Lightweight Spektrum AR6100e receiver with DSM2 technology
Two feather-light S60 Super Sub-Micro servos--just 6.0 grams each
DC Li-Po balancing charger and convenient AC adapter
2S 7.4V 800mAh Li-Po battery pack with charge protection circuitry
Co-axial, counter-rotating rotor blades that make hovering easy for first-time pilots
100% factory assembled and test flown--no assembly or difficult setup required
Compatible with most Blade CX2 option parts
Optional LED navigational light set sold separately (EFLH2009 or EFLH2009R).
Overview
The flight experts have done it again. The Blade® CX3 MD 520N® RTF gives pilots unbelievable micro-heli excitement. The CX3 includes a radio system equipped with Spektrum™ 2.4GHz DSM2™ technology in the LP5DSM transmitter and Spektrum AR6100e receiver, providing 5-channel control with interference-free flying. It’s covered in the licensed MD 520N scale body with an attractive police trim scheme.
Just like its predecessor, the Blade CX3 offers first-time heli pilots exceptional stability and incredible control through the coaxial, counter-rotating head design and 3-in-1 control unit. In addition, this CX3 also features two feather-light S60 Super Sub-Micro servos that provide full cyclic movement of forward, backward and side-to-side maneuverability. The Blade CX3 also includes a heading lock gyro to provide better control and locked-in performance. As with other co-axial Blade helicopters, no flying experience is required to begin your heli flight with the Blade CX3. This indoor helicopter is 100% factory-assembled, test flown and ready to fly out of the box, no assembly or setup required—and nothing left to buy. The Blade CX3 is the first coaxial heli to incorporate a heading lock gyro, a Spektrum DSM2 2.4GHz radio system and a scale body all in one convenient ready-to-fly package.
MD 520N® is a registered trademark or trademarks of MD Helicopters Inc. and is used under license to Horizon Hobby, Inc.
Specs
Main Rotor Diameter:13.6 in (345mm)
Gross Weight:8.0 oz (227g) w/battery
Length:16.4 in (415mm)
Motor Size:180 Brushed (2 installed)
Kit/ARF/RTF:RTF
Control System:E-flite LP5DSM Transmitter
Needed to Complete
Nothing other than time to fly!
AVAILABLE NOW!
The World's Most Powerful, Ready-To-Race®
Brushless Electric Monster Truck!
Equipped with Castle Creation's Mamba Monster Brushless System
Up to 25.2 Volts of Massive Brushless Power
Includes New Traxxas TQ 2.4GHz Radio System with 4-Channel Micro Receiver
State-of-the-Art Integrated Chassis Design
Heavy-Duty 17mm Splined Aluminum Hex Hubs and Wheel Nuts
Hard-Anodized Teflon®-Coated Aluminum Shocks
Top Speed: 65+mph All-Out, 50+mph Out of the Box!
Built For Brushless
We built the E-Revo for 6S brushless power right from the start. For other companies, brushless ready means just making some nominal provisions for battery and motor installation and letting the aftermarket develop the upgrades necessary to make it survive. Not Traxxas. We heard the call for more power so E-Revo was tested tough for durability with brutal 6S LiPo power and intense custom wound brushless motors. For the uninitiated, this extreme 65+mph motor and battery combination is ordinarily a predictable recipe for a box full of twisted and mangled parts. Not so with the E-Revo Brushless Edition. E-Revo’s driveline has been engineered to endure the kind of horsepower and punishment that’s possible with today’s motor and battery technology. It looks factory because it is factory, complete with a separate motor plate for clean, low-slung single motor installation.
Castle Creations Mamba Monster Brushless System
Built specifically to handle the rigors of large, power-hungry trucks, the Mamba Monster speed control is ready for 6S LiPo power with its massive 6.5mm gold-plated connectors, high-efficiency heatsink, integrated cooling fan and heavy-duty components. The speed control sends its power pulses to a Castle 2200Kv 75mm motor, designed specially for maximum performance and reliability with 6S LiPo power in torque-hungry applications. The aluminum motor can is machined to act as a massive heatsink, high-grade bearings deliver maximum efficiency, and high-strength Neodymium magnets give E-Revo brushless edition outrageous torque. To resist the twist, a beefy 5mm shaft transfers power to Brushless-Ready transmission.
Traxxas TQ 2.4GHz Transmitter
and 4-channel Micro Receiver
All new for E-Revo Brushless edition is Traxxas TQ 2.4GHz radio system. Traxxas' proven ergonomic TQ design now houses spread-spectrum circuitry, eliminating the need for crystals and channels. Just switch on and drive; the 2.4GHz circuitry automatically locates an open channel for glitch-free operation. The new 4-channel micro receiver has an integrated link button for fast syncing with the transmitter.
Low-CG Chassis Design
Engineered by Traxxas, the ground-breaking molded E-Revo chassis sets a new benchmark for electric monster truck looks and performance. The E-Revo chassis combines art and function to deliver a lightweight, integrated, and rigid platform that maximizes strength and reduces weight. Scalable battery compartments accept a variety of NiMH and LiPo configurations to unlock E-Revo Brushless edition's power potential. By combining the battery compartments with the chassis design, the battery packs can sit low and close to the center of the truck, plus valuable chassis surface is freed up to accommodate the electronics for a clean layout. This keeps the center of gravity (CG) as low as possible and increases side-to-side agility by keeping most of the weight close to the center.
Battery Compartment Vents
Resembling the exhaust ducts of a turbine powered jet, the futuristic battery vents are securely mounted on the chassis. In addition to offering entrance and exit cooling, the oversized openings incorporate latches that insert into the battery door clasps. The battery compartment vents symbolize the sleek and high-tech image that places E-Revo in a class of its own.
Quick Release Battery Doors
The futuristic chassis design incorporates enclosed battery compartments into the sides of the chassis for an ultra-clean look even with the battery packs installed. Innovative quick release battery doors mount directly to the chassis, so there are no clips or hold downs to lose during battery swaps. The doors pivot down using a hinged design and dual clasps secure the tops of the battery doors for impact-proof security. To open the battery doors depress the latches and pull on the battery door tabs. To close the doors simply press on the door until the latches snap into place.
Adjustable Battery Compartments
Keyed, adjustable L-braces located inside the battery compartments allow the battery packs to be positioned in multiple incremental positions from front to rear for precise weight bias tuning. A top mounted, spring loaded clip holds battery packs securely at the lowest point to keep the CG as low as possible.
Dual-Servo Steering System
E-Revo takes a total system approach to eliminating the slow, mushy steering response typical on other monster trucks. Each servo is rated for 125 oz.-in. of torque, giving E-Revo a total of 250 oz.-in. of tire-turning twist to keep you in command no matter how tough the conditions.
Leading The Way
There is no other electric monster truck like E-Revo. It embodies the highest level of creativity in design and engineering skill to create the absolute best in monster truck performance. E-Revo is the benchmark that could only come from Traxxas, the leaders in innovation and design.
NEW FEATURES ON E-REVO BRUSHLESS EDITION (MODEL 5608)
Castle Creations Mamba Monster ESC
Castle Creations Mamba Monster 2200KV Motor
Traxxas TQ 2.4GHz Radio
Speed control hold-down securely attaches to the chassis
Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
MODEL 5608: Fully assembled, Ready-To-Race®,
with TQ™ 2.4GHz radio, Castle Creations Mamba Monster ESC
and ProGraphix® painted body.
