, consistent damping performance. Threaded shock bodies allow precise ride height adjustment. Integrated buggy style dirt guards join with the body to form a tightly sealed barrier against dirt and rocks. Enclosed radio box protects sensitive electronics from dirt and fuel spills. Jatos exclusive 2-position receiver battery mounting (mid and rear) provides additional tuning options. Precision metric hex hardware is used throughout. Jato offers full suspension adjustability including caster, camber, toe, anti-squat, ride height, weight bias, and roll-center Set-up DVD and full-color manual are included. Requires: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: Top Speed: 65+mph Length: 16.53 (420mm) Inches Front Track: (327mm) 12.87 Inches Rear Track: (330mm) 13.00 Inches Weight (no fuel): 83.03oz (5.19lb) (w/4AA in rear + wheelie bar) Height (overall): (145mm) 5.70 Inches Wheelbase: 11.22" Long (285mm); 11.14" Short (283mm) Wheel Diameter: (72.4mm) 2.85 Inches Tire Diameter: (105mm) 4.13 Inches Front Wheels: 2.8 All-Star Mirror-Chrome Rear Wheels: 2.8 All-Star Mirror-Chrome Front Tires: Anaconda (105mm) 4.1 Inches Rear Tires: Anaconda(105mm) 4.1 Inches Gear Ratio (1st Gear): 9.77:1 (total gear reduction) Gear Ratio (2nd Gear): 7.29:1 (total gear reduction) Gear Pitch: 32 (0.8 Module) Front Shock Length:(87mm) 3.43 Inches , GTR Aluminum Rear Shock Length: (87mm)3.43 Inches , GTR Aluminum Engine (fuel-powered): TRX 3.3 Racing Engine Brake Type: Semi-Metallic Disc with Steel Pads Steering: Bellcrank w/ Integrated Servo Saver Transmission: Auto Two-Speed Differential Type: Hardened-Steel Bevel Gear, Sealed Drive System: Shaft-Driven 2WD Chassis Type: 3mm Plate, 6061-T6 Aluminum Radio System: NEW TQ 2.4GHz Transmitter and Receiver with Traxxas Link Fuel Tank Capacity: 75cc ACCESSORIES & EXTRAS: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel Alkaline Batteries for Transmitter & Receiver (12 needed) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge

TRAXXAS T-MAXX 3.3 4WD NITRO MONSTER TRUCK

The T-Maxx 3.3 is stronger, bigger, and meaner right down to its monster core. Hardcore nitro monster crushing continues to evolve and so does T-Maxx. 4x4 fun starts with T-Maxx monster truck. When T-Maxx launched onto the scene a whole new world of R/C driving emerged. T-Maxx has become the world's best-selling Ready-To-Race nitro monster truck by, jumping, and ripping through terrain that others simply wouldn't dare to attempt. Introducing the T-Maxx 3.3. This brutal Maxx responds to the call with a huge stance; a tougher backbone; and wicked, tire-searing performance. T-Maxx brings it all together and unlocks a whole new level of thrashing potential. Go faster, jump higher, and let your creativity find new forms of torturous off-road pounding. Click picture to enlarge Key Features: Includes: TQ 2.4GHz high-output radio system with Traxxas Link, EZ-Start battery pack, charger, and more TRX 3.3 Racing Engine with EZ-Start electric starting Tall 6.3" all-terrain Maxx-sized tires mounted on 3.8" mirror-chrome Hurricane wheels Maxx Resonator dyno-tuned dual-chamber pipe Sealed, tunable limited-slip differentials Digital high-torque steering servo delivers Revo-Spec forward-only, autoshifting two-speed transmission Torque-Control slipper & powerful 42mm disc brake Click picture to enlarge Specifications: Type: Nitro 4WD Monster Truck Scale: 1/10 Length: 21.2 in (539mm) Width: 16.5 in (417mm) Wheelbase: 13.2 in (335mm) Tire Type: Chrome Hurricane Weight: 10 lbs (4.5kg) Chassis: Extended Chassis 4mm 6061-T6 Aluminum Drivetrain: Shaft-Driven Motor or Engine: TRX 3.3 Radio: Traxxas TQ 2.4GHz High Output with Traxxas Link (3-Channel) Wheel Size: 3.8" Kit/RTR: RTR Fuel Tank Capacity: 125cc

TRAXXAS REVO 3.3 NITRO MONSTER TRUCK w/2.4Ghz RADIO & REVERSING TRANSMISSION

NEW FEATURES! *TQ 2.4GHz Radio System * OptiDrive Reversing Transmission * Rechargeable Receiver and EZ-Start Batteries Included! * Bigger, Tougher, More Versatile Than Ever! Are you thinking you want to go NITRO? Total domination on the track and seven National Championships have proven the value of Revos overwhelmingly superior engineering and innovation. All the race-engineered features that make Revo a winner on the track also make it the ultimate platform for all your monster truck fun. Revo durability is second to none, and with the long travel rockers installed, Revo has the most suspension travel of any monster truck. Experience the ultimate Ready-To-Race performance machine. Introducing the biggest, toughest, most versatile Revo 3.3 yet! The absolute best of monster truck performance, Revos advanced design is an engineering marvel that turned the world of R/C upside down with its completely unique chassis and suspension configuration. Todays Revo 3.3 combines performance with incredible all-terrain ability and a wider, tougher stance for maximum monster fun. With the heavy-duty reversing transmission the Revo 3.3 can back out of tight spots, while the OptiDrive Electronic Transmission Control guarantees safe, smooth engagement every time. The new TQ radio system keeps you in complete control with the latest 2.4GHz technology for no crystals-required reliability and convenience. New Geode chrome wheels with 17mm hex hubs wear massive 6.3 Maxx-sized tires for total traction in all conditions, and Revo 3.3s dual-servo steering system provides powerful, responsive handling. Traxxas heavy-duty 2075 servos combine digital circuitry, a ball-bearing gear train, and waterproof case for the ultimate in precision and reliability. And of course, the new Revo 3.3 is 100% Ready-To-Raceeven rechargeable NiMH packs for the receiver and EZ-Start system are included! Included Accessories: 1200mAh 5-cell receiver battery 1500mAh 6-cell EZ-Start pack Fuel filler bottle Extra glow plug Extra oiled air filter Long travel rockers & springs Key Features: Wide-track body with custom graphics TQ 2.4Ghz 3-channel radio system 1200mAh RX pack and 1500mAh EZ-Start batteries included Battery chargers included High flow dual-stage air filter Polished Resonator dual chamber tuned pipe Heavy-duty reversing OptiDrive transmission TRX 3.3 Racing Engine with Resonator tuned pipe 45+mph top speed 17mm hex Geode mirror-chrome wheels with pre-glued on 6.3" Maxx-Sized tires Large capacity 150cc fuel tank Dual 2075 digital high-torque ball bearing servos Hard-anodized Teflon-coated GTR shocks Oversized wheel bearings & reinforced axle carriers RX box includes 5-cell flat rechargeable RX pack Super-duty sealed driveshafts Installed progressive 2 long travel rockers EZ-Start electric starting system (battery included) Specifications: Length: 20.650in (525mm) Width: Front: 16.378in (416mm) Rear: 16.476in (418.5mm) Wheelbase: 13.7in (348mm) Weight: RTR no fuel: 9.8lbs (4.448Kg) Chassis: 3mm 6061-T6 Aluminum Suspension: Fully Independent Progressive 2 Rockers Tire Type: Talon 5.75in X 3.8in Front & Rear Motor or Engine: TRX 3.3 Racing Engine Radio: TQ-3 (3 channel) 2.4Ghz Fuel Tank Capacity: 125cc Needed To Complete: AA Batteries (8)- FUG8 Fuel Click picture to enlarge

TRAXXAS NITRO STAMPEDE RTR MONSTER TRUCK

The Pit Bull of R/C Monster Trucks! Monster Performance! The Nitro Stampede builds on the legendary ruggedness and performance that has made the Stampede name synonymous with monster truck fun. When youre ready to go faster and run longer, nitro power is the next step. Nitro Stampede combines TRX Pro.15 Nitro Power with tall, drive-over-anything ground clearance for hour after hour of intense wheelie-popping, rock-crushing action. Just fuel it, start it, and drive it! Traxxas makes it easy for Nitro Stampede to feed your hunger for brutal, rock-spitting, dirt-chewing horsepower. Are you thinking you want to go NITRO? Its hard to beat the sound and smell of a NITRO motor. The Nitro Stampede now comes equipped with mirror-chrome All-Star 2.8 wheels wrapped with pre-glued Talon all-terrain tires. The smooth-running Revo-Spec Talon tread pattern provides incredible grip on hard-packed surfaces, tears through rocks and gravel, and kicks up giant roosts of dirt off-road. Performance-tuned foam inserts provide extra stability. The all-new body design sports an aggressive stance and tough new graphics that tell the world this truck is serious about its mission. New gray-molded parts tastefully compliment the look of the chassis. Pound-for-pound, Nitro Stampede is one of the meanest, toughest, and best-looking R/C monster trucks ever created. Nitro Stampede will easily earn its place as your first choice for exciting, wheelie-popping nitro action. Fuel it. Start it. Drive it! Traxxas pioneered the concept of ready-to-run nitro monster trucks and we have been perfecting them ever since (for nearly 15 years). Nitro Stampede makes your move to nitro power easy. Professional Traxxas factory assembly along with our exclusive EZ-Start push-button electric engine starting gets you running just minutes out of the box. No other starting system is safer or more convenient. A separate glow driver is not required. The EZ-Start system heats the glowplug for you, automatically. Nitro Stampedes TRX Pro.15 engine delivers proven power and reliability, and features a precision two-needle carburetor. High output is delivered over a wide range of conditions. The wide tuning latitude makes the TRX Pro.15 very forgiving so it stays running and idles smoothly as you learn how to perfect the tune and optimize the performance. The Pit Bull of R/C Monter Trucks! Nitro Stampede has earned its reputation for performance and durability with features like the tough chassis design that combines lightweight composite materials with the engine-cooling properties of 6061-T6 aluminum. The unique dual-plane design provides maximum center ground clearance, a true monster truck stance, and is extra rigid to resist chassis flex. The Magnum 375 transmission is specially geared for monster truck torque and is equipped with an adjustable slipper clutch to control traction. The factory-installed planetary differential features hardened steel gears and never needs adjusting! The long-travel independent suspension, powerful disc brake, and responsive high-torque steering servo work together for smooth control. Rubber sealed ball bearings and oil-filled Ultra Shocks with the superior sealing of Traxxas X-ring technology keep maintenance duties to an absolute minimum. Nitro Stampede quickly builds your confidence and driving skill as it tackles extreme terrain that other trucks wouldnt dare attempt. FEATURES: Powerful, TRX Pro.15 engine Full ball bearings Amazing new body, new ProGraphix paint scheme TRX All-Star 2.8" chrome wheels Pre-glued Talon tires Powder coated white springs with gray shock bodies New gray molded composite parts compliment the look of the chassis EZ-Start electric starter Dual exhaust system Double deck T6 aluminum and composite chassis Magnum 375 transmission with ball bearings Adjustable, easy-to-change gear ratios Planetary differential with steel gears Powerful disc brake Telescoping, U-joint driveshafts X-Tra long, high-volume, oil-filled gray Ultra Shocks Requires: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 7.2V Stick NiCd or NiMh Battery for Traxxas EZ Start System Peak or Timed Charger for 7.2V Battery 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: Length: 17 Inches (432mm) Front Track: 12.75 Inches (324mm) Rear Track: 12.75 Inches (324mm) Weight (no fuel): 83.2oz (2.35kg) Height (overall): 9.5 Inches (241mm) Wheelbase: 10.75 Inches (273mm) Front Shock Length: Long Rear Shock Length: XXLong Front Tires: Talon 2.8" Rear Tires: Talon 2.8" Front Wheels: 2.8" Mirror-Chome (All-Star) Rear Wheels: 2.8" Mirror-Chome (All-Star) Gear Ratio (internal): 3.75 Differential Type: Planetary Gear Pitch: 32-Pitch Transmission: Magnum 375 Drive System: Shaft-Driven 2WD Steering: Single Point Chassis Type: Double-Decked Chassis Material: T6 Aluminum / Composite Radio System: Traxxas TQ (2-Channel) Engine (fuel-powered): TRX Pro.15 with EZ-Start Brake Type: Disc Fuel Tank Capacity: 75cc Top Speed: 33+mph ACCESSORIES & EXTRAS: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 7.2V NiCd or NiMh Stick Battery Pack (1 needed) Peak or Timed Battery Charger (6-7 cell) Alkaline Batteries for Transmitter & Receiver (12 needed) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge

TRAXXAS NITRO SPORT 2WD STADIUM TRUCK

Its Easy to Get Started With Genuine Traxxas Nitro Power! This is the NEW Bonus Edition from Traxxas that comes with 7.2V Battery & Charger for EZ-Start, Extra Glow Plug, Fuel Bottle, and Precision Tools FREE! Are you thinking you want to go NITRO? Thats a great choice! you cant beat the sound and smell of a NITRO motor. Now with an aggressive new look, Nitro Sport is the easiest, most affordable way to get into nitro power with a full-featured, high-performance Ready-To-Race model. Traxxas pioneered the concept of ready-to-run nitro trucks and we have been perfecting them for over 20 years. Nitro Sport is fast, easy-to-use, and loaded with performance. Traxxas professional factory assembly along with our exclusive EZ-Start push-button electric engine starting gets you running just minutes out of the box. Part of the fun of nitro is learning how to tune the engine and watching as small fuel mixture adjustments reward you with huge performance gains. Nitro Sports TRX Pro.15 engine delivers proven power and reliability, and features a precision two-needle carburetor that delivers high output over a wide range of conditions. The wide tuning latitude makes the TRX Pro.15 very forgiving so it stays running and idles smoothly as you learn how to perfect the tune and optimize the performance. Genuine Traxxas Nitro Performance Beyond Your Expectations Youre going nitro so you expect top performance. Nitro Sport delivers with spectacular acceleration and top speeds of 38+mph! Its made even better with the sound and smell of real nitro horsepower. Nitro Sport is a drivers machine that is fully equipped for the race-track with features such as the adjustable slipper clutch, long-travel independent suspension with tunable oil-filled Ultra Shocks, full ball bearings, powerful disc brake, and responsive single-point steering. Nitro Sport's sophisticated chassis combines lightweight composite materials with the engine cooling properties of T6 aluminum. The dual-plane layout is extra rigid for consistent, rugged performance. The precision handling helps you become a better driver, however crashes and mishaps are inevitable as driving skills develop with the increased speed of nitro. Nitro Sport is built Traxxas-Tough to prevent breakage and keep you driving. With a wide variety of compatible parts and accessories available from your hobby dealer, Nitro Sport is easy to repair or customize. FEATURES: 38+mph top speed Aggressive new body design with bolt-on rear wing Mirror-chrome Twin-Spoke 2.8" wheels and Alias racing tires with foam inserts 5-color ProGraphix body artwork. No painting required! TRX Pro.15 engine with the exclusive EZ-Start electric starting system Two-needle aluminum carburetor Tough fiber-composite and T6 aluminum construction Adjustable slipper clutch Tuned pipe exhaust system X-Tra long, fiber-composite, suspension arms Magnum 281 transmission X-Tra long, high-volume, oil-filled Ultra Shocks Powerful disc brake Traxxas Support Adjustable, easy-to-change gear ratios Telescoping, U-joint driveshafts Planetary differential with steel gears Complete set of rubber-sealed ball bearings Detailed manual included Parts and service availability from almost 2,000 hobby dealers worldwide E-mail and toll-free phone support accessibility Requires: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 7.2V Stick NiCd or NiMh Battery for Traxxas EZ Start System Peak or Timed Charger for 7.2V Battery 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: Length: 17.25 Inches (438mm) Front Track: 12.5 Inches (318mm) Rear Track: 12.38 Inches (314mm) Weight (no fuel): 62oz (1.79kg) Height (overall): 6 Inches (152mm) Wheelbase: 11.31" Long (287mm) Front Shock Length: Long Rear Shock Length: XXLong Front Tires: Alias Ribbed 2.8" Rear Tires: Alias Step-Pin 2.8" Front Wheels: 2.8" Twin-Spoke Chrome Rear Wheels: 2.8" Twin-Spoke Chrome Gear Ratio (internal): 2.81 Differential Type: Planetary Gear Pitch: 32-Pitch Transmission: Magnum 281 Drive System: Shaft-Driven 2WD Steering: Single Point Chassis Type: Dual Plane Chassis Material: T6 Aluminum / Composite Radio System: Traxxas TQ (2-Channel) Engine (fuel-powered): TRX Pro.15 w/ EZ-Start & Slipper Clutch Brake Type: Disc Fuel Tank Capacity: 75cc Top Speed: 38+mph ACCESSORIES & EXTRAS: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 7.2V NiCd or NiMh Stick Battery Pack (1 needed) Peak or Timed Battery Charger (6-7 cell) Alkaline Batteries for Transmitter & Receiver (12 needed) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge

TRAXXAS NITRO RUSTLER RTR w/2.4Ghz Radio

Hard-Charging 50+mph Performance! Now Includes TQ 2.4Ghz Radio System with Traxxas Link! This is the NEW Bonus Edition from Traxxas! It comes with 7.2V Battery & Charger for EZ-Start, Extra Glow Plug, Fuel Bottle, and Precision Tools FREE! Top Speed & Performance! The Nitro Rustler 2.4Ghz is the first name in high performance 2WD nitro stadium trucks. Powered by the proven performance of the TRX 2.5 Racing Engine, Nitro Rustler totally out-muscles the competition with top speeds beyond 50 mph! The TRX 2.5 also pumps out the torque for brutal, wheel-standing launches and absolutely ruthless acceleration. The all-new body design cheats the wind with its smooth curves and low-slung stance, while the outrageous new graphics dominate with style. The separate wing securely bolts to the new body with precise aluminum hex hardware. Chrome 2.8 Twin Spoke rims are wrapped with pre-glued Alias step-pin tires in the rear and Alias ribbed tires up front. The high-tech rubber compound ensures great grip on a variety of surfaces. New grey-molded composite parts are thoughtfully integrated to enhance the look of the chassis. Fast, light, and loaded with power, Nitro Rustlers power-sliding, dirt roosting attitude will have you reaching for the throttle again and again. The Most Horsepower Best Nitro Engine --RC Car Action Magazine Readers Choice Award Nitro Rustlers TRX 2.5 Racing Engine is nothing short of amazing. It is the most advanced engine in its class and comes loaded with all the hottest performance hardware. The two-needle composite slide carburetor, trick porting, and free-flowing rear exhaust deliver class-leading horsepower and high-revving speeds over 50mph. Plus only Traxxas has the true push-button starting convenience and safety of the EZ-Start Electric Starting System. Traxxas makes nitro easy so that anyone can experience the hard-charging action and intense driving excitement Nitro Rustler delivers. Hammer the throttle anywhere in the power band and Nitro Rustler responds with searing acceleration and the sound of pure, high-revving nitro power. Built Traxxas Tough Nitro Rustler is not only built to perform with its adjustable slipper clutch, disc brake, and race-inspired suspension geometry, its also built Traxxas Tough for all-day driving fun. Nitro Rustlers robust design keeps annoying breakage to a minimum so that the action can keep going on and on. The rugged 6061-T6 aluminum chassis forms a rock-solid backbone that also draws heat away from the engine. Full rubber-sealed ball bearings provide the ultimate protection and low maintenance for nitro environments. The Magnum 281 transmission uses a planetary gear differential with built-to-last hardened steel gears. The gear diff requires no time-consuming adjustment and is virtually maintenance free. The oil-filled Ultra Shocks use exclusive X-ring seal technology for reduced friction and superior leak resistance. Traxxas engineers are dedicated to keeping you on the throttle, not on the workbench. Next-Generation Traxxas 2.4GHz Technology The Nitro Rustler now includes the Traxxas TQ 2.4GHz High Output radio system with Traxxas Link. This new system offers the unbeatable convenience of no channels, no crystals 2.4Ghz technology, and the long-range security of a high-output signalbut thats just the beginning. The new, patent-pending Traxxas Link technology stores settings for up to 20 Traxxas Link-enabled models, with no naming or model memory settings required. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQ 2.4GHz High Output radio is also fully adjustable; steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. FEATURES: TRX 2.5 Racing Engine New low-profile body, new ProGraphix paint scheme Alias tires pre-glued on Twin-Spoke wheels Powder coated white springs with gray shock bodies Bolt-on rear wing with aluminum hardware Rubber-sealed ball bearings EZ-Start electric starting system Tuned pipe exhaust system Double deck 6061-T6 aluminum and composite chassis Magnum 281 transmission with ball bearings Adjustable, easy-to-change gear ratios X-Tra long, fiber-composite, suspension arms Planetary differential with steel gears Powerful disc brake Telescoping, U-joint driveshafts X-Tra long, high-volume, oil-filled Ultra Shocks Now Includes: Traxxas 2.4Ghz LINK Radio System; 7.2V Battery & Charger for EZ-Start; Extra Glow Plug; Fuel Bottle; and Precision Tools Requires: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 12 "AA" Alkaline Batteries for Transmitter (8) & Receiver (4) Misc. Nitro Accessories, such as Tuning Screwdriver, After-Run Oil, & Other Track Equipment TECHNICAL SPECS: Top Speed: 50+mph Length: (438mm)17.25 Inches Front Track: (318mm)12.5 Inches Rear Track: (314mm)12.375 Inches Weight (no fuel): (2kg)73oz Height (overall): (152mm)6 Inches Wheelbase: (287mm) 11.312" Long Front Shock Length: Long Rear Shock Length: XXLong Wheel Diameter: (72.4mm)2.8" Tires: (105mm)4.1" Front Tires: Alias Ribbed 2.8" Rear Tires: Alias Step-Pin 2.8" Front Wheels: 2.8" Twin-Spoke Chrome Rear Wheels: 2.8" Twin-Spoke Chrome Gear Ratio (internal): 2.81 Differential Type: Planetary Gear Pitch: 32-Pitch Transmission: Nitro Magnum 281 Drive System: Shaft-Driven 2WD Driveshafts: Keyed Telescoping U-Joint Steering: Bellcrank Chassis Type: Double-decked Chassis Material: 6061-T6 Aluminum Radio System: NEW TQ 2.4GHz Transmitter and Receiver with Traxxas Link Engine (fuel-powered): TRX 2.5 Racing Engine with EZ-Start Brake Type: Disc Fuel Tank Capacity: 75cc ACCESSORIES & EXTRAS: Nitro Fuel - (10-20% recommended) such as Traxxas Top Fuel 7.2V NiCd or NiMh Stick Battery Pack (1 used) Peak or Timed Battery Charger (6-7 cell) Alkaline Batteries for Transmitter & Receiver (12 needed) Misc. Nitro Accessories, such as Fuel Bottle, Tuning Screwdriver, After-Run Oil, & Other Track Equipment Click picture to enlarge